The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process

[1] A.S. Wifi, "An incremental complete solution of the stretch-forming and deep-drawing of a circular blank using a hemispherical punch," International Journal of Mechanical Sciences 18 (1976) 23-31.

[2] K. Manabe, H. Koyama, S. Yoshihara, T. Yagami, "Development of a combination punch speed and blank-holder fuzzy control system for the deep-drawing process," Journal of Materials Processing Technology 125-126 (2002) 440-445.

[3] M.T. Browne, M.T. Hillery, "Optimising the variables when deep-drawing C.R.1 cups," Journal of Materials Processing Technology 136 (2003) 64-71.

[4] S. Kataoka, M. Murakawa, T. Aizawa, H. Ike, "Tribology of dry deep-drawing of various metal sheets with use of ceramics tools," Surface and Coatings Technology 177-178 (2004) 582-590.

[5] S. Yoshihara, K. Manabe, H. Nishimurab, "Effect of blank-holder force control in deep-drawing process of magnesium alloy sheet," Journal of Materials Processing Technology 170 (2005) 579-585.

[6] M. Gavas, M. Izciler, "Effect of blank-holder gap on deep-drawing of square cups," Materials & Design 28 (2007) 1641-1646.

[7] S.H. Zhang, K. Zhang, Y.C. Xu, Z.T. Wang, Y. Xu, Z.G. Wang, "Deep-drawing of magnesium alloy sheets at warm temperatures," Journal of Materials Processing Technology, 185 (2007) 147-151.

[8] G. Palumbo, D. Sorgente, L. Tricarico, S.H. Zhang, W.T. Zheng "Numerical and experimental investigations on the effect of the heating strategy and the punch speed on the warm deep-drawing of magnesium alloy AZ31," Journal of Materials Processing Technology 191 (2007) 342-346.

[9] H.I. Demirci, M. Yasar, K. Demiray, M. Karali, "The theoretical and experimental investigation of blank-holder forces plate effect in deep-drawing process of Al1050 material," Materials & Design 29 (2008) 526-532.

[10] C. Özek, M. Bal, "The effect of die/blank-holder and punch radiuses on limit drawing ratio in angular deep-drawing dies," The International Journal of Advanced Manufacturing Technology 40 (2009) 1077-1083.

[11] S. Raju, G. Ganesan, R. Karthikeyan, "Influence of variables in deep-drawing of AA 6061 sheet," Transactions of Nonferrous Metals Society of China 20 (2010) 1856-1862.

[12] M. Kadkhodayan, F. Moayyedian, "Analytical elastic-plastic study on flange wrinkling in deep-drawing process," International Journal of Science & Technology 18 (2011) 250-260.

[13] S. Bagherzadeh, B. Mollaei-Dariani, K. Malekzadeh, "Theoretical study on hydro-mechanical deep-drawing process of bimetallic sheets and experimental observations," Journal of Materials Processing Technology 212 (2012) 1840-1849.

[14] M. Bao, W. Min, W.U. Xiang-dong, Z. Ying-ke, "Development of thermal deep-drawing system with vacuum environment for difficult-to-deformation materials," Transaction of Nonferrous Metals Society of China  22 (2012) 254-260.

[15] F. Gong, B. Guo, C. Wang, D. Shan, "Micro deep-drawing of micro cups by using DLC film coated blank-holders and dies," Diamond and Related Materials 20 (2011) 196-200.

[16] S.A. Ossia, B. Soltani, "Finite element simulation of the warm deep-drawing process in forming a circular cup from magnesium alloy sheet," International Journal of Science & Technology 20 (2013) 1213-1220.

[17] Y.M. Huang, Y.S. Wu, J.M. Huang, "The influence of ultrasonic vibration-assisted micro-deepdrawing process," The International Journal of Advanced Manufacturing Technology 71 (2014) 1455-1461.

[18] H. Zein, M. El sherbiny, M. Abd-Rabou, M. El shazly, "Thinning and spring back prediction of sheet metal in the deep-drawing process," Materials & Design 53 (2014) 797- 808.

[19] A.C. Reddy, "Parametric optimization of warm deep-drawing process of 2014T6 aluminium alloy using FEA," International Journal of Scientific & Engineering Research 06 (2015) 1016- 1024.

[20] A.C. Reddy, "Formability of superplastic deep-drawing process with moving blank-holder for AA1050-H18 conical cups," International Journal of Research in Engineering and Technology, 04 (2015) 124-132.

[21] S. Katayama, S. Natsume, K. Yamazaki, J. Han, H. Uchida, " Numerical investigation and optimization of pulsating and variable blank-holder force for identification of formability window for deep-drawing of cylindrical cup,"The International Journal of Advanced Manufacturing Technology82 (2016) 583-593.

[22] W. Ma, B. Wang, J. Zhou, M. Huang, "Influence of process parameters on deep-drawing of AA6111 aluminium alloy at elevated temperatures,"Journal of Central South University22 (2015) 1167-1174.

[23] W.K. Jawad, A.S. Jaafar, "The influence of punch profile radius on deep-drawing process in case of a low carbon steel cylindrical cup," Engineering and Technology Journal 36 (2018) 1048-1058.

[24] B.T. Lin, K.M. Huang, C.C. Kuo, W.T. Wang, "Improvement of deep drawability by using punch surfaces with ridges," Journal of Materials Processing Technology 225 (2015) 275-285.

[25] S. Kataoka, M. Murakawab, T. Aizawac,  H. Iked, "Tribology of dry deep-drawing of various metal sheets with use of ceramics," Surface and Coatings Technology 177-178 (2004) 582-590.

[26] M. Geiger, "Towards clean forming technologies," CIRP Annals-Manufacturing Technology 44 (1995) 581-592.

[27] M. Arentoft, N. Bay, P.T. Tang, J.D. Jensen, "A new lubricant carrier for metal forming," CIRP Annals-Manufacturing Technology 58 (2009) 243-246.

[28] A. Brosius, A. Mousavi, "Lubricant free deep-drawing process by macro structured tools," CIRP Annals-Manufacturing Technology 65 (2016) 253-256.