Field evaluation of a bent leg tillage implement | ||
| Iran Agricultural Research | ||
| مقاله 7، دوره 40، شماره 2، خرداد 2022، صفحه 51-60 اصل مقاله (1.3 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/iar.2022.40632.1440 | ||
| نویسندگان | ||
| Aliakbar ُSolhjou* ؛ Mohammad Shaker | ||
| Agricultural Engineering Research Department, Fars Agricultural and Natural Resources and Education Centre, Agricultural Research, Education and Extension Organization, Shiraz I. R. Iran. | ||
| چکیده | ||
| This study was aimed to determine the effect of the geometry of a bent leg tillage implement on draft force and specific draft. This research designed as a split-split plot experiment with three replications. Treatments were three soil moisture content levels of 7-10, 10-13 and 13-16 % as main plots, three forward speeds of 5, 7.5 and 10 km h-1 as sub-plots and three lateral blade spacing of 12, 16 and 20 cm as sub-sub-plots. Results indicated that forward speed, lateral blade spacing and soil moisture content affected draft force and specific draft. Reducing soil moisture content from 13-16% to 7-10% increased draft force by 12% and reduced specific draft by 9%. Increasing forward speed from 5 to 10 km h-1 increased draft force and specific draft by 71.8% and 70.7%, respectively. The lateral blade spacing of 16 and 20 cm was recognized to be proper for tilling by the bent leg tillage implement. Other findings showed that the geometry and characteristics of the bent leg tillage have the potential to have reduced draft force at higher levels of the forward speed. | ||
| کلیدواژهها | ||
| Bent leg؛ Blade geometry؛ Draft force؛ Forward speed | ||
| مراجع | ||
|
Abbaspour-Fard, M. H., Hoseini, S. A., Aghkhani, M. H., & Sharifi, A. (2014). The behavior of tillage tools with acute and obtuse lift angles. Spanish Journal of Agricultural Research, 12(1), 44-51. Al-Neama, A. K. & Herlitzius, T. (2017). Draft forces prediction model for standard single tines by using principles of soil mechanics and soil profile evaluation. Landtechnik, 72(3), 157-164. Askari, M., Shahgholi, G., & Abaspour-Gilandeh, Y. (2017). The effect of tine, wing, operating depth and speed on the draft requirement of subsoil tillage tines. Research Agricultural Engineering, 63(4), 160-167. Barr, J. B., Desbiolles, J., & Fielke, J. (2016). Minimising soil disturbance and reaction force for high speed sowing using bentleg furrow openers. Biosystems Engineering, 151, 53-64. Barr, J. B., Desbiolles, J., Fielke, J., & Ucgul, M. (2019). Development and field evaluation of a high-speed no-till seeding system. Soil and Tillage Research, 194, 104337. Barr, J. B., Desbiolles, J., Ucgul, M., & Fielke, J. (2020). Bent leg furrow opener performance analysis using the discrete element method. Biosystems Engineering, 189, 99-115. Dehghani, M., & Karparvarfars, S. H. (2017). Optimizing of chisel tine operation used in combined tillage machine. Iranian Journal of Biosystems Engineering, 47(4), 651-658. Esehaghbeygi, A., Tabatabaeefar, A., Keyhani, A. R., & Raoufat, M. H. (2005). Depth and rake angle’s influence on the draft force of an oblique blade subsoiler. Iran Agricultural Science, 36(4), 1045-1052. Fielke, J. M. (1996). Interactions of the cutting edge of tillage implements with soil. Journal of Agricultural Engineering Research, 63(1), 61-72. Godwin, R. J. (2007). A review of the effect of implement geometry on soil failure and implement forces. Soil and Tillage Research, 97(2), 331-340. Godwin, R. J., & Spoor, G. (1977). Soil failure with narrow tine. Journal of Agricultural Engineering Research, 22(3), 213-228. Godwin, R. J., Spoor, G., & Soomro, M. S. (1984). The