| تعداد نشریات | 24 |
| تعداد شمارهها | 851 |
| تعداد مقالات | 7,575 |
| تعداد مشاهده مقاله | 13,413,699 |
| تعداد دریافت فایل اصل مقاله | 11,580,435 |
Investigation of Post-Buckling, Energy Harvesting, and Relaxation of Shape Memory Auxetic Structure with Thermo-Visco-Hyperelastic Modeling | ||
| Iranian Journal of Materials Forming | ||
| دوره 11، شماره 3، مهر 2024، صفحه 28-39 اصل مقاله (5.27 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2024.51080.1302 | ||
| نویسندگان | ||
| S. Vaziri؛ K. Narooei* | ||
| Department of Materials Science and Engineering, K. N. Toosi University of Technology, Tehran, Iran | ||
| چکیده | ||
| This study investigated the non-linear post-buckling behavior of an auxetic cellular structure under compressive loading, with variations in temperature and strain rate. Simulations were conducted on epoxy shape memory polymer (SMP) incorporating different geometrical imperfections derived from buckling analysis. A hyper-viscoelastic model, coupled with the Williams-Landel-Ferry (WLF) equation, was employed, enabling thermo-hyper-viscoelastic modeling that accounts for temperature dependency. The results demonstrated that the imperfection factor significantly changes the shape transformation, and an imperfection factor of 0.01 was used for subsequent simulations. It was observed that increasing the temperature up to 50 °C increases the critical strain required for pattern transformation, while further temperature increases lead to a decrease in the critical strain. Additionally, increasing the strain rate from 0.01 /s to 1 /s raises the absorbed energy from 0.53 J/cm3 to 1.72 J/cm3 while increasing the temperature reduces the absorbed energy due to the rise in loss modulus. It was also found that, irrespective of strain rate variation, the Poisson’s ratio remains around 0.4 and decreases to negative values as the deformation exceeds the critical strain. | ||
| کلیدواژهها | ||
| Auxetic structure؛ Shape memory polymers؛ Thermo-hyper-viscoelastic؛ Buckling؛ Pattern transformation | ||
| مراجع | ||
|
[1] Critchley, R., Smy, V., Corni, I., Wharton, J. A., Walsh, F. C., Wood, R. J., & Stokes, K. R. (2020). Experimental and computation assessment of thermomechanical effects during auxetic foam fabrication. Scientific Reports, 10(1), 18301. https://doi.org/10.1038/s41598-020-75298-w
[2] Hu, J., He, Y., Lei, J., & Liu, Z. (2013). Novel mechanical behavior of periodic structure with the pattern transformation. Theoretical and Applied Mechanics Letters, 3(5), 054007. https://doi.org/10.1063/2.1305407
[3] He, Y., Guo, S., Liu, Z., & Liew, K. M. (2015). Pattern transformation of thermo-responsive shape memory polymer periodic cellular structures. International Journal of Solids and Structures, 71, 194-205. https://doi.org/10.1016/j.ijsolstr.2015.06.022
[4] Bertoldi, K., Reis, P. M., Willshaw, S., & Mullin, T. (2010). Negative Poisson’s ratio behavior induced by an elastic instability. Advanced Materials, 22(3), 361-366. https://doi.org/10.1002/adma.200901956
[5] Forte, A. E., Melancon, D., Zanati, M., De Giorgi, M., & Bertoldi, K. (2023). Chiral mechanical metamaterials for tunable optical transmittance. Advanced Functional Materials, 33(20), 2214897. https://doi.org/10.1002/adfm.202214897
[6] Duncan, O., Foster, L., Allen, T., & Alderson, A. (2023). Effect of Poisson’s ratio on the indentation of open cell foam. European Journal of Mechanics-A/Solids, 99, 104922.
[7] He, P., Wang, S., Zhang, M., Sang, L., Tong, L., & Hou, W. (2024). Compression performance of 3D-printed thermoplastic auxetic structures. Thin-Walled Structures, 197, 111558. https://doi.org/10.1016/j.tws.2024.111558
[8] Gatt, R., Wood, M. V., Gatt, A., Zarb, F., Formosa, C., Azzopardi, K. M., Casha, A., Agius, T. P., Schembri-Wismayer, P., Attard, L., & Chockalingam, N. (2015). Negative Poisson’s ratios in tendons: An unexpected mechanical response. Acta Biomaterialia, 24, 201-208. https://doi.org/10.1016/j.actbio.2015.06.018
[9] Eghbali, P., Younesian, D., Moayedizadeh, A., & Ranjbar, M. (2020). Study in circular auxetic structures for efficiency enhancement in piezoelectric vibration energy harvesting. Scientific Reports, 10(1), 16338. https://doi.org/10.1038/s41598-020-73425-1
[10] Peng, C., Tran, P., & Mouritz, A. P. (2022). Compression and buckling analysis of 3D printed carbon fibre-reinforced polymer cellular composite structures. Composite Structures, 300, 116167. https://doi.org/10.1016/j.compstruct.2022.116167
[11] Johnson, C. G., Jain, U., Hazel, A. L., Pihler-Puzović, D., & Mullin, T. (2017). On the buckling of an elastic holey column. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473(2207), 20170477. https://doi.org/10.1098/rspa.2017.0477
[12] Bertoldi, K., Boyce, M. C., Deschanel, S., Prange, S., & Mullin, T. (2008). Mechanics of deformation-triggered pattern transformations and superelastic behavior in periodic elastomeric structures. Journal of the Mechanics and Physics of Solids, 56(8), 2642-2668. https://doi.org/10.1016/j.jmps.2008.03.006
[13] Talezadehlari, A., & Rahimi, G. H. (2017). The effect of geometrical imperfection on the axial buckling of unstiffened and stiffened composite cylinders with and without cutout. Modares Mechanical Engineering, 17(7), 245-256. https://doi.org/20.1001.1.10275940.1396.17.7.33.5
[14] Dassault Systèmes. (2012). Abaqus/CAE user's manual (Version 6.12). Dassault Systèmes.
