| تعداد نشریات | 24 |
| تعداد شمارهها | 934 |
| تعداد مقالات | 8,383 |
| تعداد مشاهده مقاله | 16,981,303 |
| تعداد دریافت فایل اصل مقاله | 14,371,047 |
A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM) | ||
| Iranian Journal of Materials Forming | ||
| دوره 9، شماره 2، تیر 2022، صفحه 58-69 اصل مقاله (3.4 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2022.42996.1216 | ||
| نویسندگان | ||
| E. Katoueizadeh1؛ M. Ebadi2؛ S.M. Zebarjad* 1؛ K. Janghorban1 | ||
| 1Department of Materials Science and Engineering, Engineering Faculty, Shiraz University, Shiraz, Iran | ||
| 2Department of Civil Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran | ||
| چکیده | ||
| In recent years, many new material configurations have emerged from which hybrid materials such as microcomposites have shown promising applications. In the current study, the microencapsulated-based epoxy composites were simulated in micro and macro-scales using numerical modeling. A single-microcapsule was simulated by finite element method (FEM) to estimate the effect of compression on a representative equivalent volume (REV). FEM sensitivity analysis was conducted for different conditions of encapsulation efficiency, i.e., full, half-full and empty, varied diameter (50, 100, 200 μm) and thickness (2, 6, 10 μm) of capsules to study the influence of each governing parameter on the load-deformation behavior of the composite. The composites containing microcapsules with full content showed an improvement in the elastic modulus in comparison with the neat epoxy, while half-full and empty composites exhibited lower elastic moduli. Moreover, the results showed that the diameter of the capsules significantly influences the stiffness of the composite. Indeed, the overall elastic modulus of the 50 μm microcapsules was slightly affected by the encapsulation efficiency while the 200 μm microcapsules showed a drop of 28% in their elastic modulus from the full to the empty capsule condition. Finally, the load-deformation behavior of the composite was studied in macro-scale based on the elastic moduli calculated from micro-scale modeling of an REV. | ||
| کلیدواژهها | ||
| Microcapsule؛ Composite؛ Epoxy؛ Urea formaldehyde؛ Finite element method | ||
| مراجع | ||
|
[1] A. Behera, Self-Healing Materials, In Advanced materials, Springer, 2022, pp. 321-358.
[2] N.J. Kanu, E. Gupta, U.K. Vates, G.K. Singh, Self-healing composites: A state-of-the-art review, Composites Part A: Applied Science and Manufacturing, 121 (2019) 474-486.
[3] T. Speck, G. Bold, T. Masselter, S. Poppinga, S. Schmier, M. Thielen, O. Speck, Biomechanics and functional morphology of plants-Inspiration for biomimetic materials and structures, In Plant biomechanics, Springer, 2018, pp. 399-433.
[4] K.A. Althaqafi, J. Satterthwaite, N. Silikas, A review and current state of autonomic self-healing microcapsules-based dental resin composites, Dental Materials, 36(3) (2020) 329-342.
[5] S.N. Gan, N. Shahabudin, Applications of microcapsules in self-healing polymeric materials, Microencapsulation-Processes, Technologies and Industrial Applications, (2019).
[6] J. Ren, X. Wang, D. Li, N. Han, B. Dong, F. Xing, Temperature adaptive microcapsules for self-healing cementitious materials, Composites Part B: Engineering, 223 (2021) 109138.
[7] Y. Tian, M. Zheng, P. Li, J. Zhang, R. Qiao, C. Cheng, H. Xu, Preparation and characterization of self-healing microcapsules of asphalt, Construction and Building Materials, 263 (2020) 120174.
[8] M. Mobaraki, M. Ghaffari, M. Mozafari, Basics of self-healing composite materials, In Self-healing composite materials, Woodhead Publishing Elsevier, 2020, 15-31.
[9] M.D. Hager, P. Greil, C. Leyens, S. van der Zwaag, U.S. Schubert, Self‐healing materials, Advanced Materials, 22(47) (2010) 5424-5430.
[10] J.A. Syrett, C.R. Becer, D.M. Haddleton, Self-healing and self-mendable polymers, Polymer Chemistry, 1(7) (2010) 978-987.
