Development of the Maximum Rate of Dissipation Criterion to Analyze the Deformation Mechanisms in Semi-Solid State

[1] Atkinson, H. V. (2005). Modelling the semi-solid processing of metallic alloys. Progress in Materials Science, 50(3), 341-412. https://doi.org/10.1016/j.pmatsci.2004.04.003

[2] Wang, W., Guo, E., Phillion, A. B., Eskin, D. G., Wang, T., & Lee, P. D. (2020). Semi-solid compression of nano/ micro-particle reinforced Al-Cu composites: An in-situ synchrotron tomographic study. Materialia, 12, 100817. https://doi.org/10.1016/j.mtla.2020.100817

[3] Li, H., Cao, M., Niu, L., Huang, K., & Zhang, Q. (2021). Establishment of macro-micro constitutive model and deformation mechanism of semi-solid Al6061. Journal of Alloys and Compounds, 854, 157124. https://doi.org/10.1016/j.jallcom.2020.157124

[4] Wang, K., Wang, L., Li, F., Zhang, Z., & Luo, R. (2022). Anisotropic microstructure and thixo-compression deformation behavior of extruded 7075 aluminum alloy in semi-solid state. Materials Science and Engineering: A, 833, 142514. https://doi.org/10.1016/j.msea.2021.142514

[5] Liu, Z., Zhou, R., Xiong, W., He, Z., Liu, T., & Li, Y. (2022). Compressive rheological behavior and microstructure evolution of a semi-solid CuSn10P1 alloy at medium temperature and low strain. Metals 2022, 12(1), 143. https://doi.org/10.3390/met12010143

[6] Boluri Gashti, A. H., Abedi, H. R., & Salehi, M. T. (2023). Microstructure evolution and constitutive modeling of as-cast A356 aluminum alloy in semi-solid deformation regime. Journal of Materials Research and Technology, 24(18), 7720-7731. https://doi.org/10.1016/j.jmrt.2023.05.025

[7] Burgos, G. R., Alexandrou, A. N., & Entov, V. (2001). Thixotropic rheology of semi-solid metal suspensions. Journal of Materials Processing Technology, 110(2), 164-176. https://doi.org/10.1016/S0924-0136(00)00731-7

[8] Modigell, M., & Koke, J. (2001). Rheological modelling on semi-solid metal alloys and simulation of thixocasting processes. Journal of Materials Processing Technology, 111(1-3), 53-58. https://doi.org/10.1016/S0924-0136(01)00496-4

[9] Cézard, P., Favier, V., Bigot, R., Balan, T., & Berveiller, M. (2005). Simulation of semi-solid thixoforging using a micro-macro constitutive equation. Computational Materials Science, 32(3-4), 323-328. https://doi.org/10.1016/j.commatsci.2004.09.036

[10] Favier, V., & Atkinson, H. V. (2011). Micromechanical modelling of the elastic-viscoplastic response of metallic alloys under rapid compression in the semi-solid state. Acta Materialia, 59(3), 1271-1280. https://doi.org/10.1016/j.actamat.2010.10.059

[11] Wang, J., Phillion, A. B., & Lu, G. (2014). Development of a viscoplastic constitutive modeling for thixoforming of AA6061 in semi-solid state. Journal of Alloys and Compounds, 609, 290-295. https://doi.org/10.1016/j.jallcom.2014.04.140

[12] Koeune, R., & Ponthot, J. P. (2014). A one phase thermomechanical model for the numerical simulation of semi-solid material behavior. Application to thixoforming. International Journal of Plasticity, 58, 120-153. https://doi.org/10.1016/j.ijplas.2014.01.004

[13] Gourlay, C. M., Dahle, A. K., Nagira, T., Nakatsuka, N., Nogita, K., Uesugi, K., & Yasuda, H. (2011). Granular deformation mechanisms in semi-solid alloys. Acta Materialia, 59(12), 4933-4943. https://doi.org/10.1016/j.actamat.2011.04.038

[14] Kareh, K. M., Lee, P. D., Atwood, R. C., Connolley, T., & Gourlay, C. M. (2014). Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography. Nature Communications 2014 5:1, 5(1), 4464. https://doi.org/10.1038/ncomms5464

[15] Su, T. C., O’Sullivan, C., Yasuda, H., & Gourlay, C. M. (2020). Rheological transitions in semi-solid alloys: In-situ imaging and LBM-DEM simulations. Acta Materialia, 191, 24-42. https://doi.org/10.1016/j.actamat.2020.03.011

