| تعداد نشریات | 24 |
| تعداد شمارهها | 912 |
| تعداد مقالات | 8,158 |
| تعداد مشاهده مقاله | 15,837,011 |
| تعداد دریافت فایل اصل مقاله | 13,332,463 |
Optimization of Gel Casting Parameters for High-Strength Fused Silica Green Bodies | ||
| Iranian Journal of Materials Forming | ||
| دوره 13، شماره 2، 2026، صفحه 4-12 اصل مقاله (742.31 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2025.54433.1353 | ||
| نویسندگان | ||
| Mozhgan Afgarazordeh؛ Mohammad Hossein Paydar* | ||
| Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran | ||
| چکیده | ||
| The gel casting of fused silica offers a promising approach for producing complex-shaped advanced ceramic components. Achieving a defect-free process, however, requires precise optimization of slurry formulation and gelation parameters. This study systematically investigates the effects of key processing variables on slurry rheology and green body strength, including dispersant concentration, solid loading, monomer-to-crosslinker (AM:MBAM) ratio, initiator concentration, and degassing time. Results indicate that a dispersant concentration of 0.4 ml per 100 g of powder minimizes viscosity, while a solid loading of 58 wt.% represents the upper limit for maintaining slurry stability. A balanced AM:MBAM ratio is critical to achieving both low viscosity during casting and high mechanical strength after gelation, as excessive crosslinker promotes premature microcracking. Furthermore, an initiator (APS) concentration of 0.5 wt.% and a degassing time of 20 minutes maximize green strength by ensuring complete polymerization and eliminating porosity without causing premature gelation. This study provides a comprehensive set of optimized parameters for reliably producing high-integrity fused silica green bodies via gel casting, forming a critical foundation for subsequent high-quality sintering. | ||
| کلیدواژهها | ||
| Fused silica؛ Gel casting؛ Slurry rheology؛ Green strength؛ Process optimization | ||
| مراجع | ||
|
[1] Walton, J. D. (1970). Radome engineering handbook: design and principles. Marcel Dekker.
[2] Bruckner, R. (1970). Properties and structure of vitreous silica. Journal of Non-Crystalline Solids, 5, 123–175. https://doi.org/10.1016/0022-3093(70)90190-0
[3] Chen, B., Zhang, Z., Zhanj, J., & Jiang, D. (2007). Fabrication and mechanical properties of TCP pieces by gel casting method. Materials Science and Engineering, 22, 1–5. https://doi.org/10.1016/j.msec.2007.04.034
[4] Janney, A., Omatete, O., Nunn, D., & Walls, A. (2004). Gel casting. In M. N. Rahaman (Ed.), The handbook of ceramic engineering. Marcel Dekker.
[5] Dickerson, M., Wurm, P., Schorr, J., Hoffman, W., Wapner, P., & Sandhage, K. H. (2004). Near net-shape, ultra-high melting, recession-resistant ZrC/W-based rocket nozzle liners via the displacive compensation of porosity (DCP) method. Journal of Materials Science, 39, 6005–6015. https://doi.org/10.1023/B:JMSC.0000041697.67626.46
[6] Janney, M. A., Nunn, S. D., Walls, C. A., Omatete, O. O., Ogle, R. B., Kirby, G. H., & McMillan, A. D. (1998). Gel casting, the handbook of ceramic engineering. Marcel Decker, New York.
[7] Biggs, S., & Healy, T. W. (1994). Electrosteric stabilization of colloidal zirconia with low-molecular-weight polyacrylic acid — an atomic force microscopy study. Journal of the Chemical Society, Faraday Transactions, 90, 3415–3421.
[8] Janney, M. A., Omatete, O. O., Walls, C. A., Nunn, S. D., Ogle, R. J., & Westmoreland, G. (1998). Development of low-toxicity gelcasting systems. Journal of the American Ceramic Society, 81(3), 581–591. https://doi.org/10.1111/j.1151-2916.1998.tb02377.x
[9] Ranjith Kumar, V. (2007). Colloidal processing and gel casting of alumina. International Conference on Advanced Materials and Composites, 24–26.
[10] Jia, Y., Kanno, Y., & Xie, Z. (2002). New gel-casting process for alumina ceramics based on gelation of alginate. Journal of the European Ceramic Society, 22, 1911–1916. https://doi.org/10.1016/S0955-2219(01)00513-1
[11] Tari, G. (2003). Gel casting ceramics: A review. American Ceramic Society Bulletin, 82, 43–46.
[12] Varma, H. K., & Sivakumar, R. (1996). Dense hydroxyapatite ceramics through gel casting technique. Materials Letters, 29, 57–61. https://doi.org/10.1016/S0167-577X(96)00121-8
[13] Omatete, O., Janney, A., & Nunn, D. (1997). Gelcasting from laboratory development toward industrial production. Journal of the European Ceramic Society, 17, 407–413. https://doi.org/10.1016/S0955-2219(96)00147-1
[14] Wan, W., Huang, C., Yang, J., Zeng, J., & Qiu, T. (2014). Effect of sintering temperature on the properties of fused silica ceramics prepared by gel casting. Journal of Electronic Materials, 43, 704–706. https://doi.org/10.1007/s11664-014-3112-7
[15] Yichen, H., Zhongjian, W., Jianying, L. (2008). Study on the gel casting of fused silica glass. Journal of Non-Crystalline Solids, 354, 1285–1289. https://doi.org/10.1016/j.jnoncrysol.2007.01.109
[16] Kakanuru, P., & Pochiraju, K. (2022), Simulation of shrinkage during sintering of additively manufactured silica green bodies. Additive Manufacturing, 56, 102908. https://doi.org/10.1016/j.addma.2022.102908
[17] Argani, L.P., Misseroni, D., Piccolroaz, A., Vinco, Z., Capuani, D., & Bigoni, D. (2016). Plastically-driven variation of elastic stiffness in green bodies during powder compaction: Part I. Experiments and elastoplastic coupling. Journal of the European Ceramic Society, 36(9), 2159-2167. https://doi.org/10.1016/j.jeurceramsoc.2016.02.012
[18] F. Liu, F., & Chou, K. (2000). Determining critical ceramic powder volume concentration from viscosity measurements. Ceramics International, 26, 159-164. https://doi.org/10.1016/S0272-8842(99)00035-8
[19] Omatete, O. O., Janney, M. A., & Strehlow, R. A. (1991). Gelcasting—A new ceramic forming process. American Ceramic Society Bulletin, 70(10), 1641–1649.
[20] Potoczek, M., E. Zawadzak, E. (2004). Initiator effect on the gelcasting properties of alumina in a system involving low-toxic monomers. Ceramics International, 30, 793–799. https://doi.org/10.1016/j.ceramint.2003.09.014 | ||
|
آمار تعداد مشاهده مقاله: 100 تعداد دریافت فایل اصل مقاله: 120 |
||