[15] Tafreshi, A., & Bailey, C. G. (2007). Instability of imperfect composite cylindrical shells under combined loading. Composite Structures, 80(1), 49-64. https://doi.org/10.1016/j.compstruct.2006.02.031
[16] Su, P., Yang, Y., & Song, Y. (2015). Corneal hyper-viscoelastic model: derivations, experiments, and simulations. Acta of Bioengineering and Biomechanics, 17(2), 73-84. https://doi.org/10.5277/ABB-00142-2014-03
[17] Li, C., & Lua, J. (2009). A hyper-viscoelastic constitutive model for polyurea. Materials Letters, 63(11), 877-880. https://doi.org/10.1016/j.matlet.2009.01.055
[18] Narooei, K., & Arman, M. (2018). Generalization of exponential based hyperelastic to hyper-viscoelastic model for investigation of mechanical behavior of rate dependent materials. Journal of the Mechanical Behavior of Biomedical Materials, 79, 104-113. https://doi.org/10.1016/j.jmbbm.2017.12.019
[19] Janbaz, S., Narooei, K., Van Manen, T., & Zadpoor, A. (2020). Strain rate–dependent mechanical metamaterials. Science Advances, 6(25), eaba0616. https://doi.org/10.1126/sciadv.aba0616
[20] Diani, J., Gilormini, P., Frédy, C., & Rousseau, I. (2012). Predicting thermal shape memory of crosslinked polymer networks from linear viscoelasticity. International Journal of Solids and Structures, 49(5), 793-799. https://doi.org/10.1016/j.ijsolstr.2011.11.019
[21] Hu, J., Zhou, Y., Liu, Z., & Ng, T. Y. (2017). Pattern switching in soft cellular structures and hydrogel-elastomer composite materials under compression. Polymers, 9(6), 229. https://doi.org/10.3390/polym9060229
[22] Taylor, M., Francesconi, L., Baldi, A., Liang, X., & Aymerich, F. (2019). A novel auxetic structure with enhanced impact performance by means of periodic tessellation with variable Poisson’s ratio. In Dynamic Behavior of Materials, Volume 1: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics (pp. 211-218). Springer International Publishing.
[23] Liang, X. (2018). Design of metamaterials with graduating Poisson’s ratio through periodic void patterns [Master's Theses, Santa Clara University]. https://scholarcommons.scu.edu/mech_mstr/20
[24] Javid, F., Liu, J., Shim, J., Weaver, J. C., Shanian, A., & Bertoldi, K. (2016). Mechanics of instability-induced pattern transformations in elastomeric porous cylinders. Journal of the Mechanics and Physics of Solids, 96, 1-17. https://doi.org/10.1016/j.jmps.2016.06.015
[25] Overvelde, J. T. B., Shan, S., & Bertoldi, K. (2012). Compaction through buckling in 2D periodic, soft and porous structures: effect of pore shape. Advanced Materials, 24(17), 2337-2342. https://doi.org/10.1002/adma.201104395
[26] Box, F., Johnson, C. G., & Pihler-Puzović, D. (2020). Hard auxetic metamaterials. Extreme Mechanics Letters, 40, 100980. https://doi.org/10.1016/j.eml.2020.100980
[27] Pence, T. J., & Gou, K. (2015). On compressible versions of the incompressible neo-Hookean material. Mathematics and Mechanics of Solids, 20(2), 157-182. https://doi.org/10.1177/1081286514544258
[28] Ghorbanoghli, A., & Narooei, K. (2019). A new hyper-viscoelastic model for investigating rate dependent mechanical behavior of dual cross link self-healing hydrogel. International Journal of Mechanical Sciences, 159, 278-286. https://doi.org/10.1016/j.ijmecsci.2019.06.019
[29] Hiemenz, P. C., Lodge, T. P. (2007). Polymer chemistry. CRC press.
[30] Sadeghi, F., Baniassadi, M., Shahidi, A., Baghani, M. (2023). TPMS metamaterial structures based on shape memory polymers: Mechanical, thermal and thermomechanical assessment. Journal of Materials Research and Technology, 23, 3726-3743. https://doi.org/10.1016/j.jmrt.2023.02.014 | ||
|
آمار تعداد مشاهده مقاله: 138 تعداد دریافت فایل اصل مقاله: 172 |
||