Effect of Multidirectional Forging on Microstructure, Mechanical Properties and Corrosion Behavior of Biodegradable Zn-0.5Mg Alloy

[1] Shishir, R., Nasiruddin, U., Manojkumar, P., Lokeshkumar, E., Ponnilavan, V., Parfenov, E. V., Valiev, R. Z., & Rameshbabu, N. (2023). Zinc as a potential bio-degradable temporary implant material. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.09.009

[2] Sułkowski, B., Pałka, P., Boczkal, G., Lee, R., Horky, J., Zehetbauer, M. J., & Schafler, E. (2025). Mechanical and corrosion properties of Zn-0.5 Mg and Zn-1.0 Mg alloys processed by HPT. Materials Science and Engineering: A, 930, 148139. https://doi.org/10.1016/j.msea.2025.148139

[3] Kabir, H., Munir, K., Wen, C., & Li, Y. (2021). Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives. Bioactive Materials, 6(3), 836-879. https://doi.org/10.1016/j.bioactmat.2020.09.013

[4] Akbari, F., Golkaram, M., Beyrami, S., Shirazi, G., Mantashloo, K., Taghiabadi, R., Yazdi, M. S., & Ansarian, I. (2024). Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy. International Journal of Minerals, Metallurgy and Materials, 31(2), 362-373. https://doi.org/10.1007/s12613-023-2764-9

[5] Mostaed, E., Sikora-Jasinska, M., Drelich, J. W., & Vedani, M. (2018). Zinc-based alloys for degradable vascular stent applications. Acta Biomaterialia, 71, 1-23. https://doi.org/10.1016/j.actbio.2018.03.005

[6] Ji, C., Ma, A., Jiang, J., Song, D., Liu, H., & Guo, S. (2024). Research status and future prospects of biodegradable Zn-Mg alloys. Journal of Alloys and Compounds, 993, 174669. https://doi.org/10.1016/j.jallcom.2024.174669

[7] Milenin, A., Kustra, P., Lelek-Borkowska, U., Wróbel, M., Marzec, M., Sulej-Chojnacka, J., Półrolniczak, J., Polkowska, I., & Nowicka, B. (2024). In vitro and in vivo degradation of the new dissolvable surgical wire, produced from Zn based low alloy by hot and cold drawing. Metallurgical and Materials Transactions A, 55(9), 3434-3449. https://doi.org/10.1007/s11661-024-07470-0

[8] Jin, H., Zhao, S., Guillory, R., Bowen, P. K., Yin, Z., Griebel, A., Schaffer, J., Earley, E. J., Goldman, J., & Drelich, J. W. (2018). Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation. Materials Science and Engineering: C, 84, 67-79. https://doi.org/10.1016/j.msec.2017.11.021

[9] Li, R., Ding, Y., & Zhang, H. (2023). Toughness and strength coordination in a low-alloy Zn–0.5 Mg alloy via extrusion and post-deformation annealing. Metals and Materials International, 29(10), 2807-2825. https://doi.org/10.1007/s12540-023-01420-y

[10] Pieła, K., Błaż, L., Bochniak, W., Ostachowski, P., Łagoda, M., Żabiński, P., Jaskowski, M., Kiper, M., & Polkowska, A. (2019). Self-hardening of low-alloyed zinc for biodegradable application. Journal of Alloys and Compounds, 810, 151883. https://doi.org/10.1016/j.jallcom.2019.151883

[11] Voshage, M., Megahed, S., Schückler, P. G., Wen, P., Qin, Y., Jauer, L., Poprawe, R., & Schleifenbaum, J. H. (2022). Additive manufacturing of biodegradable Zn-xMg alloys: Effect of Mg content on manufacturability, microstructure and mechanical properties. Materials Today Communications, 32, 103805. https://doi.org/10.1016/j.mtcomm.2022.103805