[16] Su, T. C., O’Sullivan, C., Nagira, T., Yasuda, H., & Gourlay, C. M. (2019). Semi-solid deformation of Al-Cu alloys: A quantitative comparison between real-time imaging and coupled LBM-DEM simulations. Acta Materialia, 163(7123), 208-225. https://doi.org/10.1016/j.actamat.2018.10.006

[17] Ansari, M. H. S., & Aghaie Khafri, M. (2017). Predicting flow localization in semi-solid deformation. International Journal of Material Forming 2017 11:2, 11(2), 165-173. https://doi.org/10.1007/s12289-017-1339-6

[18] Sheikh Ansari, M. H., & Aghaie Khafri, M. (2018). Shear localization in semi-solid deformation: A bifurcation theory approach. Mechanics Research Communications, 89, 1-5. https://doi.org/10.1016/j.mechrescom.2018.02.002

[19] Sheikh Ansari, M. H., & Aghaie Khafri, M. (2018). An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials. International Journal of Material Forming 2018 12:4, 12(4), 703-716. https://doi.org/10.1007/s12289-018-1445-0

[20] Sheikh Ansari, M. H., & Aghaie Khafri, M. (2019). Constitutive modeling of semi-solid deformation for the assessment of dilatant shear bands. Applied Mathematical Modelling, 70, 128-138. https://doi.org/10.1016/j.apm.2019.01.028

[21] Esquivel, E. V., & Murr, L. E. (2005). Grain boundary contributions to deformation and solid-state flow in severe plastic deformation. Materials Science and Engineering: A, 409(1-2), 13-23. https://doi.org/10.1016/j.msea.2005.04.063

[22] Ziegler, H.  (1963). Progress in solid mechanic, (Sneddon, I. N., Hill, R., Ed.), New York, 93-193

[23] Ziegler, H. (1983). An introduction to thermomechanics (1st Ed.). North-Holland Publishing Company

[24] Rajagopal, K. R., & Srinivasa, A. R. (1998). Mechanics of the inelastic behavior of materials-part 1, theoretical underpinnings. International Journal of Plasticity, 14(10-11), 945-967. https://doi.org/10.1016/S0749-6419(98)00037-0

[25] Rajagopal, K. R., & Srinivasa, A. R. (1998). Mechanics of the inelastic behavior of materials. Part II: Inelastic response. International Journal of Plasticity, 14(10-11), 969-995. https://doi.org/10.1016/S0749-6419(98)00041-2

[26] Suery, M., & Flemings, M. C. (1982). Effect of strain rate on deformation behavior of semi-solid dendritic alloys. Metallurgical Transactions A 1982, 13(10), 1809-1819. https://doi.org/10.1007/bf02647837

[27] Tzimas, E., & Zavaliangos, A. (1999). Mechanical behavior of alloys with equiaxed microstructure in the semi-solid state at high solid content. Acta Materialia, 47(2), 517-528. https://doi.org/10.1016/S1359-6454(98)00356-5

[28] Nguyen, T. G., Favier, D., & Suery, M. (1994). Theoretical and experimental study of the isothermal mechanical behavior of alloys in the semi-solid state. International Journal of Plasticity, 10(6), 663-693. https://doi.org/10.1016/0749-6419(94)90028-0

[29] Martin, C. L., Brown, S. B., Favier, D., & Suéry, M. (1995). Shear deformation of high solid fraction (> 0.60) semi-solid Sn-Pb under various structures. Materials Science and Engineering: A, 202(1-2), 112-122. https://doi.org/10.1016/0921-5093(95)09797-X

[30] Rudnicki, J. W., & Rice, J. R. (1975). Conditions for the localization of deformation in pressure-sensitive dilatant materials. Journal of the Mechanics and Physics of Solids, 23(6), 371-394. https://doi.org/10.1016/0022-5096(75)90001-0

[31] Hosford, W. F. (1972). A generalized isotropic yield criterion. Journal of Applied Mechanics, 39(2), 607-609. https://doi.org/10.1115/1.3422732

[32] Butcher, C., & Abedini, A. (2017). Shear confusion: Identification of the appropriate equivalent strain in simple shear using the logarithmic strain measure. International Journal of Mechanical Sciences, 134, 273-283. https://doi.org/10.1016/j.ijmecsci.2017.10.005

[33] Ferrante, M., & De Freitas, E. R. (2001). Rheological behavior and deformation characteristics of a commercial and a laboratory-cast Al-4% Cu alloy in the semi-solid state. Acta Materialia, 49(18), 3839-3847. https://doi.org/10.1016/S1359-6454(01)00239-7

