| تعداد نشریات | 24 |
| تعداد شمارهها | 851 |
| تعداد مقالات | 7,575 |
| تعداد مشاهده مقاله | 13,413,795 |
| تعداد دریافت فایل اصل مقاله | 11,580,476 |
Reliability analysis of a mounted moldboard plow structure using the Monte Carlo simulation method | ||
| Iran Agricultural Research | ||
| مقاله 7، دوره 42، شماره 1، شهریور 2023، صفحه 63-75 اصل مقاله (552.47 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/iar.2023.44775.1508 | ||
| نویسندگان | ||
| Seyed Mohammad Reza Nazemosadat* 1؛ Davoud Ghanbarian2؛ Mohammad Amin Nematollahi3 | ||
| 1Department of Mechanical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, I. R. Iran | ||
| 2Department of Industrial Design, Faculty of Applied Arts, University of Art, Tehran, I. R. Iran | ||
| 3Department of Biosystems Engineering, School of Agriculture, Shiraz University, Shiraz, I. R. Iran | ||
| چکیده | ||
| Applying the reliability concept as a new and profitable design approach can optimize the design and manufacturing of tillage machines. In this study, the Monte Carlo method was used to perform reliability analysis on the whole chassis of a moldboard plow. For this, a complete model of a three-bottom moldboard plow was assumed as the limit mode function. Stochastic soil parameters were applied and the interaction forces of the plow with soil were simulated with finite element method (FEM). The desired output was the soil reaction forces on the plow at the most critical plowing speed and depth. Then, by applying the forces obtained from the FEM model and considering Young’s modulus of the chassis as a random variable, chassis static analysis was performed in different iterations and the stress concentration at different locations was determined. The probability of failure (Pf) and reliability index (β) of different locations of chassis were calculated. The results of the Monte Carlo simulation showed that the highest Pf occurred in crossbars, standards, braces and, masts with the values of 1, 0.296, 0.165 and, 0.033, respectively, which indicates the uncertainty of the design in these parts and the needs to strengthen or optimize the aforementioned parts of the moldboard plow chassis. | ||
| کلیدواژهها | ||
| Chassis؛ Finite element method؛ Moldboard plow؛ The Monte Carlo simulation؛ Reliability | ||
| مراجع | ||
|
Abo Al-kheer, A., El-Hami. A., Kharmanda, M. G., & Mouazen, A. M. (2011). Reliability-based design for soil tillage machines. Journal of Terramechanics, 48(1), 57–64. https://doi.org/10.1016/j.jterra.2010.06.001. Ditlevsen, O., & Madsen, H. O. (2005). Structural reliability methods. Internet edition. 2.2.5. First edition published by John Wiley & Sons, Chichester, 1996. https://www.ukm.my/kamal3/rro/note%20Structural%20Reliability%20Methods.pdf Godwin, R. J., O’Dogherty, M. J., Saunders, C., & Balafoutis, A. T. (2007). A force prediction model for moldboard plows incorporating the effects of soil characteristic properties, plow geometric factors and plowing speed. Biosystems Engineering, 97(1), 117-129. https://doi.org/10.1016/j.biosystemseng.2007.02.001 Hadianfard, M. A., Malekpour, S., & Momeni, M. (2018). Reliability analysis of H-section steel columns under blast loading. Journal of Structural Safety, 75, 45–56. https://doi.org/10.1016/j.strusafe.2018.06.001. Jiang, S., Du, C., & Hong, Y. (2013). Failure analysis of a cracked concrete gravity dam under earthquake. Engineering Failure Analysis, 33, 265-280. https:// doi: 10.1016/j.engfailanal .2013.05.024 Kartal, M. E., Başağa, H. B. & Bayraktar A. (2011). Probabilistic nonlinear analysis of CFR dams by MCS using Response Surface Method. Applied Mathematical Modelling, 35(6), 2752-2770. https://doi: 10.1016/j.apm. 2010.12.003. Kharmnda, G., Ibrahim, M. H., Abo Al-Kheer, A., Guerin, F., & El-Hami, A. (2014). Reliability-based design optimization of shank chisel plow using optimum safety factor strategy. Computers and Electronics in Agriculture, 109, 162-171. https://doi: org/10.1016/j.compag.2014.09.001. McKyes, E & Ali, O. S. (1977). The cutting of soil by narrow blades. Journal of Terramechanics, 14, 43-58. https://doi.org/10.1016/0022-4898(77)90001-5 Metropolis, N., & Ulam, S. (1949). The Monte Carlo Method. Journal of American Statistical Association, 44, 335-41. https://doi: 10.1080/01621459.1949. 10483310. Melchers, R. E. (2018). Structural reliability analysis and prediction. Chichester: John Wiley & Sons. doi:10.1002/978111926610 Mojahed, M. M., & Ahmadi Nedushan, B. (2013). Reliability analysis of steel frames based on advanced methods of Monte Carlo. 7th National Congress of Civil Engineering. Shahid Nikbakht Faculty of Engineering. 17 and 18 May. Sistan and Baluchestan University. Zahedan.) In Persian). Nazemosadat, S. M. R., Ghanbarian, D., Naderi-Boldaji, M., & Nematollahi, M. A. (2022a). Structural analysis of a mounted moldboard plow using finite element simulation method. Spanish Journal of Agricultural Research. 20(2), 1-14. https://doi.org/10.5424/sjar/2022202-18157. Nazemosadat, S. M. R., Naderi-Boldaji, M., Ghanbarian, D., & Nematollahi, M. A. (2022b). Reliability analysis of a mounted moldboard plow bottom standard using the FORM method. Journal of Optimization in Industrial Engineering. 15(2), 170-190. https://doi.org/10.22094/joie.2022.1932748.1868. Nowak, A. S., & Collins, K. R. (2012). Reliability of Structures. Second Edition. CRC Press. https://www.routledge.com/Reliability-of-Structures/Nowak-Collins/p/book/9780429107467 Shayanfar, M., Ghanooni Bagha, M., & Jahani, E. (2015). Reliability theory of structures. Iran: Tehran, University of Science and Technology Publications. )In Persian). Sorensen, J. D. (2004). Structural reliability theory and risk analysis. Denmark: Aalborg, Institute of Building Technology and Structural Engineering Aalborg University. Zhang, S., Wang, G., Wang, C., Pang, B., & Du, C. (2014). Numerical simulation of failure modes of concrete gravity dams subjected to underwater explosion. Engineering Failure Analysis, 36, 49-64. | ||
|
آمار تعداد مشاهده مقاله: 297 تعداد دریافت فایل اصل مقاله: 461 |
||