| تعداد نشریات | 24 |
| تعداد شمارهها | 903 |
| تعداد مقالات | 8,081 |
| تعداد مشاهده مقاله | 15,203,527 |
| تعداد دریافت فایل اصل مقاله | 12,847,876 |
The Simulation of Texture of Al0.3CoCrFeNi High Entropy Alloy after Cold Deformation using Visco-Plastic Self-Consistent Model | ||
| Iranian Journal of Materials Forming | ||
| مقاله 5، دوره 10، شماره 1، فروردین 2023، صفحه 53-60 اصل مقاله (1.23 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2023.46966.1253 | ||
| نویسندگان | ||
| A.H. Hosseinifar* ؛ K. Dehghani | ||
| Department of Materials and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran | ||
| چکیده | ||
| In the present study, a visco-plastic self-consistent model (VPSC) was used to predict the Al0.3CoCrFeNi texture after cold rolling. The alloy under examination was produced via vacuum arc remelting and casting (VAR casting). Then, it was remelted four times to have the best structure homogeneity. However, the produced ingot was then homogenized at 1050°C for 10 h to remove the residual stress and reduce the micro-macro-segregation. This was followed by 75% cold reduction which was employed in seven passes. In order to simulate the Al0.3CoCrFeNi texture via the VPSC model, affine schemes and hardening parameters were used in this model. Moreover, this model was performed by Fortran 77 programming languages, and grain fragmentation and co-rotational effect were used in this code. In this study, a simulation process was used for 300 and 1000 grains. After that, simulation results were compared with experimental textures that were measured by the X-ray diffraction method. The results showed that both experimental and simulated textures have an acceptable compatibility. However, there are differences between the measured and simulated results, which can be attributed to the number of grains of estimated and simulated cases. | ||
| کلیدواژهها | ||
| Crystal plasticity؛ Cold rolling؛ High entropy alloys؛ Texture | ||
| مراجع | ||
|
[1] J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Nanostructured high entropy alloys with multiple principal elements: novel alloy design concepts and outcomes, Advanced Engineering Materials, 6(5) (2004) 299-303.
[2] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Microstructures and properties of high-entropy alloys, Progress in Materials Science, 61 (2014) 1-93.
[3] A.J. Zaddach, R.O. Scattergood, C.C. Koch, Tensile properties of low-stacking fault energy high-entropy alloys, Materials Science and Engineering: A, 636 (2015) 373-378.
[4] D. Li, C. Li, T. Feng, Y. Zhang, G. Sha, J.J. Lewandowski, P.K. Liaw, Y. Zhang, High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures, Acta Materialia, 123 (2017) 285-294.
[5] F. Roters, P. Eisenlohr, T.R. Bieler, D. Raabe, Crystal plasticity finite element methods: in Materials science and engineering, John Wiley & Sons, Weinheim, 2011.
[6] K.D. Liss, A. Bartels, A. Schreyer, High-energy X-rays: a tool for advanced bulk investigations in materials science and physics, Textures and Microstructures, 35(3-4) (2003) 219-252.
[7] H.R. Wenk, P. Van Houtte, Texture and anisotropy, Reports on Progress in Physics, 67(8) (2004) 1367.
[8] H. Hu, Texture of metals, Texture, 1 (1974) 233-258.
[9] G.I. Taylor, Plastic strain in metals, Journal of the Institute of Metals, 62 (1938) 307-324.
[10] R.A. Lebensohn and C.N. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys, Acta Metallurgica et Materialia, 41(9) (1993) 2611-2624.
[11] A. Despres, M. Zecevic, R.A. Lebenson, J.D. Mithieux, Contribution of intragranular misorientation to the cold rolling textures of ferritic stainless steels, Acta Materialia, 182 (2020) 184-196.
[12] A.J. Zaddach, C. Niu, C.C. Koch, D.L. Irving, Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy, JOM, 65 (2013) 1780-1789.
[13] N. Kumar, Q. Ying, X. Nie, R.S. Mishra, Z. Tang, P.K. Liaw, R.E. Brennan, K.J. Doherty, K.C. Cho, High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy, Materials & Design, 86 (2015) 598-602.
[14] M. Annasamy, N. Haghdadi, A. Taylor, P. Hodgson, D. Fabijanic, Static recrystallization and grain growth behavior of Al0.3CoCrFeNi high entropy alloy, Materials Science and Engineering: A, 754 (2019) 282-294.
