| تعداد نشریات | 24 |
| تعداد شمارهها | 859 |
| تعداد مقالات | 7,631 |
| تعداد مشاهده مقاله | 13,515,236 |
| تعداد دریافت فایل اصل مقاله | 11,637,817 |
Modeling of Corrosion-Fatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique | ||
| Iranian Journal of Materials Forming | ||
| مقاله 7، دوره 6، شماره 1، تیر 2019، صفحه 64-73 اصل مقاله (1.72 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2019.31492.1113 | ||
| نویسندگان | ||
| N. Anjabin* ؛ F. Arabloo | ||
| Department of Materials Science and Engineering, School of Engineering , Shiraz University, Shiraz, Iran | ||
| چکیده | ||
| Understanding crack growth behavior in engineering components subjected to cyclic fatigue loadings is necessary for design and maintenance purpose. Fatigue crack growth (FCG) rate strongly depends on the applied loading characteristics in a nonlinear manner, and when the mechanical loadings combine with environmental attacks, this dependency will be more complicated. Since, the experimental investigation of FCG behavior under various loading and environmental conditions is time-consuming and expensive, applying a reliable methodology for prediction of this property is essential. In this regard, a modeling technique based on least square support vector machine (LSSVM) framework is employed for prediction of FCG behavior of three different alloys including, Ti-6Al-4V alloy and two Cu-strengthened high strength low alloy (HSLA) steels in the air and corrosive media. The parameters of the developed model were calculated employing the coupled simulated annealing optimization technique. The performance and accuracy of the developed models were tested and validated by their ability to predict the experimental data. Statistical error analyses indicated that the developed model can satisfactorily represent the experimental data with high accuracy. | ||
| کلیدواژهها | ||
| Corrosion-fatigue crack growth؛ Modeling؛ LSSVM؛ Ti-6Al-4V؛ HSLA steel | ||
| مراجع | ||
|
[1] R. Ghosh, Remaining life assessment of engineering components, Recent Trends in Structural Integrity Assessment, National Metallurgical Laboratory, India (2001) pp. 1-17.
[2] E. Santecchia, A. Hamouda, F. Musharavati, E. Zalnezhad, M. Cabibbo, M.E. Mehtedi, S. Spigarelli, A review on fatigue life prediction methods for metals, Advances in Materials Science and Engineering (2016) 1-26.
[3] W. Zhang, H. Liu, Q. Wang, J.J.M. He, A fatigue life prediction method based on strain intensity factor, Materials 10 (7) (2017) 689.
[4] R. Brighenti, A. Carpinteri, N. J. Corbari, Damage mechanics and Paris regime in fatigue life assessment of metals, International Journal of Pressure Vessels and Piping 104 (2013) 57-68.
[5] J. Mazars, G. Pijaudier-Cabot, From damage to fracture mechanics and conversely: a combined approach, International Journal of Solids and Structures 33 (20-22) (1996) 3327-3342.
[6] V. Shenoy, I.A. Ashcroft, G.W. Critchlow, A.D. Crocombe, Fracture mechanics and damage mechanics based fatigue lifetime prediction of adhesively bonded joints subjected to variable amplitude fatigue, Engineering Fracture Mechanics 77 (7) (2010) 1073-1090.
[7] G. C. Sih, E.T. Moyer Jr, Path dependent nature of fatigue crack growth, Engineering Fracture Mechanics 17 (3) (1983) 269-280.
[8] Z. Božić, S. Schmauder, M. Mlikota, Fatigue growth models for multiple long cracks in plates under cyclic tension bas on ΔKI, ΔJ-integral and ΔCTOD parameter, Key Engineering Materials 488 (2012) 525-528.
[9] A. F. Siqueira, C.A.R.P. Baptista, O.L.C. Guimarães, C.O.F.T. Ruckert, Describing the total fatigue crack growth curves for aluminum alloys with an exponential equation, Procedia Engineering 2 (1) (2010) 1905-1914.
