Effect of Welding Processes on Texture and Anisotropy of HSLA Steel Sheet | ||
| Iranian Journal of Materials Forming | ||
| دوره 9، شماره 4، دی 2022، صفحه 44-55 اصل مقاله (3.11 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2023.44992.1240 | ||
| نویسندگان | ||
| M. Golmohammadi؛ M. Aghaie-khafri* | ||
| Faculty of Materials Science and Engineering, K.N. Toosi University of Technology, Postal Code: 1999143344, Tehran, Iran | ||
| چکیده | ||
| In the present investigation, the effect of welding processes on the microstructure, crystallographic texture, mechanical properties, and anisotropy of weldment joints of a high strength low alloy steel (HSLA) was studied. The main goal of this research is to establish the relationship between microstructure, texture evolutions, and mechanical properties of the weldments. GTAW and SMAW welding processes were conducted, and macro texture of samples was investigated with the X-ray diffraction technique. Mechanical properties were evaluated by using the uniaxial tensile test in three directions of 0, 45, and 90° to the weld line and a micro hardness test. Preferred orientation in the weldment develops in different welding processes based on the initial base metal texture. The texture of the base metal consisted of γ-fiber, α-fiber, G {110} <001>, and R-Cube {001} <110> main components that evolves during the welding processes. Weakening of the γ-fiber texture component results in a significant reduction in the mechanical properties of the weldments. Moreover, the percentage of the γ-fiber component in the GTAW sample is greater than the SMAW sample, which results in superior mechanical properties. | ||
| کلیدواژهها | ||
| HSLA steel؛ Anisotropy؛ Macro texture؛ Mechanical properties؛ Welding | ||
| مراجع | ||
|
[1] S.R. Nathan, V. Balasubramanian, S. Malarvizhi, A.G. Rao, Effect of welding processes on mechanical and microstructural characteristics of high strength low alloy naval grade steel joints, Defence Technology, 11(3) (2015) 308-317.
[2] D.A. Skobir, High-strength low-alloy (HSLA) steels, Materials and Technology, 45(4) (2011) 295-301.
[3] Z. Jia, R.D.K. Misra, R. O’malley, S.J. Jansto, Fine-scale precipitation and mechanical properties of thin slab processed titanium-niobium bearing high strength steels, Materials Science and Engineering: A, 528(22–23) (2011) 7077-7083.
[4] S.K. Dhua, D. Mukerjee, D.S. Sarma, Influence of tempering on the microstructure and mechanical properties of HSLA-100 steel plates, Metallurgical and Materials Transactions A, 32(9) (2001) 2259-2270.
[5] P. Hariprasath, P. Sivaraj, V. Balasubramanian, S. Pilli, K. Sridhar, Effect of the welding technique on mechanical properties and metallurgical characteristics of the naval grade high strength low alloy steel joints produced by SMAW and GMAW, CIRP Journal of Manufacturing Science and Technology, 37 (2022) 584-595.
[6] T.B. Hilditch, T. De Souza, P.D. Hodgson, Properties and automotive applications of Advanced High-Strength Steels (AHSS), In Welding and joining of advanced high strength steels (AHSS), Woodhead Publishing, 2015, pp. 9-28.
[7] N.J. Den Uijl, L.J. Carless, Advanced metal-forming technologies for automotive applications, In Advanced materials in automotive engineering, Woodhead Publishing, 2012, pp. 28-56.
[8] S.G. Jansto, Niobium-bearing steel development for value-added structural applications, New developments on metallurgy and applications of high strength steels; TMS: Warrendale, PA, USA, 2008, pp. 1313-1326.
[9] K.K. Ramachandran, N. Murugan, S.S. Kumar, Effect of tool axis offset and geometry of tool pin profile on the characteristics of friction stir welded dissimilar joints of aluminum alloy AA5052 and HSLA steel, Materials Science and Engineering: A, 639 (2015) 219-233.