[12] Hashemizarandi, S., Riazat, A., Emami, M., & Taghiabadi, R. (2025). Effect of multi-pass multidirectional forging on microstructure and corrosion behavior of Zn-1Fe biodegradable alloy. Journal of Alloys and Compounds, 1038, 182810. https://doi.org/10.1016/j.jallcom.2025.182810

[13] Ge, G., He, X., Guo, Y., Yang, G., Liang, Y., Zhai, Y., Wang, S., Yin, Y., & Lin, J. (2026). Refining microstructure and enhancing mechanical properties of high Nb containing TiAl alloy via multidirectional forging. Materials Science and Engineering: A, 964, 150233. https://doi.org/10.1016/j.msea.2026.150233

[14] Taghiabadi, R., & Moharami, A. (2021). Mechanical properties enhancement of Mg–4Si in-situ composites by friction stir processing. Materials Science and Technology, 37(1), 66-77.

[15] Naik, M. V., Narasaiah, N., Chakravarthy, P., & Kumar, R. A. (2024). Microstructure and mechanical properties of friction stir processed Zn-Mg biodegradable alloys. Journal of Alloys and Compounds, 970, 172160. https://doi.org/10.1016/j.jallcom.2023.172160

[16] Lu, K., Ma, L., Fu, T., Cui, Q., & Ji, S. (2024). Changes in effective grain delineation criteria induced by strong texturing of Zn-0.15Mg alloys after friction stir processing. Materials Letters, 357, 135751. https://doi.org/10.1016/j.matlet.2023.135751

[17] Soustani, M. F., Taghiabadi, R., Jafarzadegan, M., & Vasheghani Farahani, M. (2019). Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast Al-7Fe-5Ni alloy. Materials Research Express, 6(10), 106571. https://doi.org/10.1088/2053-1591/ab3829

[18] Dong, Z., Han, C., Zhao, Y., Huang, J., Ling, C., Hu, G., Wang, Y., Wang, D., Song, C., & Yang, Y. (2024). Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion. International Journal of Extreme Manufacturing, 6(4), 045003. https://doi.org/10.1088/2631-7990/ad3929

[19] Vida, T. A., Brito, C., Lima, T. S., Spinelli, J. E., Cheung, N., & Garcia, A. (2019). Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties. Current Applied Physics, 19(5), 582-598. https://doi.org/10.1016/j.cap.2019.02.013

[20] Lu, Y. U. (2014). Microstructure and degradation behaviour of Mg-Zn (-Ca) alloys [Doctoral dissertation, University of Birmingham].

[21] Liu, Z., Qiu, D., Wang, F., Taylor, J. A., & Zhang, M. (2016). Effect of Grain Refinement on Tensile Properties of Cast Zinc Alloys. Metallurgical and Materials Transactions A, 47(2), 830-841. https://doi.org/10.1007/s11661-015-3229-1

[22] Ganjehfard, K., Taghiabadi, R., Noghani, M. T., & Ghoncheh, M. H. (2021). Tensile properties and hot tearing susceptibility of cast Al-Cu alloys containing excess Fe and Si. International Journal of Minerals, Metallurgy and Materials, 28(4), 718-728. https://doi.org/10.1007/s12613-020-2039-7

[23] Stolyarov, V. V., Zhu, Y. T., Alexandrov, I. V., Lowe, T. C., & Valiev, R. Z. (2001). Influence of ECAP routes on the microstructure and properties of pure Ti. Materials Science and Engineering: A, 299(1), 59-67. https://doi.org/10.1016/S0921-5093(00)01411-8

[24] Huang, H., Li, G., Jia, Q., Bian, D., Guan, S., Kulyasova, O., Valiev, R. Z., Rau, J. V., & Zheng, Y. (2022). Recent advances on the mechanical behavior of zinc based biodegradable metals focusing on the strain softening phenomenon. Acta Biomaterialia, 152, 1-18. https://doi.org/10.1016/j.actbio.2022.08.041

[25] Aghajani, S., & Alizadeh, R. (2024). Severe plastic deformation of Zn and Zn-based alloys. Journal of Materials Research and Technology, 33, 6508-6533. https://doi.org/10.1016/j.jmrt.2024.10.240

