Experimental evaluation of a fluted feed roller metering device performance in a pneumatic grain drill for rapeseed planting

Ahmad, F., Adeel, M., Qui, B., Ma, J., Shoaib, M., Shakoor, A., & Chandio, F. A. (2021). Sowing uniformity of bed-type pneumatic maize planter at various seedbed preparation levels and machine travel speeds. International Journal of Agricultural and Biological Engineering, 14(1), 165-171.

Ahmadi, E., Jaberi Moez, M., & Ahmadvan, G. (2008). Evaluation of various planters on seed rate, emergence, sowing depth and seed distribution uniformity of canola, presented at 5^th Conference on agricultural machinery engineering and mechanization, Mashhad University. Mashhad. (In Persian)

Al-Hamed, S. A., Wahby, M. F., Aboukarima, A. M. & Tabash, I. S. (2015). Evaluating a laboratory test-rig for calibration of a grain drill for education purpose. ARPN Journal of Agricultural and Biological Science, 10 (12), 469-475.

Amirian, A., Rezaei Asl, A., & Esmailzadeh, E. (2017). Fabrication and evaluation of pressurized metering drum performance (equipped with a mechanical separator) by grease belt. Iranian Journal of Biosystems Engineering, 48(3), 271-278. (In Persian)

An, X., Wang, S., Duan, H., Yang, C., & Yu, Y. (2017). Test on effect of the operating speed of maize-soybean interplanting seeders on performance of seeder-metering devices. Procedia Engineering, 174, 353-359.

Behroozi Lar, M. (2016). Mechanization, energy and satellite agriculture: The history of agricultural mechanization in the world and Iran. Tehran, Iran: Agricultural education research. (In Persian)

Ding, Y., Yang, L., Zhang, D., Cui, T., Li, Y., Zhong, X., ... & Ding, Z. (2021). Novel low-cost control system for large high-speed corn precision planters. International Journal of Agricultural and Biological Engineering, 14(2), 151-158.

Emrah, K. U. Ş., & Yildirim, Y. (2022). Evaluation of the seed flow uniformity of the fluted feed roller designed for coarse-grained seeds. Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi, 25(3), 550-555.

DOI: 10.18016/ksutarimdoga.vi.883208

Gautam, P. V., Kushwaha, H. L., Kumar, A., & Kushwaha, D. K. (2019). Mechatronics application in precision sowing: A review. International Journal of Current Microbiology and Applied Sciences, 8(4), 1793-1807.

Gierz, Ł., & Markowski, P. (2020). The Effect of the distribution head tilt and diffuser variants on the evenness of sowing rye and oat seeds with a pneumatic seed drill. Materials, 13(13), 3000.

DOI:10.3390/ma13133000

Guler, I. E. (2005). Effects of flute diameter, fluted roll length, and speed on alfalfa seed flow. Applied Engineering in Agriculture, 21(1), 5-7.

Hu, H., Zhou, Z., Wu, W., Yang, W., Li, T., Chang, C., ... & Lei, X. (2021). Distribution characteristics and parameter optimisation of an air-assisted centralised seed-metering device for rapeseed using a CFD-DEM coupled simulation. Biosystems Engineering, 208, 246-259.

Huang, Y., Wang, B., Yao, Y., Ding, S., Zhang, J., & Zhu, R. (2018). Parameter optimization of fluted-roller meter using discrete element method. International Journal of Agricultural and Biological Engineering, 11(6), 65-72.

Iacomi, C., & Popescu, O. (2015). A new concept for seed precision planting. Agriculture and Agricultural Science Procedia, 6, 38-43.

Jafari, M., Hemmat, A., & Sadeghi, M. (2011). Comparison of coefficient of variation with non-uniformity coefficient in evaluation of grain drills. Journal of Agricultural Science and Technology, 13, 643-654.

Kara, M., Bayhan, A. K., Ozsert, I., & Yildirim, Y. (2010). Performance of fluted roll metering devices in seed drills with ammonium sulphate and diammonium phosphate. Applied Engineering in Agriculture, 26(2), 197-201.

Lei, X., Hu, H., Wu, W., Liu, H., Liu, L., Yang, W., ... & Ren, W. (2021). Seed motion characteristics and seeding performance of a centralised seed metering system for rapeseed investigated by DEM simulation and bench testing. Biosystems Engineering, 203, 22-33.

