Iranian Journal of Materials Forming, Issue 2, April 2021

[1] G. S. Schajer, Practical residual stress measurement methods,  John Wiley & Sons, 2013.

[2] A. Mahmoudi, D. Yoosef-Zadeh, and F. Hosseinzadeh, Residual Stresses Measurement in Hollow Samples Using Contour Method, International Journal of Engineering, 33(5) (2020)  885-893.

[3] K. Zhu, Z. Li, G. Fan, R. Xu, and C. Jiang, Thermal relaxation of residual stress in shot-peened CNT/Al–Mg–Si alloy composites, Journal of Materials Research and Technology, 8(2) (2019)  2201-2208.

[4] X. Liu, J. Liu, Z. Zuo, and H. Zhang, Numerical study on residual stress redistribution of shot-peened aluminum 7075-T6 under fretting loading, International Journal of Mechanical Sciences, 160 (2019)  156-164.

[5] K. Hemmesi, P. Mallet, and M. Farajian, Numerical evaluation of surface welding residual stress behavior under multiaxial mechanical loading and experimental validations, International Journal of Mechanical Sciences, 168 (2020)  105-127.

[6] X. Song, S. Feih, W. Zhai, C.N. Sun, F. Li, R. Maiti, J. Wei, Y. Yang, V. Oancea, L.R. Brandt, A.M. Korsunsky, Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components, Materials & Design, (2020) 108779.

[7] D. Ulutan, B. E. Alaca, and I. Lazoglu, Analytical modelling of residual stresses in machining, Journal of Materials Processing Technology, 183(1) (2007)  77-87.

[8] M.N. James, D.J. Hughes, Z. Chen, H. Lombard, D.G. Hattingh, D. Asquith, J.R. Yates, and P.J. Webster, Residual stresses and fatigue performance, Engineering Failure Analysis, 14(2) (2007)  384-395.

[9] C. Sonsino, Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry, International Journal of Fatigue,  31 no. 1 (2009)  88-101.

[10] K. Masubuchi, Analysis of welded structures: residual stresses, distortion, and their consequences. Elsevier, 2013.

[11] Q. Zhang, L. Yu, X. Shang, and S. Zhao, Residual stress relief of welded aluminum alloy plate using ultrasonic vibration, Ultrasonics, (2020) 106-164.

[12] K. Chin, S. Idapalapati, and D. Ardi, Thermal stress relaxation in shot peened and laser peened nickel-based superalloy, Journal of Materials Science & Technology, (2020).

[13] I. K. Lokshin, Vibration treatment and dimensional stabilization of castings, RUSS CAST PROD, 10 (1965)  454-457.

[14] B. Klauba and C. M. Adams, Progress report on the use and understanding of vibratory stress relief, in Proc. ASME Conf. on Productive Applications of Mechanical Vibrations, Phoenix, Arizona, (1982) 47-58.

[15] S. Kwofie, Plasticity model for simulation, description and evaluation of vibratory stress relief, Materials Science and Engineering: A, 516(1-2) (2009)  154-161.

[16] G. Adoyan, The vibratory stress relieving of castings, Machines and Tooling, 38(8) (1967)  18-22.

[17] R. Claxton, Vibratory stress relieving- an effective alternative to thermal treatment for component stabilisation, I. research, equipment and processing heat treatment of metals, 18(2) (1991)  53-59.

[18] C. Walker, A theoretical review of the operation of vibratory stress relief with particular reference to the stabilization of large-scale fabrications, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225(3) (2011)  195-204.

[19] F. Beer, E. Johnston, and J. DeWolf, Mechanics of materials, 2002 (McGraw-Hill, New York). 2002.

[20] R. McGoldrick and H. E. Saunders, Some experiments in stress‐relieving castings and welded structures by vibration, Journal of the american society for naval engineers, 55(4) (1943)  589-609.

[21] I. K. Lokshin, Vibration treatment and dimensional stabilization of castings, Russ cast prod,10 (1965).

[22] B. Klauba and C. M. Adams, Progress report on the use and understanding of vibratory stress relief, Proc. ASME Conf. on Productive Applications of Mechanical Vibrations, Phoenix, Arizona,   47-58.