[10] E. Richey III, A.W. Wilson, J.M. Pope, R.P. Gangloff, Computer modeling the fatigue crack growth rate behavior of metals in corrosive environments, NASA Contractor Report 194982, Virginia (1994).
[11] T. T. Shih, R.P. Wei, A study of crack closure in fatigue, Engineering Fracture Mechanics 6 (1) (1974) 19-32.
[12] C. Proppe and G. Schuëller, Stochastic analysis of fatigue crack growth, In ICF10, Honolulu, USA (2001).
[13] R. M.V. Pidaparti and M.J. Palakal, Neural network approach to fatigue-crack-growth predictions under aircraft spectrum loadings, Journal of Aircraft 32 (4) (1995) 825-831.
[14] J. Mohanty, B. Verma, D. Parhi, P. Ray, Application of Artificial Neural Network for Predicting Fatigue Crack Propagation Life of Aluminum Alloys, Association of Computational Materials Science and Surface Engineering 1 (2009) 133.
[15] W. Zhang, Z. Bao, S. Jiang, J. He, An Artificial Neural Network-Based Algorithm for Evaluation of Fatigue Crack Propagation Considering Nonlinear Damage Accumulation, Materials 9 (6) (2016) 483.
[16] H. Wang, W. Zhang, F. Sun, W.J.M. Zhang, A Comparison Study of Machine Learning Based Algorithms for Fatigue Crack Growth Calculation, Materials 10 (5) (2017) 543.
[17] W. C. Hong, F.M. Lai, J.H. Wu, P.F. Pai, S.L. Yang, Feasibility Assessment of Support Vector Regression Models with Immune Algorithms in Predicting Fatigue Life of Composites, In Join Conference on Information Sciences, Taiwan (2006) 1220.
[18] W. Song, Z. Jiang, H. Jiang, Predict the fatigue life of crack based on extended finite element method and SVR, In AIP Conference Proceedings 1967 (1) (2018) 30024.
[19] J. Mohanty, T. Mahanta, A. Mohanty, D. N. Thatoi, Prediction of constant amplitude fatigue crack growth life of 2024 T3 Al alloy with R-ratio effect by GP, Applied Soft Computing 26(2015) 428-434.
[20] Y. Cheng, W. Huang, C.J. Zhou, Artificial neural network technology for the data processing of on-line corrosion fatigue crack growth monitoring, International Journal of Pressure Vessels and Piping 76 (2) (1999) 113-116.
[21] M. E. Haque, K. J. Sudhakar, Prediction of corrosion–fatigue behavior of DP steel through artificial neural network, International Journal of Fatigue 23 (1) (2001) 1-4.
[22] J. A. K. Suykens, J. Vandewalle, Least Squares Support Vector Machine Classifiers, Neural Processing Letters 9 (3) (1999) 293-300.
[23] C. Cortes, V. Vapnik, Support-vector networks, Mach Learn 20 (3) (1995) 273-297.
[24] V. Vapnik, The Nature of Statistical Learning Theory, Springer (2000).
[25] A. Baylar, D. Hanbay, M. Batan, Application of least square support vector machines in the prediction of aeration performance of plunging overfall jets from weirs, Expert Systems with Applications 36 (4) (2009) 8368- 8374.
[26] S. Rafiee-Taghanaki, M. Arabloo, A. Chamkalani, M. Amani, M.H. Zargari, M.R. Adelzadeh, Implementation of SVM framework to estimate PVT properties of reservoir oil, Fluid Phase Equilibria 346 (2013) 25-32.
[27] E. D. Übeyli˙, Least squares support vector machine employing model-based methods coefficients for analysis of EEG signals, Expert Systems with Applications 37 (1) (2010) 233-239.
[28] S. R. Amendolia, G. Cossu, M. L. Ganadu, B. Golosio, G. L. Masala, G.M. Mura, A comparative study of K-Nearest Neighbour, Support Vector Machine and Multi-Layer Perceptron for Thalassemia screening, Chemometrics and Intelligent Laboratory Systems 69 (1-2) (2003) 13-20.