Lei, X., Liao, Y., Zhang, Q., Wang, L., & Liao, Q. (2018). Numerical simulation of seed motion characteristics of distribution head for rapeseed and wheat. Computers and Electronics in Agriculture, 150, 98-109.

Li, B., Ahmad, R., Qi, X., Li, H., Nyambura, S. M., Wang, J., ... & Li, S. (2021). Design evaluation and performance analysis of a double-row pneumatic precision metering device for brassica chinensis. Sustainability, 13(3), 1374.

DOI:10.3390/su13031374

Maleki, M. R., Jafari, J. F., Raufat, M. H., Mouazen, A. M., & De Baerdemaeker, J. (2006). Evaluation of seed distribution uniformity of a multi-flight auger as a grain drill metering device. Biosystems Engineering, 94(4), 535-543.

Mohammad-Ghasemnejad Maleki, H. (2019). Filed evaluation of mechanized cultivation planters of rapeseed in Shoushtar region. Journal of Plant Production Sciences, 8(2), 183-196. (In Persian)

Minfeng, J., Yongqian, D., Hongfeng, Y., Haitao, L., Yizhuo, J., & Xiuqing, F. (2018). Optimal structure design and performance tests of seed metering device with fluted rollers for precision wheat seeding machine. IFAC-PapersOnLine, 51(17), 509-514.

Murray, J. R., Tullberg, J. N., & Basnet, B. B. (2006). Planters and their components: Types, attributes, functional requirements, classification and description. Australia: ACIAR.

Owen, M. D., Beckie, H. J., Leeson, J. Y., Norsworthy, J. K., & Steckel, L. E. (2015). Integrated pest management and weed management in the United States and Canada. Pest Management Science, 71(3), 357-376.

Ozturk, I., Yildirim, Y., Hinislioglu, S., Demir, B., & Kus, E. (2012). Optimization of seed flow evenness of fluted rolls used in seed drills by Taguchi method. Scientific Research and Essays, 7(1), 78-85.

Rebati, J., & Zareian, S. (2003). Design construction and laboratory evaluation of a roller type metering device for hill dropping. Journal of Agricultural Science, 13(4), 75-86.

Wang, C., Li, H., He, J., Wang, Q., Lu, C., & Yang, H. (2022). Optimization design of a pneumatic wheat-shooting device based on numerical simulation and field test in rice–wheat rotation areas.  Agriculture, 12(1), 1-13.

Wu, W., Chang, C., Li, T., Hu, H., Zhou, Z., Yang, W., ... & Lei, X. (2022). Seed-filling characteristics of a centralized seed-metering device for rapeseed caused by vibration. Agriculture, 12(7), 965.

https://doi.org/10.3390/agriculture12070965

Xi, X., Gao, W., Gu, C., Shi, Y., Han, L., Zhang, Y., ... & Zhang, R. (2021). Optimisation of no-tube seeding and its application in rice planting. Biosystems Engineering, 210, 115-128.

Xi, X., Gu, C., Shi, Y., Zhao, Y., Zhang, Y., Zhang, Q., ... & Zhang, R. (2020). Design and experiment of no-tube seeder for wheat sowing. Soil and Tillage Research, 204, 104724.

https://doi.org/10.1016/j.still.2020.104724

Xiong, D., Wu, M., Xie, W., Liu, R., & Luo, H. (2021). Design and experimental study of the general mechanical pneumatic combined seed metering device.  Applied Sciences, 11(16), 7223.

Yasir, S. H., Liao, Q., Yu, J., & He, D. (2012). Design and test of a pneumatic precision metering device for wheat. Agricultural Engineering International: CIGR Journal, 14(1), 16-25.

Yatskul, A., Lemiere, J. P., & Cointault, F. (2017). Influence of the divider head functioning conditions and geometry on the seed's distribution accuracy of the air-seeder. Biosystems Engineering, 161, 120-134.

Yitao, L., Lei, W., & Qingxi, L. (2017). Design and test of an inside-filling pneumatic precision centralized seed-metering device for rapeseed. International Journal of Agricultural and Biological Engineering, 10(2), 56-62.