[15] V.V. Mishin, I.A. Shishov, O.N. Stolyarov, I.A. Kasatkin, Effect of cold rolling route on deformation mechanism and texture evolution of thin beryllium foils: exprement and VPSC simulation, Materials Characterization, 164 (2020) 110350.
[16] R.A. Lebensohn, C. Tomé, A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals, Materials Science and Engineering: A, 175(1-2) (1994) 71-82.
[17] C. Zhang, F. Zhang, S. Chen, W. Cao, Computational thermodynamics aided high-entropy alloy design, JOM, 64 (2012) 839-845.
[18] R.A. Lebensohn, C.N. Tomé, P.J. Maudlin, A selfconsistent formulation for the prediction of the anisotropic behavior of viscoplastic polycrystals with voids, Journal of the Mechanics and Physics of Solids, 52(2) (2004) 249-278.
[19] J.W. Hutchinson, Bounds and self-consistent estimates for creep of polycrystalline materials, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 348 (1976) 101–127.
[20] R. Masson, M. Bornert, P. Suquet, A. Zaoui, An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals, Journal of the Mechanics and Physics of Solids, 48(6-7) (2000) 1203-1227.
[21] C.N. Tomé, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner, Mechanical response of zirconium—I. Derivation of a polycrystal constitutive law and finite element analysis, Acta Materialia, 49(15) (2001) 3085-3096.
[22] S. Gangireddy, B. Gwalani, K. Liu, R. Banerjee, R.S. Mishra, Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy, Journal of Materials Science and Engineering: A, 734 (2018) 42-50.
[23] M.A. Iadicola, L. Hu, A.D. Rollett, T. Foecke, Crystal plasticity analysis of constitutive behavior of 5754 aluminum sheet deformed along bi-linear strain paths, International Journal of Solids and Structures, 49(25) (2012) 3507-3516.
[24] S.F. Chen, H.W. Song, S.H. Zhang, M. Cheng, C. Zheng, M.G. Lee, An effective Schmid factor in consideration of combined normal and shear stress for slip/twin variant selection of Mg-3Al-1Zn alloy, Scripta Materialia, 167 (2019) 51-55.
[25] A. Chapuis, Z.Q. Wang, Q. Liu, Influence of material parameters on modeling plastic deformation of Mg alloys, Materials Science and Engineering: A, 655 (2016) 244-250.
[26] J. Galán-López, P. Verleysen, Simulation of the plastic response of Ti–6Al–4V thin sheet under different loading conditions using the viscoplastic self-consistent model, Materials Science and Engineering: A, 712 (2018) 1-11.
[27] H. Pan, F. Wang, M. Feng, L. Jin, J. Dong, P. Wu, Mechanical behavior and microstructural evolution in rolled Mg-3Al-1Zn-0.5Mn alloy under large strain simpleshear, Materials Science and Engineering: A, 712 (2018) 585-591.
[28] Q. Jiao, G.D. Sim, M. Komarasamy, R.S. Mishra, P.K. Liaw, J.A. El-Awady, Thermo-mechanical response of single-phase face centered cubic AlxCoCrFeNi high entropy alloy microcrystals, Materials Research Letters, 6(5) (2018) 300-306.
[29] J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Nanostructured high entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes, Advanced Engineering Materials, 6(5) (2004) 299-303.
[30] J.W. Yeh, S.J. Lin, T.S. Chin, J.Y. Gan, S.K. Chen, T.T. Shun, C.H. Tsau, S.Y. Chou, Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements, Metallurgical and Materials Transactions A, 35 (2004), 2533-2536.
[31] Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, P.K. Liaw, Solid-solution phase formation rules for component alloys, Advanced Engineering Materials, 10(6) (2008) 534-538.
[32] Y.J. Zhou, Y. Zhang, F.J. Wang, G.L. Chen, Phase transformation induced by lattice distortion in multiprincipal component Co Cr Fe Ni Cux Al1-x solid-solution alloys, Applied Physics Letters, 92(24) (2008) 241917.
[33] A. Khajezadeh, M. Habibi Parsa, H. Mirzadeh, Crystal plasticity analysis of texture evolution of pure aluminum during processing by a new severe plastic deformation technique, Metallurgical and Materials Transactions A, 47 (2016) 941-948. | ||
|
آمار تعداد مشاهده مقاله: 415 تعداد دریافت فایل اصل مقاله: 409 |
||