| تعداد نشریات | 24 |
| تعداد شمارهها | 859 |
| تعداد مقالات | 7,631 |
| تعداد مشاهده مقاله | 13,515,239 |
| تعداد دریافت فایل اصل مقاله | 11,637,824 |
WARPAGE PREDICTION IN PLASTIC INJECTION MOLDED PART USING ARTIFICIAL NEURAL NETWORK | ||
| Iranian Journal of Science and Technology Transactions of Mechanical Engineering | ||
| شناسنامه علمی شماره، دوره 37، شماره 2، دی 2013، صفحه 149-160 اصل مقاله (421.38 K) | ||
| شناسه دیجیتال (DOI): 10.22099/ijstm.2013.1744 | ||
| چکیده | ||
| The main objective of this paper is to predict the warpage of a circular injection molded part based on different processing parameters. The selected part is used as spacers in automotive, transmission, and industrial power generation industries. The second goal is facilitating the setup of injection molding machine without (any) need for trial and error and reducing the setup time. To meet these objectives, an artificial neural network (ANN) model was presented. This model is capable of warpage prediction of injection molded plastic parts based on variable process parameters. Under different settings, the process was simulated by Moldflow and the warpage of the part was obtained. Initially, the effects of the melt temperature, holding pressure and the mold temperature on warpage were numerically analyzed. In the second step, a group of data that had been obtained from analysis results was used for training the ANN model. Also, another group of data was applied for testing the amount of ANN model prediction error. Finally, maximum error of ANN prediction was determined. The results show that the R-Squared value for data used for training of ANN is 0.997 and for the test data, is 0.995. | ||
| کلیدواژهها | ||
| Plastic injection molding؛ warpage؛ Artificial Neural Network | ||
|
آمار تعداد مشاهده مقاله: 3,869 تعداد دریافت فایل اصل مقاله: 7,983 |
||