| تعداد نشریات | 24 |
| تعداد شمارهها | 929 |
| تعداد مقالات | 8,346 |
| تعداد مشاهده مقاله | 16,802,822 |
| تعداد دریافت فایل اصل مقاله | 14,117,251 |
Residual Stress Analysis in Milled DIN 1.2344 Die Casting Mold: A Fusion of Numerical Simulation and XRD Experimental Validation | ||
| Iranian Journal of Materials Forming | ||
| دوره 12، شماره 2، 2025، صفحه 42-57 اصل مقاله (1.19 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2025.52296.1322 | ||
| نویسندگان | ||
| Ramezan Ali Mahdavinejad* ؛ Sayyed Mohammadreza Sedehi | ||
| School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| چکیده | ||
| Milling is one of the most widely used processes in the manufacturing of die-casting molds and other industrial molds. A major challenge in this process is the generation of residual stresses on the workpiece surface, which can lead to distortions and compromise the precision and performance of the mold. This study investigates the residual stresses induced by milling DIN 1.2344 steel, utilizing the Taguchi design of experiments (L9 array) and validating the results experimentally through X-ray diffraction (XRD) tests. The study examines the effects of three primary milling parameters, cutting speed, feed rate, and depth of cut, on residual stresses and identifies the optimal conditions for minimizing these stresses. The results indicate that increasing the cutting speed from 50 to 112.5 m/min reduces tensile residual stresses by 22%. Additionally, increasing the feed rate from 10 to 20 mm/s leads to an 18% reduction in residual stresses; however, further increases beyond this threshold lead to stress amplification. Regarding the depth of cut, increasing it from 0.2 to 0.4 mm causes a 15% rise in residual stresses, while a depth of 0.6 mm results in a 10% reduction. Furthermore, the cutting forces Fx and Fz initially increase moderately with cutting speed but decrease at 112.5 m/min, attributed to thermal softening effects. These findings offer valuable insights for optimizing the milling process and improving the quality of machined components in the mold-making industry. | ||
| کلیدواژهها | ||
| Residual stress؛ Milling؛ DIN 1.2344 steel؛ Die-casting mold | ||
| مراجع | ||
|
[1] Yang, J., Liu, B., Zeng, Y., Zhang, Y., Huang, H., & Hong, J. (2024). Data extension-based analysis and application selection of process-composition-properties of die casting aluminum alloy. Engineering Applications of Artificial Intelligence, 133, 108514. https://doi.org/10.1016/j.engappai.2024.108514
[2] Peti, F., & Grama, L. (2011). Analyze of the possible causes of porosity type deffects in aluminium high pressure diecast parts. Acta Marisiensis. Seria Technologica, 8(1), 41.
[3] Klobčar, D., Tušek, J., & Taljat, B. (2007). Thermal fatigue of materials for die-casting tooling. Materials Science and Engineering: A, 472(1–2), 198–207. https://doi.org/10.1016/j.msea.2007.03.025
[4] Dawim, J. P. (2010). Metal cutting: Research advances. Nova Science Publishers.