[26] Purcek, G., Altan, B. S., Miskioglu, I., & Ooi, P. H. (2004). Processing of eutectic Zn–5% Al alloy by equal-channel angular pressing. Journal of Materials Processing Technology, 148(3), 279-287. https://doi.org/10.1016/j.jmatprotec.2004.02.010

[27] Cao, F., Liu, R., Kong, S., Guo, N., Xu, P., & Xu, G. (2023). Microstructural evolution, high temperature tensile deformation behavior, and deformation mechanism in an Mg–Zn–Y–Ca–Zr alloy processed by multidirectional forging and hot rolling. Journal of Materials Research and Technology, 27, 6729-6743. https://doi.org/10.1016/j.jmrt.2023.11.145

[28] Mollaei, N., Fatemi, S. M., Aboutalebi, M. R., Razavi, S. H., & Bednarczyk, W. (2025). Microstructure, texture, mechanical properties, and corrosion behavior of biodegradable Zn-0.2Mg alloy processed by multi-directional forging. Acta Metallurgica Sinica (English Letters), 38(3), 507-525. https://doi.org/10.1007/s40195-024-01792-z

[29] Yousefi, D., Taghiabadi, R., & Shaeri, M. H. (2021). Effect of multi-pass multi-directional forging on tribological properties of Si-rich eutectoid ZA alloys. Transactions of Nonferrous Metals Society of China, 31(7), 2024-2038. https://doi.org/10.1016/S1003-6326(21)65635-2

[30] Wang, L., Lou, D., Sun, S., Ren, Y., Qin, G., Bai, P., & Zhao, Z. (2022). Microstructure evolution of Zn–0.2 Mg–0.8 Mn (wt-%) alloys with different initial textures during room-temperature compression. Materials Science and Technology, 38(16), 1368-1375. https://doi.org/10.1080/02670836.2022.2078936

[31] Akbari, F., Taghiabadi, R., Yazdi, M. S., & Ansarian, I. (2024). Tribology characteristics of novel Zn–Si alloys severely deformed by multi-directional forging. Archives of Civil and Mechanical Engineering, 24(4), 225. https://doi.org/10.1007/s43452-024-01033-1

[32] He, L., Cai, J., Wang, Y., Zhang, Y., Xiao, L., Chen, Z., Chen, W., Yu, H., Li, X., Zhang, Q., & Wang, X. (2026). Twin-induced strengthening biodegradable ZnMg alloys for the orthopedic implants. Biomaterials Advances, 183, 214772. https://doi.org/10.1016/j.bioadv.2026.214772

[33] Neres da Silva, N. A., Pereira, P. H. R., Siqueira Corrêa, E. C., Paulino Aguilar, M. T., & Cetlin, P. R. (2021). Microstructural evolution and mechanical properties in a Zn–Al–Cu–Mg hypoeutectic alloy processed by multi-directional forging at room temperature. Materials Science and Engineering: A, 801, 140420. https://doi.org/10.1016/j.msea.2020.140420

[34] Liu, Z., Qiu, D., Wang, F., Taylor, J. A., & Zhang, M. (2015). Grain refinement of cast zinc through magnesium inoculation: Characterisation and mechanism. Materials Characterization, 106, 1-10. https://doi.org/10.1016/j.matchar.2015.05.011

[35] Sun, Z., Zhu, X., Li, M., Yang, L., Jiang, J., Zhang, Q., & Song, Z. (2026). Microstructure evolution, mechanical properties, degradation properties, and cytocompatibility of high-strength and high-toughness Zn-0.45Li ultrafine wire. Journal of Alloys and Compounds, 1066, 188285. https://doi.org/10.1016/j.jallcom.2026.188285

[36] Rana, K., Razaghian, A., Moharami, A., & Taghiabadi, R. (2026). Achieving synergistic strength-ductility improvement in as-cast Ca-modified Mg–Mg2Si composites through multi-pass FSP and Cu addition. Journal of Materials Research and Technology, 40, 3007-3024. https://doi.org/10.1016/j.jmrt.2026.01.017