[11] M. Samadzadeh, S.H. Boura, M. Peikari, S. Kasiriha, A. Ashrafi, A review on self-healing coatings based on micro/nanocapsules, Progress in Organic Coatings, 68(3) (2010) 159-164.
[12] P.T. Silva, L.L.M. Fries, C.R. Menezes, A.T. Holkem, C.L. Schwan, É.F. Wigmann, J.D.O. Bastos, C.D.B. Silva, Microencapsulation: concepts, mechanisms, methods and some applications in food technology, Ciência Rural, 44(7) (2014) 1304-1311.
[13] E.J. Barbero, K.J. Ford, J.A. Mayugo, Modeling self-healing of fiber-reinforced polymer-matrix composites with distributed damage, Self-healing Materials, Wiley, 2009.
[14] J.D. Rule, N.R. Sottos, S.R. White, Effect of microcapsule size on the performance of self-healing polymers, Polymer, 48(12) (2007) 3520-3529.
[15] S. Zwaag, Routes and mechanisms towards self healing behaviour in engineering materials, Technical Sciences, 58(2) (2010) 227-236.
[16] M.M. Shokrieh, H. Rajabpour-Shirazi, M. Heidari-Rarani, M. Haghpanahi, Simulation of mode I delamination propagation in multidirectional composites with R-curve effects using VCCT method, Computational Materials Science, 65 (2012) 66-73.
[17] S.D. Mookhoek, H.R. Fischer, S. van der Zwaag, A numerical study into the effects of elongated capsules on the healing efficiency of liquid-based systems, Computational Materials Science, 47(2) (2009) 506-511.
[18] F.A. Gilabert, D. Garoz, W. Van Paepegem, Macro-and micro-modeling of crack propagation in encapsulation-based self-healing materials: Application of XFEM and cohesive surface techniques, Materials & Design, 130 (2017) 459-478.
[19] E. Katoueizadeh, S.M. Zebarjad, K. Janghorban, A practical analytic model for predicting the performance of an encapsulated polymer composite, Applied Mathematical Modelling, 78 (2020) 418-432.
[20] Z. Lv, H. Chen, Analytical models for determining the dosage of capsules embedded in self-healing materials, Computational Materials Science, 68 (2013) 81-89.
[21] S.V. Zemskov, H.M. Jonkers, F.J. Vermolen, Two analytical models for the probability characteristics of a crack hitting encapsulated particles: Application to self-healing materials, Computational Materials Science, 50(12) (2011) 3323-3333.
[22] H.A. Algaifi, S.A. Bakar, A.R.M. Sam, A.R.Z. Abidin, S. Shahir, W.A.H. Towayti, Numerical modeling for crack self-healing concrete by microbial calcium carbonate, Construction and Building Materials, 189 (2018) 816-824.
[23] C. Xue, W. Li, J. Li, V.W. Tam, G. Ye, A review study on encapsulation‐based self‐healing for cementitious materials, Structural Concrete, 20(1) (2019) 98-212.
[24] E. Katoueizadeh, S.M. Zebarjad, K. Janghorban, Mechanical properties of epoxy composites embedded with functionalized urea-formaldehyde microcapsules containing an oxidizable oil, Materials Chemistry and Physics, 260 (2021) 124106.
[25] E. Katoueizadeh, S.M. Zebarjad, K. Janghorban, Investigating the effect of synthesis conditions on the formation of urea–formaldehyde microcapsules, Journal of Materials Research and Technology, 8(1) (2019) 541-552.
[26] E. Katoueizadeh, S.M. Zebarjad, K. Janghorban, Morphological study of surface-modified urea–formaldehyde microcapsules using 3-aminopropyltriethoxy silane, Polymer Bulletin, 76(3) (2019) 1317-1331.
[27] W. K. Ding, N.P. Shah, Effect of homogenization techniques on reducing the size of microcapsules and the survival of probiotic bacteria therein, Journal of Food Science, 74(6) (2009) M231-M236.