[34] Narumi, T., Ohta, K., Ohta, M., Numata, T., Asahi, K., Katsube, R., & Yasuda, H. (2023). Observation of grain motion during semi-solid deformation by using 4D-CT and 3D-XRD. IOP Conference Series: Materials Science and Engineering, 1274(1), 012053. https://doi.org/10.1088/1757-899x/1274/1/012053

[35] Su, T. C., O’sullivan, C., Yasuda, H., & Gourlay, C. M. (2022). Understanding the rheological transitions in semi-solid alloys by a combined in-situ imaging and granular micromechanics modeling approach. Solid State Phenomena, 327, 127-132. https://doi.org/10.4028/www.scientific.net/SSP.327.127

[36] Wu, M., Liu, Y., Wang, T., & Yu, K. (2016). Deformation behavior and characteristics of sintered porous 2024 aluminum alloy compressed in a semi-solid state. Materials Science and Engineering: A, 674, 144-150.  https://doi.org/10.1016/j.msea.2016.07.120

[37] Zhang, C., Zhao, S., Yan, G., & Wang, Y. (2018). Deformation behavior and microstructures of semi-solid A356.2 alloy prepared by radial forging process during high solid fraction compression. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(3), 487-498. https://doi.org/10.1177/0954405416646002

[38] Chino, Y., Kobata, M., Iwasaki, H., & Mabuchi, M. (2003). An investigation of compressive deformation behavior for AZ91 Mg alloy containing a small volume of liquid. Acta Materialia, 51(11), 3309-3318. https://doi.org/10.1016/S1359-6454(03)00162-9

[39] Chen, Y., Yuan, Z., Zhan, H., Zhao, Y., Song, X., Wang, G., & Gu, Y. (2017). Unexpected dynamic recrystallization behavior of Ti-7Cu alloy in semi-solid state. Journal of Alloys and Compounds, 712, 468-476. https://doi.org/10.1016/j.jallcom.2017.04.091

[40] Sheikh Ansari, M. H., & Aghaie Khafri, M. (2019). Effect of semi-solid deformation on the restoration mechanisms and texture evolution in AA7075. JOM 2019, 71(12), 4696-4704. https://doi.org/10.1007/s11837-019-03835-8

[41] Jiang, J., Liu, Y., Xiao, G., Wang, Y., & Xiao, X. (2020). Effects of plastic deformation of solid phase on mechanical properties and microstructure of wrought 5A06 aluminum alloy in directly semi-solid thixoforging. Journal of Alloys and Compounds, 831, 154748. https://doi.org/10.1016/j.jallcom.2020.154748

[42] Prasad, Y. V. R. K., & Rao, K. P. (2011). Materials modeling and finite element simulation of isothermal forging of electrolytic copper. Materials & Design, 32(4), 1851-1858. https://doi.org/10.1016/j.matdes.2010.12.018

[43] Gupta, A. K., Krishnamurthy, H. N., Singh, Y., Prasad, K. M., & Singh, S. K. (2013). Development of constitutive models for dynamic strain aging regime in austenitic stainless steel 304. Materials & Design, 45, 616-627. https://doi.org/10.1016/j.matdes.2012.09.041

[44] Alaneme, K. K., Kareem, S. A., & Bodunrin, M. O. (2023). Hyperbolic-sine constitutive model determined hot deformation mechanisms and workability response of Al-Zn/ Cu and Al-Zn/ SiC based composites. Results in Engineering, 19, 101255. https://doi.org/10.1016/J.RINENG.2023.101255

[45] Xu, X., Zhang, P., Fang, J., Wen, L., Yang, Y., Zhao, Y., & Chen, L. (2024). The hot deformation behavior and processing map analysis of a high-nitrogen austenitic stainless steel. Journal of Materials Research and Technology, 33, 1359-1365. https://doi.org/10.1016/j.jmrt.2024.09.162

[46]  Li, X., Hao, Y., Wang, Y., Shi, H., Wang, X., Hu, X., & Yu, J. (2024). Hot deformation and processing map of in-situ graphene reinforced magnesium matrix nanocomposites. Journal of Alloys and Compounds, 1005, 175978. https://doi.org/10.1016/j.jallcom.2024.175978

[47] Xiao, Y., Deng, Y., An, Y., Yuan, L., Zhan, X., & Wang, B. (2024). Strain rate affects the deformation mechanism of a Ti-55511 titanium alloy: Modeling of constitutive model and 3D processing map using machine learning. Materials Today Communications, 40, 109881. https://doi.org/10.1016/j.mtcomm.2024.109881