| تعداد نشریات | 24 |
| تعداد شمارهها | 917 |
| تعداد مقالات | 8,230 |
| تعداد مشاهده مقاله | 16,274,279 |
| تعداد دریافت فایل اصل مقاله | 13,749,802 |
Thermo-Mechanical Treatment of AlCoCrFeNi2.1 High-Entropy Alloy | ||
| Iranian Journal of Materials Forming | ||
| دوره 9، شماره 1، فروردین 2022، صفحه 41-46 اصل مقاله (1.6 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2022.42709.1210 | ||
| نویسندگان | ||
| S.A. Erfani Mobarakeh* ؛ K. Dehghani | ||
| Department of Materials and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave., P.O. Box 15875-4413, Tehran, Iran | ||
| چکیده | ||
| In this study, the microstructural evolutions, formed phases, micro- and macro-hardness changes and shear properties were evaluated in the as-cast, homogenized, cold-rolled and annealed AlCoCrFeNi2.1 eutectic high-entropy alloy (EHEA). These studies were carried out using X-ray fluorescence (XRF), scanning electron microscopy (SEM), Rockwell C and Vickers hardness testing as well as shear punch testing (SPT). The microstructure after cold rolling followed by annealing was consisted of an elongated phases/grains in the direction of cold rolling and in almost equiaxed phases/grains. The homogenized specimen has the minimum amounts of hardness and yield/ultimate shear strength. Due to the presence of both elongated and equiaxed structures in the cold-rolled and annealed sample, the hardness and yield/ultimate shear strength of this specimen is between that of as-cast and homogenized cases. | ||
| کلیدواژهها | ||
| Eutectic high-entropy alloy (EHEA)؛ Cold rolling؛ Annealing؛ Hardness؛ Shear punch test (SPT) | ||
| مراجع | ||
|
[1] S.S. Nene, K. Liu, M. Frank, R.S. Mishra, R.E. Brennan, K.C. Cho, Z. Li, D. Raabe, Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy, Scientific reports, 7(1) (2017) 1-7.
[2] D. Choudhuri, S. Shukla, P. Jannotti, S. Muskeri, S. Mukherjee, J. Lloyd and R.S. Mishra, Characterization of as-cast microstructural heterogeneities and damage mechanisms in eutectic AlCoCrFeNi2.1 high entropy alloy, Materials Characterization, 158 (2019) 109955.
[3] Y. Wang, W. Chen, J. Zhang, J. Zhou, A quantitative understanding on the mechanical behavior of AlCoCrFeNi2.1 eutectic high-entropy alloy, Journal of Alloys and Compounds, 850 (2021) 156610.
[4] E. Abbasi, K. Dehghani, Phase prediction and microstructure of centrifugally cast non-equiatomic Co-Cr-Fe-Mn-Ni (Nb, C) high entropy alloys, Journal of Alloys and Compounds, 783 (2019) 292-299.
[5] M.H. Asoushe, A.Z. Hanzaki, H.R. Abedi, B. Mirshekari, T. Wegener, S.V. Sajadifar and T. Niendorf, Thermal stability, microstructure and texture evolution of thermomechanical processed AlCoCrFeNi2.1 eutectic high entropy alloy, Materials Science and Engineering: A, 799 (2021) 140012.
[6] F. Otto, Y. Yang, H. Bei, E.P. George, Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys, Acta Materialia, 61(7) (2013) 2628-2638.
[7] O. N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, P.K. Liaw, Refractory high-entropy alloys, Intermetallics, 18(9) (2010) 1758-1765.
[8] M.H. Tsai, J.W. Yeh, High-entropy elloys: a critical review, Materials Research Letters, 2(3) (2014) 107-123.
[9] A.V. Kuznetsov, D.G. Shaysultanov, N.D. Stepanov, G.A. Salishchev, O.N. Senkov, Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions, Materials Science and Engineering: A, 533 (2012) 107-118.
[10] Y. Zhang, X. Wang, J. Li, Y. Huang, Y. Lu, X. Sun, Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.1, Materials Science and Engineering: A, 724 (2018) 148-155.
[11] Y. Lu, Y. Dong, S. Guo, L. Jiang, H. Kang, T. Wang, B. Wen, Z. Wang, J. Jei, Z. Cao, H. Ruan, T. Li, A promising new class of high-temperature alloys: eutectic high-entropy alloys, Scientific reports, 4(1) (2014) 1-5.
[12] X. Jin, Y. Zhou, L. Zhang, X. Du, B. Li, A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties, Materials Letters, 216 (2018) 144-146.
[13] X. Chen, J.Q. Qi, Y.W. Sui, Y.Z. He, F.X. Wei, Q.K. Meng, Z. Sun, Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys, Materials Science and Engineering: A, 681 (2017) 25-31.
[14] I. Wani, T. Bhattacharjee, S. Sheikh, Y. Lu, S. Chatterjee, S. Guo, Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy, IOP Conference Series: Materials Science and Engineering, 194(1) (2017) 012018.
[15] A. Lozinko, R. Gholizadeh, Y. Zhang, U. Klement, N. Tsuji, O. Mishin, Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy, Materials Science and Engineering: A, 833 (2022) 142558.
[16] E. Abbasi, K. Dehghani, Effect of Nb-C addition on the microstructure and mechanical properties of CoCrFeMnNi high entropy alloys during homogenisation, Materials Science and Engineering: A, 753 (2019) 224-231.
[17] E. Abbasi, K. Dehghani, Microstructure and mechanical properties of Co19Cr20Fe20Mn21Ni19 and Co19Cr20Fe20Mn21Ni19Nb0.06C0.8 high-entropy/compositionally-complex alloys after annealing, Materials Science and Engineering: A, 772 (2020) 138812.
[18] E. Lucon, J.T. Benzing, N. Derimow, N. Hrabe, Small punch testing to estimate the tensile and fracture properties of additively manufactured Ti-6Al-4V, Journal of Materials Engineering and Performance, 30(7) (2021) 5039-5049.
[19] R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, K.L. Murty, Evaluation of mechanical properties using shear–punch testing, Materials Science and Engineering: A, 395(1-2) (2005) 307-314.
[20] X. Gao, Y. Lu, B. Zhang, N. Liang, G. Wu, G. Sha, J. Liu, Y. Zhao, Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy, Acta Materialia, 141 (2017) 59-66.
[21] I.S. Wani, T. Bhattacharjee, S. Sheikh, P.P. Bhattacharjee, S. Guo, N. Tsuji, Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing, Materials Science and Engineering: A, 675 (2016) 99-109.
[22] I.S. Wani, T. Bhattacharjee, S. Sheikh, I.T. Clark, M.H. Park, T. Okawa, Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy, Intermetallics, 84 (2017) 42-51.
[23] S.R. Reddy, U. Sunkari, A. Lozinko, S. Guo, P.P. Bhattacharjee, Development and homogeneity of microstructure and texture in a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy severely strained in the warm-deformation regime, Journal of Materials Research, 34(5) (2019) 687-699. | ||
|
آمار تعداد مشاهده مقاله: 590 تعداد دریافت فایل اصل مقاله: 485 |
||