| تعداد نشریات | 24 |
| تعداد شمارهها | 851 |
| تعداد مقالات | 7,575 |
| تعداد مشاهده مقاله | 13,413,812 |
| تعداد دریافت فایل اصل مقاله | 11,580,479 |
A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion | ||
| Iranian Journal of Materials Forming | ||
| مقاله 6، دوره 8، شماره 4، دی 2021، صفحه 46-62 اصل مقاله (4.53 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2021.41464.1193 | ||
| نویسندگان | ||
| Mostafa Akbari1؛ Parviz Asadi* 2؛ Hossein Rahimi Asiabaraki3 | ||
| 1Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran | ||
| 2Advanced Materials Processing and Modeling Lab., Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran | ||
| 3Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran | ||
| چکیده | ||
| This study investigates the effect of friction stir back extrusion (FSBE) input parameters such as traverse speed, rotational speed, and wire diameter on the mechanical and microstructural properties of the produced wire. Numerous experiments were performed with different input parameters, and the grain size, hardness, and ultimate pressure strength (UPS) of each of the produced wires were investigated. In addition, to better understand the effect of input parameters, the process was simulated using the finite element method (FEM) model, and the temperature, material flow, and strain distributions in the wires were investigated. Then, using the artificial neural network (ANN), a relationship was obtained between the input parameters of the process, such as traverse speed, rotational speed, and wire diameter, with the mechanical and microstructural properties of the produced wires. This relationship was then used in a hybrid multi-objective optimization to find the optimal process parameters. Due to the higher importance of UPS in comparison to the grain size and microhardness, the weighting of 0.6, 0.2, and 0.2 were used in the TOPSIS model, and the optimum input parameters were achieved as 6 mm, 36.35 mm/min, and 456 rpm, for the traverse speed, rotational speed, and wire diameter, respectively. | ||
| کلیدواژهها | ||
| FSBE؛ Modeling؛ Multi-objective optimization؛ TOPSIS method | ||
| مراجع | ||
|
[1] A. Heidarzadeh, Tensile behavior, microstructure, and substructure of the friction stir welded 70/30 brass joints: RSM, EBSD, and TEM study, Archives of Civil and Mechanical Engineering, 19(1) (2019) 137-146.
[2] A. Heidarzadeh, H.M. Laleh, H. Gerami, P. Hosseinpour, M.J. Shabestari, R. Bahari, The origin of different microstructural and strengthening mechanisms of copper and brass in their dissimilar friction stir welded joint, Materials Science and Engineering: A, 735 (2018) 336-342.
[3] A. Heidarzadeh, R.V. Barenji, V. Khalili, G. Güleryüz, Optimizing the friction stir welding of the α/β brass plates to obtain the highest strength and elongation, Vacuum, 159 (2019) 152-160.
[4] M. Galai, J. Ouassir, M. Ebn Touhami, H. Nassali, H. Benqlilou, T. Belhaj, K. Berrami, I. Mansouri, B. Oauki, α-Brass and (α+β) brass degradation processes in azrou soil medium used in plumbing devices, Journal of Bio- and Tribo-Corrosion, 3(3) (2017) 30.
[5] M.P. Alam, A.N. Sinha, Fabrication of third generation Al–Li alloy by friction stir welding: a review, Sādhanā, 44(6) (2019) 153.
[6] O.M. Jarrah, M.A. Nazzal, B.M. Darras, Numerical modeling and experiments of Friction Stir Back Extrusion of seamless tubes, CIRP Journal of Manufacturing Science and Technology, 31 (2020) 165-177.
[7] M. Saad, O. Jarrah, M. Nazzal, B. Darras, H. Kishawy, Sustainability-based evaluation of friction stir back extrusion of seamless tubular shapes, Journal of Cleaner Production, 267 (2020) 121972.
[8] G. Jamali, S. Nourouzi, R. Jamaati, FSBE process: A technique for fabrication of aluminum wire with randomly oriented fine grains, Materials Letters, 241 (2019) 68-71.