[29] T. S. Chen, J. Chen, Y.C. Lin, Y.C. Tsai, Y.H. Kao, K. Wu, A Novel Knowledge Protection Technique Base on Support Vector Machine Model for Anti-classification, In Zhu M (ed) Electrical Engineering and Control, Lecture Notes in Electrical Engineering, Springer Berlin Heidelberg (2011) 517-524.
[30] Y. F. Zhang, J.Y.H. Fuh, A Neural Network Approach for Early Cost Estimation of Packing Products, Computers & Industrial Engineering 34 (2) (1998) 433-450.
[31] S. Deng, T.H. Yeh, Applying least squares support vector machines to the airframe wing-box structural design cost estimation, Expert Systems with Applications 37 (12) (2010) 8417-8423.
[32] J. Bode, Decision support with neural networks in the management of research and development: Concepts and application to cost estimation, Information and Management 34 (1) (1998) 33-40.
[33] B. Verlinden, J.R. Duflou, P. Collin, D. Cattrysse, Cost estimation for sheet metal parts using multiple regression and artificial neural networks: A case study, International Journal of Production Economics 111 (2) (2008) 484-492.
[34] K. S. Shin, T.S. Lee, H.J. Kim, An application of support vector machines in bankruptcy prediction model, Expert Systems with Applications 28 (1) (2005) 127-135.
[35] J. A. K. Suykens, T. Van Gestel, J. De Brabanter, B. De Moor, J. Vandewalle, Least Squares Support Vector Machines, World Scientific Publishing Co Pte Ltd, Singapor (2002).
[36] M. M. Ghiasi, A. Shahdi, P. Barati, M. Arabloo, Robust Modeling Approach for Estimation of Compressibility Factor in Retrograde Gas Condensate Systems, Industrial & Engineering Chemistry Research 53 (32) (2014) 12872-12887.
[37] N. M. Mahmoodi, M. Arabloo, J. Abdi, Laccase immobilized manganese ferrite nanoparticle: Synthesis and LSSVM intelligent modeling of decolorization, Water Research 67 (2014) 216-226.
[38] H. Wang, D. Hu, Comparison of SVM and LS-SVM for regression, In International Conference on Neural Networks and Brain, Beijing, China (2005) 279-283.
[39] S. Sivaprasad, S. Tarafder, V. Ranganath, M. Tarafder, K.J. Ray, Corrosion fatigue crack growth behaviour of naval steels, Corrosion Science 48 (8) (2006) 1996-2013.
[40] M. Arabloo, A. Shokrollahi, F. Gharagheizi, A.H. Mohammadi, Toward a predictive model for estimating dew point pressure in gas condensate systems, Fuel Processing Technology 116 (2013) 317-324.
[41] A. Farasat, A. Shokrollahi, M. Arabloo, F. Gharagheizi, A. H. Mohammadi, Toward an intelligent approach for determination of saturation pressure of crude oil, Fuel Processing Technology 115 (2013) 201-2014.
[42] A. Eslamimanesh, F. Gharagheizi, A.H. Mohammadi, D. Richon, Phase Equilibrium Modeling of Structure H Clathrate Hydrates of Methane + Water “Insoluble” Hydrocarbon Promoter Using QSPR Molecular Approach, J. Journal of Chemical & Engineering Data 56 (10) (2011) 3775-3793.
[43] S. Xavier-de-Souza, J.A. Suykens, J. Vandewalle, D. Bollé, Coupled simulated annealing, IEEE Transactions on Systems, Man, and Cybernetics 40 (2) (2010) 320-335.
[44] H. Masuda, S. Matsuoka, The mechanism of corrosion fatigue crack propagation in structural steels under variable loading, Corrosion Science 30 (6–7) (1990) 631-642.
[45] M. Fonte, S. Stanzl-Tschegg, B. Holper, E. Tschegg, A.K. Vasudevan, The microstructure and environment influence on fatigue crack growth in 7049 aluminum alloy at different load ratios, International Journal of Fatigue 23 (2001) 311-317. | ||
|
آمار تعداد مشاهده مقاله: 863 تعداد دریافت فایل اصل مقاله: 877 |
||