| تعداد نشریات | 24 |
| تعداد شمارهها | 912 |
| تعداد مقالات | 8,158 |
| تعداد مشاهده مقاله | 15,838,466 |
| تعداد دریافت فایل اصل مقاله | 13,333,503 |
An Alternative Model for Investigating the Kinetics of Deformation-Induced Martensitic Transformation | ||
| Iranian Journal of Materials Forming | ||
| دوره 13، شماره 3، 2026، صفحه 26-33 اصل مقاله (795.98 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2025.55110.1365 | ||
| نویسندگان | ||
| Kimia Saberi Tavakoli؛ Hamed Mirzadeh* | ||
| School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| چکیده | ||
| Many austenitic stainless steels have a metastable austenite phase that transforms into α'-martensite during deformation at room and cryogenic temperatures. Given the significance of the deformation-induced martensitic transformation for strengthening, plasticity, and grain refinement, examining the kinetics of this transformation is an important issue. Accordingly, in the present work, an alternative kinetics model was introduced and verified by considering strain, deformation temperature, chemical composition, and strain rate as the main variables. This model was formulated as fα' / fsat = 1/{1+1/(λε)m}, where fα' and fsat represent the volume fraction of α΄-martensite and its saturation value, respectively; ε is the equivalent strain, m was obtained as approximately 3 for the effect of deformation temperature and strain rate on α'-martensite formation in AISI 304 and AISI 301LN stainless steels, and λ was found to be a reliable metastability parameter. In the proposed model, λ and m can be determined without the need for non-linear regression, which is a clear advantage compared to other models. The proposed model was benchmarked against the well-known Olson-Cohen model, highlighting its advantages and confirming that it can serve as a viable option for future research works on austenitic stainless steels, advanced high-strength steels, and high-entropy alloys. | ||
| کلیدواژهها | ||
| Metastable stainless steels؛ Plastic deformation؛ α' -martensite formation؛ Austenite stability؛ Phase transformation kinetics | ||
| مراجع | ||
|
[1] Mirzaei, M., & Paydar, M. H. (2019). Anisotropy in elastic properties of porous 316L stainless steel due to the shape and regular cell distribution. Iranian Journal of Materials Forming, 6(1), 56–63. https://doi.org/10.22099/ijmf.2019.31703.1117
[2] Muñoz, J. A., Dolgach, E., Tartalini, V., Risso, P., Avalos, M., Bolmaro, R., & Cabrera, J. M. (2023). Microstructural heterogeneity and mechanical properties of a welded joint of an austenitic stainless steel. Metals, 13(2), 245. https://doi.org/10.3390/met13020245
[3] Bagherpour, E., Reihanian, M., Pardis, M., Ebrahimi, R., & Langdon, T. G. (2018). Ten years of severe plastic deformation (SPD) in Iran, part I: Equal-channel angular pressing (ECAP). Iranian Journal of Materials Forming, 5(1), 71–113. https://doi.org/10.22099/IJMF.2018.28756.1101
[4] Li, J., Cheng, W., Qin, W., Chen, M., Zhao, Y., Li, Y., Mao, Q. (2023). Cryogenic impact property of a high-strength-ductility 304L stainless steel with heterogeneous lamella structure. Journal of Materials Research and Technology, 24, 1401–1409. https://doi.org/10.1016/j.jmrt.2023.03.081
[5] Kishore, K., Kumar, R. G., & Chandan, A. K. (2021). Critical assessment of the strain-rate dependent work hardening behaviour of AISI 304 stainless steel. Materials Science and Engineering: A, 803, 140675. https://doi.org/10.1016/j.msea.2020.140675