[37] Kishchik, M. S., Mochugovskiy, A. G., Cuda, M., Kishchik, A. A., & Mikhaylovskaya, A. V. (2023). Particle stimulated nucleation effect for Al-Mg-Zr-Sc alloys with Ni addition during multidirectional forging. Metals, 13(8), 1499. https://doi.org/10.3390/met13081499

[38] Yang, P., & Zhao, P. (2023). Void nucleation at dislocation boundaries aided by the synergy of multiple dislocation pile-ups. International Journal of Plasticity, 171, 103779. https://doi.org/10.1016/j.ijplas.2023.103779

[39] Mukherjee, I., & Das, P. (2024). Microstructure evolution during solidification in a low superheat casting process of the Al-Mg2Si composites having excess Si: A phase field study. Materials Today Communications, 40, 109620. https://doi.org/10.1016/j.mtcomm.2024.109620

[40] Wang, Y. Q., Kong, G., Che, C. S., Weng, T. Y., & Sun, Z. W. (2018). Corrosion behavior of Zn-Mg alloys in saturated Ca(OH)2 solution. Corrosion Science, 136, 374-385. https://doi.org/10.1016/j.corsci.2018.03.032

[41] Vida, T. A., Conde, A., Freitas, E. S., Arenas, M. A., Cheung, N., Brito, C., de Damborenea, J., & Garcia, A. (2017). Directionally solidified dilute Zn-Mg alloys: Correlation between microstructure and corrosion properties. Journal of Alloys and Compounds, 723, 536-547. https://doi.org/10.1016/j.jallcom.2017.06.228

[42] Vida, T. A., Freitas, E. S., Cheung, N., Garcia, A., & Osório, W. R. (2017). Electrochemical Corrosion Behavior of as-cast Zn-rich Zn-Mg Alloys in a 0.06M NaCl Solution. International Journal of Electrochemical Science, 12(6), 5264-5283. https://doi.org/10.20964/2017.06.37

[43] Guo, J., He, Z., Zhang, Z., Wang, W., Xu, J., Chen, Z., Liu, T., & Guo, L. (2024). Influence of heat treatment on the microstructure evolution and corrosion performance of biodegradable Zn-Mg alloys. Materials Today Communications, 40, 109976. https://doi.org/10.1016/j.mtcomm.2024.109976

[44] Hesami, L., Taghiabadi, R., Ghoncheh, M. H., Emami, M., & Yazdi, M. S. (2023). Effect of Cu addition on microstructure and corrosion behavior of Al–15Mg2Si composite. Materials Testing, 65(10), 1498-1507. https://doi.org/10.1515/mt-2023-0217

[45] Safary, E., Taghiabadi, R., Ghoncheh, M. H., Emami, M., & Yazdi, M. S. (2024). Effect of solidification cooling rate on corrosion behavior of Al-15Mg2Si composites. Materials Today Communications, 38, 107948. https://doi.org/10.1016/j.mtcomm.2023.107948

[46] Krieg, R., Vimalanandan, A., & Rohwerder, M. (2014). Corrosion of zinc and Zn-Mg alloys with varying microstructures and magnesium contents. Journal of The Electrochemical Society, 161(3), C156. https://doi.org/10.1149/2.103403jes

[47] Ye, L., Huang, H., Sun, C., Zhuo, X., Dong, Q., Liu, H., Ju, J., Xue, F., Bai, J., & Jiang, J. (2022). Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn–Mg binary alloys. Journal of Materials Research and Technology, 16, 1673-1685. https://doi.org/10.1016/j.jmrt.2021.12.101

[48] Şahbaz, M., & Nalkıran, S. (2026). Microstructural refinement and mechanical property enhancement of AZ91 magnesium alloy via room-temperature multi-directional forging. Scientific Reports, 16(1), 9745. https://doi.org/10.1038/s41598-026-42311-7