[28] S.J. Park, Y.S. Shin, J.R. Lee, Preparation and characterization of microcapsules containing lemon oil, Journal of Colloid and Interface Science, 241(2) (2001) 502-508.
[29] J. Cha, J. Kim, S. Ryu, S.H. Hong, Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets, Composites Part B: Engineering, 162 (2019) 283-288.
[30] X. Wang, R. Han, T.L. Han, N.X. Han, F. Xing, Determination of elastic properties of urea-formaldehyde microcapsules through nanoindentation based on the contact model and the shell deformation theory, Materials Chemistry and Physics, 215 (2018) 346-354.
[31] D. Polyzos, S.V. Tsinopoulos, D. Beskos, Static and dynamic boundary element analysis in incompressible linear elasticity, European Journal of Mechanics-A/Solids, 17(3) (1998) 515-536.
[32] Y. Zhao, W. Zhang, L.P. Liao, S. Wang, W.J. Li, Self-healing coatings containing microcapsule, Applied Surface Science, 258(6) (2012) 1915-1918.
[33] A. Beglarigale, D. Eyice, Y. Seki, Ç. Yalçınkaya, O. Çopuroğlu, H. Yazıcı, Sodium silicate/polyurethane microcapsules synthesized for enhancing self-healing ability of cementitious materials: Optimization of stirring speeds and evaluation of self-healing efficiency, Journal of Building Engineering, 39 (2021) 102279.
[34] T. Nesterova, K. Dam-Johansen, L.T. Pedersen, S. Kiil, Microcapsule-based self-healing anticorrosive coatings: Capsule size, coating formulation, and exposure testing, Progress in Organic Coatings, 75(4) (2012) 309-318.
[35] H. Ullah, K. A. M Azizli, Z.B. Man, M.B.C. Ismail, M.I. Khan, The potential of microencapsulated self-healing materials for microcracks recovery in self-healing composite systems: A review, Polymer Reviews, 56(3) (2016) 429-485.
[36] Y. Wang, D.T. Pham, C. Ji, Self-healing composites: A review, Cogent Engineering, 2(1) (2015) 1075686.
[37] N.V.N. Jyothi, P.M. Prasanna, S.N. Sakarkar, K.S. Prabha, P.S. Ramaiah, G. Srawan, Microencapsulation techniques, factors influencing encapsulation efficiency, Journal of Microencapsulation, 27(3) (2010) 187-197.
[38] M. Kosarli, D.G. Bekas, K. Tsirka, D. Baltzis, D.Τ. Vaimakis-Tsogkas, S. Orfanidis, G. Papavassiliou, A.S. Paipetis, Microcapsule-based self-healing materials: Healing efficiency and toughness reduction vs. capsule size, Composites Part B: Engineering, 171 (2019) 78-86.
[39] A. Ahmed, K. Sanada, M. Fanni, A. Abd El-Moneim, A practical methodology for modeling and verification of self-healing microcapsules-based composites elasticity, Composite Structures, 184 (2018) 1092-1098.
[40] R. De Borst, Computational methods for fracture in porous media: Isogeometric and extended finite element methods, Elsevier, 2017.
[41] A. F. Bower, Applied mechanics of solids, CRC Press 2009.
[42] N. Khun, D. Sun, M. Huang, J. Yang, C.J. Yue, Wear resistant epoxy composites with diisocyanate-based self-healing functionality, Wear, 313(1-2) (2014) 19-28.
[43] M. Samadzadeh, S.H. Boura, M. Peikari, A. Ashrafi, M. Kasiriha, Tung oil: An autonomous repairing agent for self-healing epoxy coatings, Progress in Organic Coatings, 70(4) (2011) 383-387.
[44] J.D. Littell, C.R. Ruggeri, R.K. Goldberg, G.D. Roberts, W.A. Arnold, W.K.E. Binienda, Measurement of epoxy resin tension, compression, and shear stress–strain curves over a wide range of strain rates using small test specimens, Journal of Aerospace Engineering, 21(3) (2008) 162-173. | ||
|
آمار تعداد مشاهده مقاله: 535 تعداد دریافت فایل اصل مقاله: 460 |
||