[23] A. Munsi, A. Waddell, and C. Walker, The influence of vibratory treatment on the fatigue life of welds: A comparison with thermal stress relief, Strain, 37 (4) (2001)  141-149.

[24] W. F. Hahn, Vibratory residual stress relief and modifications in metals to conserve resources and prevent pollution, in "Final Report, Alfred University, Center of Environmental and Energy Research (CEER)," 2002, [Online]. Available: https://cfpub.epa.gov/ncer_abstracts/index.cfm/fuseaction/display.abstractDetail/abstract/7803/report/F.

[25] D. Rao, D. Wang, L. Chen, and C. Ni, The effectiveness evaluation of 314L stainless steel vibratory stress relief by dynamic stress, International Journal of Fatigue, 29(1) (2007)  192-196.

[26] J. Xu, L. Chen, and C. Ni, Effect of vibratory weld conditioning on the residual stresses and distortion in multipass girth-butt welded pipes, International Journal of Pressure vessels and piping, 84(5) (2007)  298-303.

[27] W. He, B. P. Gu, J. Y. Zheng, and R. J. Shen, Research on high-frequency vibratory stress relief of small Cr12MoV quenched specimens, Applied Mechanics and Materials, (2012) 1157-1161.

[28] T. Lv and Y. Zhang, 1719. A combined method of thermal and vibratory stress relief, Journal of Vibroengineering, 17 (6) (2015).

[29] H. Gao, Y. Zhang, Q. Wu, J. Song, and K. Wen, Fatigue life of 7075-T651 aluminium alloy treated with vibratory stress relief, International Journal of Fatigue, 108 (2018)  62-67.

[30] S. M. Ebrahimi, M. Farahani, and D. Akbari, The influences of the cyclic force magnitude and frequency on the effectiveness of the vibratory stress relief process on a butt welded connection, The International Journal of Advanced Manufacturing Technology, 102(5) (2019)  2147-2158.

[31] S.G. Chen, Y.D. Zhang, Q. Wu, H.J. Gao, and D.-Y. Yan, Residual stress relief for 2219 aluminum alloy weldments: A comparative study on three stress relief methods, Metals, 9(4) (2019)  419.

[32] N. Anekar, V. Ruiwale, S. Nimbalkar, and P. Rao, Design and testing of unbalanced mass mechanical vibration exciter, IJRET (2014) 2321-7308.

[33] TotalMateria. (2017). Totalmateria  [Online]. The world’s most comprehensive materials database.

[34] G. Salerno, C. Bennett, W. Sun, A. Becker, N. Palumbo, J. Kelleher, S.Y. Zhang, On the interaction between welding residual stresses: a numerical and experimental investigation, International Journal of Mechanical Sciences, 144 (2018) 654-667.

[35] J. Goldak, A. Chakravarti, and M. Bibby, A new finite element model for welding heat sources, Metallurgical transactions B, 15(2) (1984)  299-305.

[36] C. A. Guang-Ming Fu, Marcelo Igor Lourenço, Meng-Lan Duan, Segen F. Estefen, Finite Element Modeling Of Transient Temperature And Residual Tress Distribution Analysis In Multi-Pass Welding Process, ASME 2012 31st International Conference on Ocean (2012).

[37] P. Bouchard, The NeT bead-on-plate benchmark for weld residual stress simulation, International Journal of Pressure Vessels and Piping, 86(1) (2009)  31-42.

[38] M. Zubairuddin, S. Albert, M. Vasudevan, V. Chaudhari, and V. Suri, Finite element simulation of weld bead geometry and temperature distribution during GTA welding of modified 9CR-1MO steel and experimental validation, Journal for Manufacturing Science and Production, 14(4) (2014)  195-207.

[39] ABAQUS, Abaqus Analysis User’s Guide, vol. VOLUME IV: ELEMENTS Providence, RI, USA: Dassault Systèmes, 2011, 28.1.1-3-28.1.1-5.

[40] A. Mahmoudi, C. Aird, C. Truman, A. Mirzaee-Sisan, and D. Smith, Generating well defined residual stresses in laboratory specimens, in ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference, (2006) American Society of Mechanical Engineers, 631-639.