[10] S. Vervynckt, K. Erbeken, B. Lopez, J.J. Jonas, Modern HSLA steels and role of non-recrystallisation temperature, International Materials Reviews, 57(4) (2012) 187-207.
[11] Y. Liu, L. Shi, C. Liu, L. Yu, Z. Yan, H. Li, Effect of step quenching on microstructures and mechanical properties of HSLA steel, Materials Science and Engineering: A, 675 (2016) 371-378.
[12] H.J. Kong, C. Xu, C.C. Bu, C. Da, J.H. Luan, Z.B. Jiao, G. Chen, C.T. Liu, Hardening mechanisms and impact toughening of a high-strength steel containing low Ni and Cu additions, Acta Materialia, 172 (2019) 150-160.
[13] Q. Fang, L. Zhao, B. Liu, C. Chen, Y. Peng, Z. Tian, F. Yin, Microstructure and mechanical properties of 800-MPa-class high-strength low-alloy steel part fabricated by wire arc additive manufacturing, Journal of Materials Engineering and Performance, 31 (2022) 7461-7471.
[14] K. Kornokar, F. Nematzadeh, H. Mostaan, A. Sadeghian, M. Moradi, D.G. Waugh, M. Bodaghi, Influence of heat input on microstructure and mechanical properties of gastungsten arc welded HSLA S500MC steel joints, Metals, 12(4) (2022) 565.
[15] M.H.A Musa, M.A. Maleque, M.Y. Ali, An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel, Materials Science and Engineering, 290(1) (2018) 012041.
[16] M. Mukherjee, T.K. Pal, Influence of mode of metal transfer on microstructure and mechanical properties of gas metal arc-welded modified ferritic stainless steel, Metallurgical and Materials Transactions A, 43(6) (2012) 1791-1808.
[17] L.G. Hector, Y.L. Chen, S. Agarwal, C.L. Briant, Texture characterization of autogenous Nd: YAG laser welds in AA5182-O and AA6111-T4 aluminum alloys, Metallurgical and Materials Transactions A, 35(9) (2004) 3032-3038.
[18] M. Venkateshkannan, N. Arivazhagan, M. Nageswara Rao, G. Madhusudhan Reddy, Characterization of weld joints produced by continuous wave and double pulse gas metal arc welding in naval grade high-strength low-alloy steel, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, (2022) 09544089221126430.
[19] A.K. Perka, M. John, U.B. Kuruveri, P.L. Menezes, Advanced high-strength steels for automotive applications: arc and laser welding process, properties, and challenges, Metals, 12(6) (2022) 1051.
[20] F.F. Chen, J. Xiang, D.G. Thomas, A.B. Murphy, Model-based parameter optimization for arc welding process simulation, Applied Mathematical Modelling, 81 (2020) 386-400.
[21] S.P. Tewari, A. Gupta, J. Prakash, Effect of welding parameters on the weldability of material, International Journal of Engineering Science and Technology, 2(4) (2010) 512-516.
[22] S.I.A. Talabi, O.B.B. Owolabi, J.A.A. Adebisi, Effect of welding variables on mechanical properties of low carbon steel welded joint, Advances in Production Engineering & Management, 9(4) (2014) 181-186.
[23] D. Simhachalam, M.S.S. Rao, B.N. Raju, Evaluation of mechanical properties of stainless steel (ss 304) by tig welding at heat affected zone, International Journal of Engineering and Management Research (IJEMR), 5(4) (2015) 214-221.
[24] R. Lal, M. Shuaib, V. Paliwal, Comparative study of mechanical properties of TIG welded joints of similar and dissimilar grades of Stainless Steel material, International Journal of Advance Research and Innovation, 6(3) (2018) 205-208.
[25] J. Yan, M. Gao, X. Zeng, Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding, Optics and Lasers in Engineering, 48(4) (2010) 512-517.
