| تعداد نشریات | 24 |
| تعداد شمارهها | 859 |
| تعداد مقالات | 7,631 |
| تعداد مشاهده مقاله | 13,515,839 |
| تعداد دریافت فایل اصل مقاله | 11,638,212 |
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation | ||
| Iranian Journal of Materials Forming | ||
| دوره 7، شماره 1، تیر 2020، صفحه 2-13 اصل مقاله (1.84 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2019.34488.1136 | ||
| نویسنده | ||
| M. Rakhshkhorshid* | ||
| Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran | ||
| چکیده | ||
| Johnson-Cook constitutive equation is one of the most famous constitutive equations that have ever been developed to model the hot deformation flow curves of different materials. This equation is a predefined model in the traditional finite element codes to describe the material behavior in applications such as simulating the manufacturing processes. In this work, two different genetic algorithm-based (GA) optimization procedures, referred to as free and constrained optimization procedures, were proposed to find the constants of the Johnson-Cook constitutive equation. The proposed procedures were applied to fit the Johnson-Cook constitutive equation on the experimental flow curves of API X65 pipeline steel. According to the obtained constants, the modeling performances of the proposed procedures were compared with each other and with the modeling performance of the conventional procedure of finding the constants of the Johnson-Cook equation. Root mean square error (RMSE) criterion was used to asses and to compare the performances of the examined procedures. According to the obtained results, it was determined that the proposed free GA based optimization procedure with the RMSE value of 7.2 MPa had the best performance, while the performance of the conventional procedure was the worst. | ||
| کلیدواژهها | ||
| Genetic algorithm؛ Hot deformation؛ Flow stress؛ Constitutive equations؛ Johnson-Cook equation؛ API X65 pipeline steel | ||
| مراجع | ||
|
[1] G. R. Johnson, W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, (1983) 541-543. [2] Y. C. Lin, X. M. Chen, A critical review of experimental results and constitutive descriptions for metals and alloys in hot working, Materials & Design, 32 (4) (2011) 1733-1759. [3] W. Song, J. Ning, X. Mao, H. Tang, A modified Johnson-Cook model for titanium matrix composites reinforced with titanium carbide particles at elevated temperatures, Materials Science and Engineering: A, 576 (2013) 280-289. [4] H. Y. Li, X. F. Wang, J. Y. Duan, J. J. Liu, A modified Johnson-Cook model for elevated temperature flow behavior of T24 steel, Materials Science and Engineering: A, 577 (2013) 138-146. [5] J. Q. Tan, M. Zhan, S. Liu, T. Huang, J. Guo, H. Yang, A modified Johnson-Cook model for tensile flow behaviors of 7050-T7451 aluminum alloy at high strain rates, Materials Science and Engineering: A, 631 (2015) 214-219. [6] Y. C. Lin, X. M. Chen, G. Liu, A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel, Materials Science and Engineering: A, 527 (26) (2010) 6980-6986. [7] Z. Akbari, H. Mirzadeh, J. M. Cabrera, A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation, Materials & Design, 77 (2015) 126-131. [8] E. Shafiei, K. Dehghani, Prediction of single-peak flow stress curves at high temperatures using a new logarithmic-power function, Journal of Materials Engineering and Performance, 25 (9) (2016) 4024-4035. [9] Abaqus 6.10 Documentation, Dassault Systemes, (2010). [10] LS-DYNA User’s manual, Livermore Software Technology Corporation (LSTC). [11] J. Trajkovski, R. Kunc, V. Pepel, I. Prebil, Flow and fracture behavior of high-strength armor steel PROTAC 500, Materials & Design, 66 (2015) 37-45. [12] A. K. Gupta, V. K. Anirudh, S. K. Singh, Constitutive models to predict flow stress in Austenitic Stainless Steel 316 at elevated temperatures, Materials & Design, 43 (2013) 410-418. [13] L. Gambirasio, E. Rizzi, On the calibration strategies of the Johnson-Cook strength model: Discussion and applications to experimental data, Materials Science and Engineering: A, 610 (2014) 370-413. [14] J. Knust, F. Podszus, M. Stonis, B. A. Behrens, L. Overmeyer, G. Ullmann, Preform optimization for hot forging processes using genetic algorithms, The International Journal of Advanced Manufacturing Technology, 89 (5-8) (2017) 1623-1634. [15] M. Zain-ul-abdein, D. Nélias, J.F. Jullien, A. I. Wagan, Thermo-mechanical characterisation of AA 6056-T4 and estimation of its material properties using Genetic Algorithm, Materials & Design, 31 (2010) 4302–4311. [16] S. Keshavarz, A. R. Khoei, Z. Molaeinia, Genetic algorithm-based numerical optimization of powder compaction process with temperature-dependent cap plasticity model, The International Journal of Advanced Manufacturing Technology, 64 (5-8) (2013) 1057-1072. [17] M. Rakhshkhorshid, S. H. Hashemi, Experimental study of hot deformation behavior in API X65 steel, Materials Science and Engineering: A, 573 (2013) 37-44. [18] API Specifications 5L, Specifications for LinePipe, 44th Edition, American Petroleum Institute, USA (2007). [19] A. He, G. Xie, H. Zhang, X. Wang, A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel, Materials & Design, 52 (2013) 677-685. [20] A. Abbasi-Bani, A. Zarei-Hanzaki, M. H. Pishbin, N. Haghdadi, A comparative study on the capability of Johnson-Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg–6Al–1Zn alloy, Mechanics of Materials, 71 (2014) 52-61. [21] A. I. Ferreiro, M. Rabaçal, M. Costa, A combined genetic algorithm and least squares fitting procedure for the estimation of the kinetic parameters of the pyrolysis of agricultural residues, Energy conversion and management, 125 (2016) 290-300. [22] X. B. Wang, Effects of constitutive parameters on adiabatic shear localization for ductile metal based on Johnson-Cook and gradient plasticity models, Transactions of Nonferrous Metals Society of China 16 (6) (2006) 1362-1369. [23] J. Dean, A. S-Fallah, P. M. Brown, L. A. Louca, T. W. Clyne, Energy absorption during projectile perforation of lightweight sandwich panels with metallic fibre cores, Composite Structures 93 (3) (2011) 1089-1095. [24] D. Samantaray, S. Mandal, U. Borah, A.K. Bhaduri, P.V. Sivaprasad, A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel, Materials Science and Engineering: A, 526 (2009) 1–6. [25] O. E. Canyurt, H. R. Kim, K. Y. Lee, Estimation of laser hybrid welded joint strength by using genetic algorithm approach, Mechanics of Materials, 40 (10) (2008) 825–831. | ||
|
آمار تعداد مشاهده مقاله: 431 تعداد دریافت فایل اصل مقاله: 431 |
||