Experimental Study of Sheet Incremental Forming Process with Controlled Movement of Material into the Forming Cavity

[1] Hamilton, K., & Jeswiet, J. (2010). Single point incremental forming at high feed rates and rotational speeds: Surface and structural consequences. CIRP annals, 59(1), 311-314. https://doi.org/10.1016/j.cirp.2010.03.016

[2] Mirnia, M. J., Mollaei Dariani, B., Vanhove, H., & Duflou, J. R. (2014). An investigation into thickness distribution in single point incremental forming using sequential limit analysis. International Journal of Material Forming, 7(4), 469-477.‏ https://doi.org/10.1007/s12289-013-1143-x

[3] Ghasemi, H., & Soltani, B. (2014). Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming. Modares Mechanical Engineering, 14(1), 89-96. http://mme.modares.ac.ir/article-15-7051-en.html

[4] Mohammadi Najafabadi, H., Ataee, A. A., & Sharififar, M. (2014). Numerical and experimental investigation of incremental sheet metal forming parameters and multi-objective optimization using neural-genetic algorithm. Modares Mechanical Engineering, 14(2), 167-174. http://mme.modares.ac.ir/article-15-11937-en.html

[5] Song, X., Zhang, J., Zhai, W., Taureza, M., Castagne, S., & Danno, A. (2017). Numerical and experimental study of micro single point incremental forming process. Procedia Engineering, 207, 825-830.‏ https://doi.org/10.1016/j.proeng.2017.10.836

[6] Song, X., Zhang, J., Zhai, W., Taureza, M., Castagne, S., & Danno, A. (2018). Numerical and experimental investigation on the deformation mechanism of micro single point incremental forming process. Journal of Manufacturing Processes, 36, 248-254.‏ https://doi.org/10.1016/j.jmapro.2018.10.035

[7] Kumar, A., & Gulati, V. (2018). Experimental investigations and optimization of forming force in incremental sheet forming. Sādhanā, 43(10), 159.‏ ‏https://doi.org/10.1007/s12046-018-0926-7

[8] Mezher, M. T., Khazaal, S. M., Namer, N. S., & Shakir, R. A. (2021). A comparative analysis study of hole flanging by incremental sheet forming process of AA1060 and DC01 sheet metals. Journal of Engineering Science and Technology, 16(6), 4383-4403.‏ https://www.researchgate.net/publication/356788078 

[9] Barimani-Varandi, A., Nasrabadi, M. K., Ravan, B. A., & Javadi, M. (2021). Rapid prototyping of aircraft canopy based on the incremental forming process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(2), 59.‏ https://doi.org/10.1007/s40430-021-02811-1

[10] Karim, B., Mohand, O. O., Nasereddine, Z., & Sébastien, T. (2021). Investigation of the influence of incremental sheet forming process parameters using response surface methodology. Metallurgical Research & Technology, 118(4), 401.‏ https://doi.org/10.1051/metal/2021039

[11] Ben Said, L. (2022). The incremental sheet forming; technology, modeling and formability: A brief review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(6), 2729-2755.‏ https://doi.org/10.1177/09544089221093306

[12] Kharche, A., & Barve, S. (2022). Incremental sheet forming of composite material. Materials Today: Proceedings, 63, 176-184.‏ https://doi.org/10.1016/j.matpr.2022.02.447

[13] Yang, M., Chang, Z., Liu, K., & Chen, J. (2024). Investigation on mechanism in fabricating truncated cone with tooth features of titanium alloy via flexible free incremental forming at room temperature. Journal of Materials Processing Technology, 330, 118472.‏ ‏https://doi.org/10.1016/j.jmatprotec.2024.118472

[14] Prasad, R., Oraon, M., & Sharma, V. (2025). Exploring advancements in incremental sheet metal forming: a review. Engineering Research Express, 7(1), 012401.‏ https://doi.org/10.1088/2631-8695/adac2d

[15] Kim, T. J., & Yang, D. Y. (2000). Improvement of formability for the incremental sheet metal forming process. International Journal of Mechanical Sciences, 42(7), 1271-1286.‏ https://doi.org/10.1016/S0020-7403(99)00047-8