[26] S. Saha, M. Mukherjee, T.K. Pal, Microstructure, texture, and mechanical property analysis of gas metal arc welded AISI 304 austenitic stainless steel, Journal of Materials Engineering and Performance, 24(3) (2014) 1125-1139.
[27] P. Yan, Ö.E. Güngör, P. Thibaux, H.K. Bhadeshia, Crystallographic texture of induction-welded and heat-treated pipeline steel, Advanced Materials Research, 89 (2010) 651-656.
[28] M. Gustafsson, M. Thuvander, E.L. Bergqvist, E. Keehan, L. Karlsson, Effect of welding procedure on texture and strength of nickel based weld metal, Science and Technology of Welding and Joining, 12(6) (2007) 549-555.
[29] L. Wang, P. Zhou, Y. Hu, B. Wang, Effect of microstructure and texture on the mechanical properties in high strength pipeline bend, International Journal of Pressure Vessels and Piping, 195 (2022) 104604.
[30] Technical handbook of Bohler welding products, 8605 Kapfenberg/Austria, 2005.
[31] K. Kumar, A. Pooleery, K. Madhusoodanan, R.N. Singh, J.K. Chakravartty, B.K. Dutta, R.K. Sinha, Use of miniature tensile specimen for measurement of mechanical properties, Procedia Engineering, 86 (2014) 899-909.
[32] H.K. Bhadeshia, Strong ferritic-steel welds, Materials Science Forum, 539 (2007) 6-11.
[33] P.G. Jonsson, A.B. Murphy, J. Szekely, The influence of oxygen additions on argon-shielded gas metal arc welding processes, Welding Research Supplement, 74(2) (1995) 48-57.
[34] C.H. Lee, H.K.D.H. Bhadeshia, H.C. Lee, Effect of plastic deformation on the formation of accicular ferrite, Materials Science Engineering: A, 360 (1-2) (2003) 249-257.
[35] P.A.Ş.A. Yayla, E. Kaluc, K. Ural, Effects of welding processes on the mechanical properties of HY 80 steel weldments, Materials & Design, 28(6) (2007) 1898-1906.
[36] W. Sun, G. Wang, J. Zhang, D. Xia, H. Sun, Microstructure characterization of high-heat-input welding joint of HSLA steel plate for oil storage construction, Journal of Materials Science & Technology, 25(6) (2009) 857.
[37] L. Seidel, M. Hölscher, K. Lücke, Rolling and recrystallization textures in iron-3% silicon, Texture and Microstructure, 11(2-4) (1989) 171-185.
[38] A.A. Vasilyev, N.Y. Zolotorevsky, D.F. Sokolov, S.A. Philippov, Crystallographic texture of industrial automotive steels and effect of tertiary cementite dissolution on its development, Materials Physics & Mechanics, 47(3) (2021) 399-407.
[39] R.K. Ray, J.J. Jonas, R.E. Hook, Cold rolling and annealing texture in low carbon and extra low carbon steels, International Materials Reviews, 39(4) (1994) 129-172.
[40] R.K. Ray, P. Ghosh, Texture in the design of advanced steels, Transactions of the Indian Institute of Metals, 66(5) (2013) 641-653.
[41] S. Hoile, Processing and properties of mild interstitial free steels, Materials Science and Technology, 16(10) (2000) 1079-1093.
[42] T. Ogawa, Y. Suzuki, Y. Adachi, A. Yamaguchi, Y. Matsubara, Effect of cold-rolling directions on recrystallization texture, Materials, 15(9) (2022) 3083.
[43] N.D.A. Sardinha, I.C.D. Santos, B.V. Andrade, R.A. Botelho, R.V.D. Oliveria, S.B. Diniz, A.D.S. Paula, Mechanical properties and crystallographic texture of symmetrical and asymmetrical cold rolled IF steels, Materials Research, 19(5) (2016) 1042-1048. | ||
|
آمار تعداد مشاهده مقاله: 208 تعداد دریافت فایل اصل مقاله: 293 |
||