| تعداد نشریات | 24 |
| تعداد شمارهها | 929 |
| تعداد مقالات | 8,346 |
| تعداد مشاهده مقاله | 16,803,844 |
| تعداد دریافت فایل اصل مقاله | 14,117,960 |
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology | ||
| Iranian Journal of Materials Forming | ||
| دوره 7، شماره 2، دی 2020، صفحه 26-31 اصل مقاله (1.07 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2020.37855.1161 | ||
| نویسندگان | ||
| Gohar Ranjbari1؛ Ali Doniavi1؛ Mehrdad Shahbaz* 2 | ||
| 1Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran | ||
| 2Department of Materials Science and Engineering, Faculty of Engineering, Urmia University, Urmia, Iran | ||
| چکیده | ||
| The effect of geometrical parameters involved in vortex extrusion (VE) die design, on AA1050 aluminium alloy processed by VE were investigated using finite element analysis (FEA) and response surface methodology (RSM). For this, VE die length (L), reduction in area (RA), twist angle , and position of control points in Beziers' formulation (C1) were considered as input parameters and strain inhomogeneity was considered as a response. Both standard deviation (S.D) and inhomogeneity index (Ci) were used to quantify the strain inhomogeneity from FEA results. Analysis of variance (ANOVA) was used to determine the significant parameters and to mathematically model the strain inhomogeneity. It was concluded that standard deviation (S.D) is not a good choice for examining the strain inhomogeneity distribution in VE technique. ANOVA results showed that , RA, and interaction between and RA are the most significant parameters affecting the strain inhomogeneity. | ||
| کلیدواژهها | ||
| Vortex extrusion؛ Response surface methodology؛ Finite element analysis؛ Strain inhomogeneity | ||
| مراجع | ||
|
[1] E. Bagherpour, N. Pardis, M. Reihanian, R. Ebrahimi, An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications, The International Journal of Advanced Manufacturing Technology 100 (2019) 1647-1694. [2] E. Bagherpour, M. Reihanian, N. Pardis, R. Ebrahimi, T.G. Langdon, Ten years of severe plastic deformation (SPD) in Iran, part I: equal channel angular pressing (ECAP), Iranian Journal of Materials Forming 5 (2018) 71-113. [3] M. Reihanian, E. Bagherpour, N. Pardis, R. Ebrahimi, Nobuhiro Tsuji, Ten years of severe plastic deformation (SPD) in Iran, part II: accumulative roll bonding (ARB), Iranian Journal of Materials Forming 5 (2018) 1-25. [4] A. P. Zhilyaev, T. G. Langdon, Using high-pressure torsion for metal processing: fundamentals and applications, Progress in Materials Science 53 (2008) 893-979. [5] Y. Beygelzimer, V. Varyukhin, S. Synkov, D. Orlov, Useful properties of twist extrusion, Materials Science and Engineering A 503 (2009) 14-17. [6] M. I. Latypov, I. V. Alexandrov, Y. E. Beygelzimer, S. Lee, H. S. Kim, Finite element analysis of plastic deformation in twist extrusion, Computational Materials Science: 60 (2012) 194-200. [7] Y. Beygelzimer, R. Kulagin, M. I. Latypov, V. Varyukhin, H. S. Kim, Off-axis twist extrusion for uniform processing of round bars, Metals and Materials International 21 (2015) 734-740. [8] M. Shahbaz, N. Pardis, R. Ebrahimi, B. Talebanpour, A novel single pass severe plastic deformation technique: Vortex extrusion, Materials Science and Engineering A 530 (2011)469-472. [9] H. Ataei, M. Shahbaz, H. S. Kim, N. Pardis, Finite element analysis of severe plastic deformation by rectangular vortex extrusion (RVE), Metals and Materials International (2020). [10] M. Shahbaz, N. Pardis, J. G. Kim, R. Ebrahimi, H. S. Kim, Experimental and finite element analyses of plastic deformation behavior in vortex extrusion, Materials Science and Engineering A 674 (2016) 472-479. [11] M. Shahbaz, R. Ebrahimi, H. S. Kim, Streamline approach to die design and investigation of material flow during vortex extrusion process, Applied Mathematical Modelling 40 (2015) 3550-3560. [12] M. Shahbaz, J. G. Kim, R. Ebrahimi, H. S. Kim, Prediction of extrusion pressure in vortex extrusion using a streamline approach, Iranian Journal of Materials Forming 4 (2017) 52-56. [13] G. Ranjbari, A. Doniavi, M. Shahbaz, Numerical modelling and simulation of vortex extrusion as a severe plastic deformation technique using response surface methodology and finite element analysis, Metals and Materials International, in print, 7 (2020). [14] G. Ranjbari, A. Doniavi, M. Shahbaz, R. Ebrahimi, Effect of processing parameters on the strain inhomogeneity and processing load in vortex extrusion of Al-Mg-Si alloy, Metals and Materials International, (2020). [15] Design Expert 11, Stat-Ease, Inc. [16] SH. Molaei, M. Shahbaz, R. Ebrahimi, The relationship between constant friction factor and coefficient of friction in metal forming using finite element analysis, Iranian Journal of Materials Forming 1 (2014) 14-22. [17] DEFORM-3D V10, Scientific Forming Technologies Corporation (SFTC). [18] N. Q. Chinh, G. Horváth, Z. Horita, T. G. Langdon, A new constitutive relationship for the homogeneous deformation of metals over a wide range of strain, Acta Materialia 52 (2004) 3555-3563. [19] U. M. Iqbal, V. S. Kumar, S. Gopalakannan, Application of response surface methodology in optimizing the process parameters of twist extrusion process for AA6061-T6 aluminium alloy, Measurement, 94 (2016) 126-138. [20] M. Shahbaz, N. Pardis, J. Moon, R. Ebrahimi, H. S. Kim, Microstructural and mechanical properties of the material processed by streamline proposed vortex extrusion, Metals and Materials International, (2020) Accepted. | ||
|
آمار تعداد مشاهده مقاله: 508 تعداد دریافت فایل اصل مقاله: 527 |
||