[9] M. Shojaeefard, M. Akbari, P. Asadi, Multi objective optimization of friction stir welding parameters using FEM and neural network, International journal of precision engineering and manufacturing, 15(11) (2014) 2351-2356.
[10] M. Akbari, M.H. Shojaeefard, P. Asadi, A. Khalkhali, Hybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II, Transactions of Nonferrous Metals Society of China, 27(11) (2017) 2317-2333.
[11] M.H. Shojaeefard, R.A. Behnagh, M. Akbari, M.K.B. Givi, F. Farhani, Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm, Materials & Design, 44 (2013) 190-198.
[12] P. Asadi, M. Akbari, H. Karimi-Nemch, 12 - Simulation of friction stir welding and processing, in: M.K.B. Givi, P. Asadi (Eds.), Advances in Friction-Stir Welding and Processing, Woodhead Publishing, 2014, pp. 499-542.
[13] M.H. Shojaeefard, M. Akbari, A. Khalkhali, P. Asadi, Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 232(8) (2018) 637-651.
[14] S. Tutunchilar, M. Haghpanahi, M.K. Besharati Givi, P. Asadi, P. Bahemmat, Simulation of material flow in friction stir processing of a cast Al–Si alloy, Materials & Design, 40 (2012) 415-426.
[15] I. Dinaharan, S. Zhang, G. Chen, Q. Shi, Titanium particulate reinforced AZ31 magnesium matrix composites with improved ductility prepared using friction stir processing, Materials Science and Engineering: A, 772 (2020) 138793.
[16] M. Akbari, A. Khalkhali, S.M.E. Keshavarz, E. Sarikhani, Investigation of the effect of friction stir processing parameters on temperature and forces of Al–Si aluminum alloys, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232(3) (2018) 213-229.
[17] P. Zolghadr, M. Akbari, P. Asadi, Formation of thermo-mechanically affected zone in friction stir welding, Materials Research Express, 6(8) (2019) 086558.
[18] L. Wang, Z. Zhang, H. Zhang, H. Wang, K.S. Shin, The dynamic recrystallization and mechanical property responses during hot screw rolling on pre-aged ZM61 magnesium alloys, Materials Science and Engineering: A, 798 (2020) 140126.
[19] Z. Zhang, D. Liu, Y. Wang, Y. Pang, F. Zhang, Y. Yang, J. Wang, A novel method for preparing bulk ultrafine-grained material: Three dimensional severe plastic deformation, Materials Letters, 276 (2020) 128209.
[20] Q. Wang, Z. Liu, B. Wang, Q. Song, Y. Wan, Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining, The International Journal of Advanced Manufacturing Technology, 82(9) (2016) 1725-1736.
[21] A. Rahimzadeh Ilkhichi, R. Soufi, G. Hussain, R. Vatankhah Barenji, A. Heidarzadeh, Establishing mathematical models to predict grain size and hardness of the friction stir-welded AA 7020 aluminum alloy joints, Metallurgical and Materials Transactions B, 46(1) (2015) 357-365.
[22] M. Akbari, P. Asadi, M.K. Besharati Givi, G. Khodabandehlouie, 13 - Artificial neural network and optimization, in: M.K.B. Givi, P. Asadi (Eds.), Advances in Friction-Stir Welding and Processing, Woodhead Publishing, 2014, pp. 543-599.
[23] Y.C. Du, A. Stephanus, Levenberg-Marquardt neural network algorithm for degree of arteriovenous fistula stenosis classification using a dual optical photoplethysmography sensor, Sensors, 18(7) (2018) 2322.
[24] P. Asadi, M. Akbari, M.K. Besharati Givi, M. Shariat Panahi, Optimization of AZ91 friction stir welding parameters using Taguchi method, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 230(1) (2016) 291-302. | ||
|
آمار تعداد مشاهده مقاله: 398 تعداد دریافت فایل اصل مقاله: 268 |
||