[6] Jalali, A., Mehranpour, M. S., Kalhor, A., Sohrabi, M. J., Heydarinia, A., Hasnabadi, F., Mirzadeh, H., Malekan, M., Sarkari Khorrami, M., Fallah, V., & Rodak, K. (2025). Superior strength-ductility synergy in metastable high-entropy alloys: the crucial role of FCC to BCC martensitic phase transformation. Journal of Alloys and Compounds, 1044, 184464. https://doi.org/10.1016/j.jallcom.2025.184464
[7] Khorrami, M., Hanzaki, A. Z., Abedi, H. R., Moallemi, M., Mola, J., & Chen, G. (2021). On the effect of Mn-content on the strength-ductility balance in Ni-free high N transformation induced plasticity steels. Materials Science and Engineering: A, 814, 141260. https://doi.org/10.1016/j.msea.2021.141260
[8] Zadeh, S. H., Jafarian, H. R., Park, N., & Eivani, A. R. (2020). Regulating of tensile properties through microstructure engineering in Fe-Ni-C TRIP steel processed by different strain routes of severe deformation. Journal of Materials Research and Technology, 9(3), 2903–2913. https://doi.org/10.1016/j.jmrt.2020.01.041
[9] Eskandari, M., Khosravi, B. I., Alavi, Z. S. R., & Yeganeh, M. (2022). Effect of cold-rolling and annealing treatments on the microstructure and mechanical properties of AISI 309S austenitic stainless steel. Iranian Journal of Materials Forming, 9(3), 52–61. https://doi.org/10.22099/IJMF.2022.43813.1228
[10] Qin, W., Li, J., Liu, Y., Kang, J., Zhu, L., Shu, D., Peng, P., She, D., Meng, D., & Li, Y. (2019). Effects of grain size on tensile property and fracture morphology of 316L stainless steel. Materials Letters, 254, 116–119. https://doi.org/10.1016/j.matlet.2019.07.058
[11] Behjati, P., Kermanpur, A., Najafizadeh, A., Samaei Baghbadorani, H., Karjalainen, L. P., Jung, J. G., & Lee, Y.-K. (2014). Effect of nitrogen content on grain refinement and mechanical properties of a reversion-treated Ni-free 18Cr-12Mn austenitic stainless steel. Metallurgical and Materials Transactions A, 45(13), 6317–6328. https://doi.org/10.1007/s11661-014-2595-4
[12] Hamada, A. S., Kisko, A. P., Sahu, P., & Karjalainen, L. P. (2015). Enhancement of mechanical properties of a TRIP-aided austenitic stainless steel by controlled reversion annealing. Materials Science and Engineering: A, 628, 154–159. https://doi.org/10.1016/j.msea.2015.01.042
[13] Jain, A., & Varshney, A. (2024). A critical review on deformation-induced transformation kinetics of austenitic stainless steels. Materials Science and Technology, 40(2), 75–106. https://doi.org/10.1177/02670836231212618
[14] Olson, G. B., & Cohen, M. (1975). Kinetics of strain-induced martensitic nucleation. Metallurgical transactions A, 6(4), 791–795. https://doi.org/10.1007/BF02672301
[15] Shin, H. C., Ha, T. K., & Chang, Y. W. (2001). Kinetics of deformation induced martensitic transformation in a 304 stainless steel. Scripta Materialia, 45(7), 823–829. https://doi.org/10.1016/S1359-6462(01)01101-0
[16] Ahmedabadi, P. M., Kain, V., & Agrawal, A. (2016). Modelling kinetics of strain-induced martensite transformation during plastic deformation of austenitic stainless steel. Materials & Design, 109, 466–475. https://doi.org/10.1016/j.matdes.2016.07.106
[17] Tavares, S. S. M., Pardal, J. M., Da Silva, M. J. G., Abreu, H. F. G. de, & da Silva, M. R. (2009). Deformation induced martensitic transformation in a 201 modified austenitic stainless steel. Materials Characterization, 60(8), 907–911. https://doi.org/10.1016/j.matchar.2009.02.001
