| تعداد نشریات | 24 |
| تعداد شمارهها | 917 |
| تعداد مقالات | 8,230 |
| تعداد مشاهده مقاله | 16,274,711 |
| تعداد دریافت فایل اصل مقاله | 13,751,992 |
Constitutive Modeling of a Nb-Contained Advanced High-Strength Steel (AHSS) under Hot Compression Experiments | ||
| Iranian Journal of Materials Forming | ||
| دوره 9، شماره 1، فروردین 2022، صفحه 24-30 اصل مقاله (1.6 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2022.42644.1208 | ||
| نویسندگان | ||
| H. Chavilian؛ R. Vafaei؛ H. Sheikh* | ||
| Department of Materials Engineering, Malek Ashtar University of Technology, Shahinshahr, Iran | ||
| چکیده | ||
| In this study, the evaluation of hot forming behavior of an advanced high-strength steel (AHSS), namely Nb-Contained dual phase (DP) steel, is carried out using hot compression tests at temperatures of 850, 900, and 950ºC with strain rates of 0.001, 0.01, and 0.1 (s-1). The resulting flow curves indicated the occurrence of dynamic recrystallization (DRX) at all different conditions of testing. Furthermore, based on the measured stress-strain data, material constants and activation energy (Q) were calculated for the peak stress. Additionally, the values of these constants were estimated for different true strains and the correlation between them and the strain has been illustrated by various diagrams. The comparison shows that the derived Arrhenius equation has an accepted accuracy for predicting the values of flow stress. | ||
| کلیدواژهها | ||
| Hot compression؛ Constitutive equation؛ High-strength steel؛ Dual phase steel | ||
| مراجع | ||
|
[1] N. Baluch, Z.M. Udin, C.S. Abdullah, Advanced high strength steel in Auton industries: an Overview, Engineering, Technology & Applied Science Research, 4(4) (2014) 686-689.
[2] K. Mukherjee, S. Hazra, M. Militzer, Grain refinement in dual-phase steels, Metallurgical and Materials Transactions A, 40(9) (2009) 2145-2159.
[3] W. Bleck, A. Frehn, J. Ohlert, Niobium in dual phase and trip steels, International Symposium on Niobium, Proceedings. Niobium, 2001, 727-752.
[4] F.R. Xiao, Y.B. Cao, G.Y. Qiao, X.B. Zhang, L.I.A.O. Bo, Effect of Nb solute and NbC precipitates on dynamic or static recrystallization in Nb steels, Journal of. Iron and Steel Research, International, 19(11) (2012) 52-56.
[5] J.C. Cao, Q.Y. Liu, Q.L. Yong, X.J. Sun, Effect of niobium on isothermal transformation of austenite to ferrite in HSLA low- carbon steel, Journal of. Iron and Steel Research, International, 14(3) (2007) 52-56.
[6] H. Niakan, A. Najafizadeh, Effect of niobium and rolling parameters on the mechanical properties and microstructure of dual phase steels, Materials Science and Engineering: A, 527(21-22) (2010) 5410-5414.
[7] J. Lee, S.J. Lee, B.C. De Cooman, Effect of micro-alloying elements on the stretch-flangeability of dual phase steel, Materials Science and Engineering: A, 536 (2012) 231-238.
[8] A. Ghatei Kalashami, A. Kermanpur, A. Najafizadeh, Y. Mazaheri, Effect of Nb on microstructures and mechanical properties of an ultrafine-grained dual phase steel, Journal of Materials Engineering and Performance, 24(8) (2015) 3008-3017.
[9] D. Samantaray, S. Mandal, A.K. Bhaduri, A comparative study on Johnson-Cook, modified Zerilli Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr-1Mo steel, Computational Materials Science, 47(2) (2009) 568-576.
[10] X. Qin, D. Huang, X. Yan, X. Zhang, M. Qi, S. Yue, Hot deformation behaviors and optimization of processing parameters for Alloy 602 CA, Journal of Alloys and Compounds, 770 (2019) 507-516.
[11] M. Rakhshkhorshid, N. Mollayi, A.R. Maldar, A SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy, Iranian Journal of Materials Forming. 4(2) (2017) 15-24.
[12] F. Yin, L. Hua, H. Mao, X. Han, Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments, Materials & Design, 43 (2013) 393-401.
[13] R. Ebrahimi, A. Najafizadeh, A new method for evaluation of friction in bulk metal forming, Journal of Materials Processing Technology, 152(2) (2004) 136-143.
[14] R.L. Goetz, S.L. Semiatin, The adiabatic correction factor for deformation heating during the uniaxial compression test, Journal of Materials Engineering and Performance, 10(6) (2001) 710-717.
[15] E.I. Poliak, J.J. Jonas, Initiation of dynamic recrystallization in constant strain rate hot deformation, ISIJ International, 43(5) (2003) 684- 691.
[16] E.I. Poliak, and J. J.Jonas, A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization, Acta Materialia, 44(1) (1996) 127-136.
[17] A. Najafizadeh, J.J. Jonas, Predicting of the critical stress for initiation of dynamic recrystallization, ISIJ International, 46(11) (2006) 1679-1684.
[18] H. Mirzadeh, A. Najafizade, Extrapolation of flow curves at hot working conditions, Materials Science and Engineering: A, 572(7-8) (2010) 1856-1860.
[19] H.J. McQueen, N.D. Ryan, Constitutive analysis in hot working, Materials Science and Engineering: A, 322(1-2) (2002) 43-63.
[20] H. Mirzadeh, A simplified approach for developing constitutive equations for modeling and prediction of hot deformation flow stress, Metallurgical and Materials Transactions A, 46(9) (2015) 4027-4037.
[21] A. Saboori, A. Abdi, S.A. Fatemi, G. Marchese, S. Biamino, H. Mirzadeh, Hot deformation behavior and flow stress modeling of Ti-6Al-4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field, Journal of Materials Science & Engineering A, 792 (2020) 139822.
[22] Y.C. Lin, M.S. Chen, J. Zhong, Constitutive modeling for elevated temperature flow behavior of 42CrMo steel, Computational Materials Science, 42(3) (2008) 470-477. | ||
|
آمار تعداد مشاهده مقاله: 517 تعداد دریافت فایل اصل مقاله: 654 |
||