[16] Manco, L., Filice, L., & Ambrogio, G. (2011). Analysis of the thickness distribution varying tool trajectory in single-point incremental forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(3), 348-356.‏ https://doi.org/10.1177/09544054JEM1958

[17] Mirnia, M. J., Mollaei Dariani, B., Vanhove, H., & Duflou, J. R. (2014). Thickness improvement in single point incremental forming deduced by sequential limit analysis. The International Journal of Advanced Manufacturing Technology, 70(9), 2029-2041.‏ https://doi.org/10.1007/s00170-013-5447-2

[18] Duflou, J. R., Verbert, J., Belkassem, B., Gu, J., Sol, H., Henrard, C., & Habraken, A. M. (2008). Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP annals, 57(1), 253-256.‏ https://doi.org/10.1016/j.cirp.2008.03.030

[19] Vahdati, M., Mahdavinejad, R., Amini, S., Abdullah, A., & Abrinia, K. (2015). Design and manufacture of vibratory forming tool to develop" ultrasonic vibration assisted incremental sheet metal forming" process. Modares Mechanical Engineering, 14(11), 68–76. http://mme.modares.ac.ir/article-15-877-en.html

[20] Honarpisheh, M., & Abdolhoseini, M. J. (2017). Experimental and numerical investigation of forming force of Ti6Al4V sheet in electric hot incremental forming process of a conical part. Amirkabir Journal of Mechanical Engineering, 49(2), 143-146.‏ https://doi.org/10.22060/mej.2016.799

[21] Nasiri, H., Soltani, B., & Ghasemi, H. (2014, May 22). Finite element simulation of truncated cone forming from magnesium sheet by single-point incremental forming with laser assistance [Paper presentation]. The 22nd Annual International Conference on Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran.

[22] Yang, Z., Chen, F., Gatea, S., & Ou, H. (2020). Design of the novel hot incremental sheet forming experimental setup, characterization of formability behavior of polyether-ether-ketone (PEEK). The International Journal of Advanced Manufacturing Technology, 106(11), 5365-5381. https://doi.org/10.1007/s00170-020-05035-0

[23] Trzepieciński, T., Oleksik, V., Pepelnjak, T., Najm, S. M., Paniti, I., & Maji, K. (2021). Emerging trends in single point incremental sheet forming of lightweight metals. Metals, 11(8), 1188. https://doi.org/10.3390/met11081188

[24] Tabasum, M. N., Lang, L., Mirza, H. A., Meng, Z., & Blala, H. (2022). Numerical and experimental investigations on the effects of variable cavity pressure on the formability of GLARE using hydromechanical deep drawing. The International Journal of Advanced Manufacturing Technology, 119(9), 6091-6101. ‏https://doi.org/10.1007/s00170-021-08518-w

[25] Shang, M., Li, Y., Chen, K., Yang, M., Zhao, X., & Nie, K. (2023). Incremental forming of hydraulic supports: a numerical and experimental study of thickness distribution. Journal of Mechanical Science and Technology, 37(12), 6477-6491. https://doi.org/10.1007/s12206-023-1120-3

[26] Tiwari, M. K., Gupta, A. K., Shahare, H. Y., Ponappa, K., & Tandon, P. (2023, October). Investigating the material flow and thermal distribution in a hybrid additive manufacturing incremental forming (HAMIF) technology. In ASME International Mechanical Engineering Congress and Exposition (Vol. 87608, p. V003T03A047). American Society of Mechanical Engineers. https://doi.org/10.1115/IMECE2023-116436

[27] Vignesh, G., Narayanan, C. S., & Pandivelan, C. (2025). Review on incremental sheetmetal forming process: deformation mechanisms and recent developments. International Journal of Material Forming, 18(2), 30. https://doi.org/10.1007/s12289-025-01895-7

[28] Palwai, S. R., Bharti, S., Tiwari, A. K., Krishnaswamy, H., & Gurunathan, S. K. (2025). Mathematical approach to design preform for multi stage robot assisted incremental forming. International Journal of Material Forming, 18(3), 62. https://doi.org/10.1007/s12289-025-01927-2

[29] Suchy, I. (2006). Handbook of Die Design, (chapter 1, pp. 29). McGRAW-HILL, New York. https://www.accessengineeringlibrary.com/content/book/9780071462716