[18] Sohrabi, M. J., Mehranpour, M. S., Heydarinia, A., Kalhor, A., Lee, J. H., Mirzadeh, H., Mahmudi, R., Parsa, M. H., Rodak, K., & Kim, H. S. (2024). Deformation-induced martensitic transformation kinetics in TRIP-assisted steels and high-entropy alloys. Acta Materialia, 280, 120354. https://doi.org/10.1016/j.actamat.2024.120354
[19] Lo, K. H., Shek, C. H., & Lai, J. K. L. (2009). Recent developments in stainless steels. Materials Science and Engineering: R: Reports, 65(4–6), 39–104. https://doi.org/10.1016/j.mser.2009.03.001
[20] Angel, T. (1954). Formation of martensite in austenitic stainless steels effects of deformation, temperature, and composition. J. Iron and Steel Inst, 177, 165–174. https://doi.org/10.1299/kikaia.72.1561
[21] Talonen, J., & Hänninen, H. (2007). Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels. Acta Materialia, 55(18), 6108–6118. https://doi.org/10.1016/j.actamat.2007.07.015
[22] Dan, W. J., Zhang, W. G., Li, S. H., & Lin, Z. Q. (2007). A model for strain-induced martensitic transformation of TRIP steel with strain rate. Computational Materials Science, 40(1), 101–107. https://doi.org/10.1016/j.commatsci.2006.11.006
[23] Talonen, J., Hänninen, H., Nenonen, P., & Pape, G. (2005). Effect of strain rate on the strain-induced γ→ α′-martensite transformation and mechanical properties of austenitic stainless steels. Metallurgical and Materials Transactions A, 36(2), 421–432. https://doi.org/10.1007/s11661-005-0313-y
[24] Iwamoto, T., Tsuta, T., & Tomita, Y. (1998). Investigation on deformation mode dependence of strain-induced martensitic transformation in trip steels and modelling of transformation kinetics. International Journal of Mechanical Sciences, 40(2–3), 173–182. https://doi.org/10.1016/S0020-7403(97)00047-7
[25] Polatidis, E., Haidemenopoulos, G. N., Krizan, D., Aravas, N., Panzner, T., Šmíd, M., Papadioti, I., Casati, N., Van Petegem, S., & Van Swygenhoven, H. (2021). The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics. Materials Science and Engineering: A, 800, 140321. https://doi.org/10.1016/j.msea.2020.140321
[26] Sohrabi, M. J., Mirzadeh, H., Sadeghpour, S., & Mahmudi, R. (2023). Grain size dependent mechanical behavior and TRIP effect in a metastable austenitic stainless steel. International Journal of Plasticity, 160, 103502. https://doi.org/10.1016/j.ijplas.2022.103502
[27] Jung, Y.-S., Lee, Y.-K., Matlock, D. K., & Mataya, M. C. (2011). Effect of grain size on strain-induced martensitic transformation start temperature in an ultrafine grained metastable austenitic steel. Metals and Materials International, 17(4), 553–556. https://doi.org/10.1016/j.scriptamat.2008.02.024
[28] Sohrabi, M. J., Naghizadeh, M., & Mirzadeh, H. (2020). Deformation-induced martensite in austenitic stainless steels: A review. Archives of Civil and Mechanical Engineering, 20(4), 124. https://doi.org/10.1007/s43452-020-00130-1
[29] Porter, D. A., & Easterling, K. E. (2009). Phase transformations in metals and alloys (revised reprint). CRC Press. https://doi.org/10.1201/9781439883570
[30] Murr, L. E., Staudhammer, K. P., & Hecker, S. S. (1982). Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study. Metallurgical Transactions A, 13(4), 627–635. https://doi.org/10.1007/BF02644428
[31] Ferreira, P. J., Vander Sande, J. B., Fortes, M. A., & Kyrolainen, A. (2004). Microstructure development during high-velocity deformation. Metallurgical and Materials Transactions A, 35(10), 3091–3101. https://doi.org/10.1007/s11661-004-0054-3 | ||
|
آمار تعداد مشاهده مقاله: 156 تعداد دریافت فایل اصل مقاله: 126 |
||