[5] Fuh, K. H., & Wu, C. (1995). A residual-stress model for the milling of aluminum alloy (2014-T6). Journal of Materials Processing Technology, 51(1–4), 87–105. https://doi.org/10.1016/0924-0136(94)01355-5
[6] Demirpolat, H., Binali, R., Kuntoğlu, M., Salur, E., Makhesana, M. A., Yaghoubi, S., & Usca, Ü. A. (2024). The influences of alloying elements and processing conditions on the machinability of wrought aluminium alloys: A literature review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089241290395
[7] Liang, S., & Su, J. C. (2007). Residual stress modeling in orthogonal machining. CIRP Annals, 56(1), 65–68. https://doi.org/10.1016/j.cirp.2007.05.018
[8] Honarpisheh, M., & Mansouri, H. (2018). Experimental study of residual stress on TIG welding of CK45 sheet by contour method. International Conference on Manufacturing Engineering, Tehran, Iran. https://civilica.com/doc/837818
[9] Mohammadpour, M., Razfar, M. R., & Saffar, R. J. (2010). Numerical investigating the effect of machining parameters on residual stresses in orthogonal cutting. Simulation Modelling Practice and Theory, 18(3), 378–389. https://doi.org/10.1016/j.simpat.2009.12.004
[10] Stenberg, N., & Proudian, J. (2013). Numerical modelling of turning to find residual stresses. Procedia CIRP, 8, 258–264. https://doi.org/10.1016/j.procir.2013.06.099
[11] Kara, M. E., Kuzu, A. T., & Bakkal, M. (2024). Investigation of residual stresses induced by milling of compacted graphite iron by x-ray diffraction technique. Journal of Materials Engineering and Performance, 33(8), 3801–3810. https://doi.org/10.1007/s11665-023-08904-3
[12] Zhou, J., Qi, Q., Liu, Q., Wang, Z., & Ren, J. (2024). Determining residual stress profile induced by end milling from measured thin plate deformation. Thin-Walled Structures, 200, 111862. https://doi.org/10.1016/j.tws.2024.111862
[13] Fergani, O., Barka, N., Chatti, S., & Dogui, A. (2014). Analytical modeling of residual stress and the induced deflection of a milled thin plate. The International Journal of Advanced Manufacturing Technology, 75, 455–463. https://doi.org/10.1007/s00170-014-6146-3
[14] Abidi, Y., Mokas, N., & Kerdoun, D. (2024). Contribution to practical analysis of surface roughness modeling during dry hard turning of cold work tool steel AISI D2. Surface Review and Letters, 31(09), 2450071. https://doi.org/10.1142/s0218625x24500719
[15] Nalbant, M., Gökkaya, H., & Sur, G. (2007). Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials & Design, 28(4), 1379-1385. https://doi.org/10.1016/j.matdes.2006.01.008
[16] Pınar, A. M., Filiz, S., & Ünlü, B. S. (2016). A comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method. The International Journal of Advanced Manufacturing Technology, 83, 1431–1440. https://doi.org/10.1007/s00170-015-7666-1
[17] Zahoor, S., Mufti, N. A., Qureshi, M. Q., Saleem, M. P., & Mughal, M. A. M. (2017). Effect of machine tool’s spindle forced vibrations on surface roughness, dimensional accuracy, and tool wear in vertical milling of AISI P20. The International Journal of Advanced Manufacturing Technology, 89, 3671–3679. https://doi.org/10.1007/s00170-016-9346-1
[18] Timothy, N., Gomez, M., Karandikar, J., Heigel, J., Copenhaver, R., & Schmitz, T. (2021). Propagation of Johnson–Cook flow stress model uncertainty to milling force uncertainty using finite element analysis and time domain simulation. Procedia Manufacturing, 53, 223–235. https://doi.org/10.1016/j.promfg.2021.06.025
[19] Debnath, S., Reddy, M. M., & Yi, Q. S. (2016). Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method. Measurement, 78, 111–119. https://doi.org/10.1016/j.measurement.2015.09.011
[20] Wang, C., Ma, R., Zhao, J., & Zhao, J. (2017). Calculation method and experimental study of Coulomb friction coefficient in sheet metal forming. Journal of Manufacturing Processes, 27, 126–137. https://doi.org/10.1016/j.jmapro.2017.02.016
[21] Nine, H. D. (1982). The applicability of Coulomb’s friction law to drawbeads in sheet metal forming. Journal of Applied Metalworking, 2, 200–210. https://doi.org/10.1007/BF02834038
[22] Masoudi, S., Amini, S., Saeidi, E., & Eslami, H. (2015). Effect of machining-induced residual stress on the distortion of thin-walled parts. The International Journal of Advanced Manufacturing Technology, 76, 597–608. https://doi.org/10.1007/s00170-014-6281-x
[23] Chen, D. C., Jhang, J. J., & Guo, M. W. (2013). Application of Taguchi design method to optimize the electrical discharge machining. Journal of Achievements in Materials and Manufacturing Engineering, 57(2), 76–82.
[24] Juneja, B. L. (2003). Fundamentals of metal cutting and machine tools. New Age International.
| ||
|
آمار تعداد مشاهده مقاله: 430 تعداد دریافت فایل اصل مقاله: 486 |
||