| تعداد نشریات | 24 |
| تعداد شمارهها | 917 |
| تعداد مقالات | 8,230 |
| تعداد مشاهده مقاله | 16,274,279 |
| تعداد دریافت فایل اصل مقاله | 13,749,803 |
Finite Element Modeling of Brick Extrusion: Optimizing Die Angle for Uniform Outlet Velocity | ||
| Iranian Journal of Materials Forming | ||
| دوره 13، شماره 4، دی 2026، صفحه 60-70 اصل مقاله (1019.79 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2026.55200.1367 | ||
| نویسندگان | ||
| Abbas Ghaei* ؛ Abolfazl Noh Rouzian | ||
| Department of Mechanical Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran | ||
| چکیده | ||
| Extrusion is a manufacturing process in which material is fed into a chamber and subjected to pressure. A die of the desired shape is placed at the exit of the chamber. The formed material exits the die and takes on the shape of the die cross-section. This study used the Herschel-Bulkley-Papanastasiou (HBP) model as the material model for simulating this process. To optimize product quality, we applied genetic algorithms to assess key parameters influencing the extrusion process, which helped us pinpoint the ideal die angle for achieving a more uniform outlet velocity distribution. The results showed that adjusting the die angle significantly improved flow uniformity, reducing velocity differences at the outlet by up to 60% compared with non-optimized dies. Finally, a physical experiment validated these findings, showing a close match with the predictions from our numerical simulations and optimization results. | ||
| کلیدواژهها | ||
| Brick؛ Extrusion؛ Finite element simulation؛ Optimization؛ Die design | ||
| مراجع | ||
|
[1] Djavanroodi, F., & Ebrahimi, M. (2010). Effect of die parameters and material properties in ECAP with parallel channels. Materials Science and Engineering: A, 527(29), 7593-7599. https://doi.org/10.1016/j.msea.2010.08.022
[2] Engelhardt, M., Kurmajev, S., Maier, J., Becker, C., & Hora, P. (2019). The application of FEA for optimization of die design. Materials Today: Proceedings, 10, 226-233. https://doi.org/10.1016/j.matpr.2018.10.400
[3] Surendarnath, S., Subbiah, R., Sankaranarayanasamy, K., & Ravisankar, B. (2017). Finite element simulation of pure aluminum processed by ECAP using new die design. Materials Today: Proceedings, 4(2), 2544-2553. https://doi.org/10.1016/j.matpr.2017.02.108
[4] Bouzakis, K. D., Efstathiou, K., Paradisiadis, G., & Tsouknidas, A. (2008). Experimental and FEM-supported investigation of wet ceramic clay extrusion for the determination of stress distributions on the applied tools’ surfaces. Journal of the European Ceramic Society, 28, 2117-2127. https://doi.org/10.1016/j.jeurceramsoc.2008.02.027
[5] Arif, A. F. M., Sheikh, A. K., & Qamar, S. Z. (2003). A study of die failure mechanisms in aluminum extrusion. Journal of Materials Processing Technology, 134(3), 318-328. https://doi.org/10.1016/S0924-0136(02)01116-0
[6] Choi, J. C., Park, J. H., & Kim, B. M. (2000). Finite element analysis of the combined extrusion of semi-solid material and its experimental verification. Journal of Materials Processing Technology, 105(1), 49-54. https://doi.org/10.1016/S0924-0136(00)00575-6
[7] Den Bakker, A., Werkhoven, R. J., Sillekens, W. H., & Katgerman, L. (2014). The origin of weld seam defects related to metal flow in the hot extrusion of aluminum alloys EN AW-6060 and EN AW-6082. Journal of Materials Processing Technology, 214, 2349-2358. https://doi.org/10.1016/j.jmatprotec.2014.05.001
[8] Fang, W., Tang, D., Wang, H., Li, D., & Peng, Y. (2019). Optimization of die design for thin-walled flat multi-port tube with the aid of finite element simulation. Journal of Materials Processing Technology, 277, 116418. https://doi.org/10.1016/j.jmatprotec.2019.116418
[9] Olofsson, E. H., Dan, A., Roland, M., Jokil, N., Ramachandran, R., & Hattel, J. (2024). Numerical modeling of fill-level and residence time in starve-fed single-screw extrusion: A dimensionality reduction study from a 3D CFD model to a 2D convection-diffusion model. The International Journal of Advanced Manufacturing Technology, 132, 1-15. https://doi.org/10.1007/s00170-024-13378-1
[10] Tumer, H., & Sonmez, F. O. (2009). Optimum shape design of die and preform for improved hardness distribution in cold forged parts. Journal of Materials Processing Technology, 209(3), 1538-1549. https://doi.org/10.1016/j.jmatprotec.2008.04.017
[11] Wang, X., Sun, K., Liu, Z., Li, L., Li, S., & Li, F. (2021). A novel protection-type porthole die for manufacturing multi-cavity and thin-walled extrusion profile: Numerical simulation, optimization design, and experimental validation. The International Journal of Advanced Manufacturing Technology, 116(5), 1691-1706. https://doi.org/10.1007/s00170-021-07582-6
[12] Yanran, Z., Wang, Z. R., & Weimin, C. (1995). Numerical simulations for extrusion and ironing and die-angle optimization. Journal of Materials Processing Technology, 55(1), 48-52. https://doi.org/10.1016/0924-0136(95)01811-5
[13] Basterfield, R. A., Lawrence, C. J., & Adams, M. (2005). On the interpretation of orifice extrusion data for viscoplastic materials. Chemical Engineering Science, 60, 2599-2607. https://doi.org/10.1016/j.ces.2004.12.019
[14] Faseeva, G. R., Nafikov, R. M., Lapuk, S. E., Zakharov, Y. A., Novik, A. A., Vjuginova, A. A., Kabirov R. R., & Garipov, L. N. (2017). Ultrasound-assisted extrusion of construction ceramic samples. Ceramics International, 43(9), 7202-7210. https://doi.org/10.1016/j.ceramint.2017.03.008
[15] Chauhan, G., Verma, A., Das, A., & Ojha, K. (2018). Rheological studies and optimization of Herschel-Bulkley flow parameters of viscous karaya polymer suspensions using GA and PSO algorithms. Rheologica Acta, 57(3), 267-285. https://doi.org/10.1007/s00397-017-1060-x
[16] Magnon, E., & Cayeux, E. (2021). Precise method to estimate the Herschel-Bulkley parameters from pipe rheometer measurements. Fluids, 6, 157. https://doi.org/10.3390/fluids6040157
[17] COMSOL Multiphysics. (2020). Polymer Flow Module User’s Guide (Version 5.6).
| ||
|
آمار تعداد مشاهده مقاله: 55 تعداد دریافت فایل اصل مقاله: 86 |
||