effect of tine arrangement on soil forces and disturbance. Journal of Agricultural Engineering Research, 30, 47-56. Godwin, R. J., & O'Dogherty, M. J. (2007). Integrated soil tillage force prediction models. Journal of Terramechanics, 44 (1), 3-14. Harrison, H. P. (1990). Soil reacting force for two, tapered bentleg plows. Transactions of the ASAE, 33(5), 1473-1476. Hoseini, S., & Karparfard, S. H. (2012). A prediction of force acting on chisel plow tine through dimensional analysis method (dimensional analysis approach). Iranian Journal of Biosystems Engineering, 43(1), 93-103. Kepner, R. A., Bainer, R., & Barger, E. L. (1978). Principles of farm machinery, chapter 5. New York: The AVI Publishing Company Majidi, H., & Raoufat, M. H. (1997). Power requirement of a bentleg plow and its effects on soil physical conditions. Iran Agricultural Research, 16, 1-16. Manuwa, S. I., & Ademosun, O. C. (2007). Draught and soil disturbance of model tillage tines under varying soil parameters. Agricultural Engineering International: CIGR Journal, 6(16), 1-18. Moeenifar, A., Mousavi-Seyedi, S. R., & Kalantari, D. (2014). Influence of tillage depth, penetration angle and forward speed on the soil/tine-blade interaction force. Agricultural Engineering International: CIGR Journal, 16 (1), 69-74. Naderloo, L., Alimardani, R., Akram, A., Javadikia, P., & Zeinali Khanghah, H. (2009). Tillage depth and forward speed effects on draft of three primary tillage implements in clay loam soil. Journal of Food, Agriculture and Environment, 7(3 & 4), 382-385. Payne, P. C. J., & Tanner, D. W. (1959). The relationship between rake angle and the performance of simple cultivation implements. Journal of Agricultural Engineering Research, 4(4), 312-325. Rahmatian, M., Karparvarfard, S. H., & Nematollahi, M. A. (2018). Prediction for optimizing performance of chisel blade used in combined tillage to obtain suitable effectiveness. Iran Journal of Biosystems Engineering, 49(1), 73-82. Raoufat, M. H., & Mashadi Mighani, H. (1999). Appropriate tine spacing of a double bentleg plow for better tillage and efficient performance. Iranian Journal of Agricultural Science, 30(2), 319-330. Raoufat, M. H. & Firozi, S. (1998). Field evaluation of a dual bentleg plow. Iran Agricultural Research, 17, 67-82. Regional Network for Agricultural Machinery. (1983). RNAM test codes and procedures for farm machinery. Technical series No. 12, Bangkok, Thailand. 129 pp. Rosa, U. A., & Wulfsohn, D. (2008). Soil bin monorail for high-speed testing of narrow tillage tools. Biosystems Engineering, 99(3), 444-454. Salar, M. R., & Karparverfard, S. H. (2017). Modeling and optimization of wing geometry effect on draft and vertical force of winged chisel plow. Journal of Agricultural Machinery, 7, 468-479. Sharifat, K. (1999). Soil translocation with tillage tools. (Doctoral dissertation, University of Saskatchewan, Canada). Solhjou, A., & Alavimanesh, S. M. (2019). Effect of soil moisture, forward speed and bent leg blade spaces on soil pulverization. Journal of Engineering Research in Agricultural Mechanization and Systems, 73(20), 83-92. Solhjou, A., Desbiolles, J., & Fielke, J. (2013). Soil translocation by narrow openers with various blade face geometries. Biosystems Engineering, 114(3), 259-266. Solhjou, A., Fielke, J., & Desbiolles, J. (2012). Soil translocation by narrow openers with various rake angles. Biosystems Engineering, 112(1), 65-73. Solhjou, A., Fielke, J., Desbiolles, J., & Saunders, C. (2014). Soil translocation by narrow openers with various bent leg geometries. Biosystems Engineering, 127, 41-49. | ||
|
آمار تعداد مشاهده مقاله: 271 تعداد دریافت فایل اصل مقاله: 392 |
||