| تعداد نشریات | 24 |
| تعداد شمارهها | 851 |
| تعداد مقالات | 7,575 |
| تعداد مشاهده مقاله | 13,413,725 |
| تعداد دریافت فایل اصل مقاله | 11,580,442 |
A SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy | ||
| Iranian Journal of Materials Forming | ||
| مقاله 2، دوره 4، شماره 2، دی 2017، صفحه 15-24 اصل مقاله (1.41 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2017.22296.1062 | ||
| نویسندگان | ||
| M. Rakhshkhorshid* 1؛ N. Mollayi2؛ A.R. Maldar3 | ||
| 1Department of Mechanical Engineering, Birjand University of Technology, POBOX 97175-569, Birjand, Iran | ||
| 2Department of Computer Engineering and Information Technology, Birjand University of Technology, POBOX 97175-569, Birjand, Iran | ||
| 3No affiliation | ||
| چکیده | ||
| Abstract In this work, a support vector machine (SVM) model was developed to predict the hot deformation flow curves of AZ91 magnesium alloy. The experimental stress-strain curves, obtained from hot compression testing at different deformation conditions, were sampled. Consequently, a data base with the input variables of the deformation temperature, strain rate and strain and the output variable of flow stress was prepared. To develop the support vector machine (SVM) model, the overall data was divided into two subsets of training and testing (randomly selected). Root mean square error (RMSE) criterion was used to evaluate the prediction performance of the developed model. The low RMSE value calculated for the developed model showed the robustness of it to predict the hot deformation flow curves of tested alloy. Also, the performance of the SVM model was compared with the performance of some previously used constitutive equations. The overall results showed the better performance of the SVM model over them. | ||
| کلیدواژهها | ||
| Support Vector Machine؛ Radial Basis Function؛ Hot compression؛ Flow stress | ||
| مراجع | ||
|
[1] L. Yang, H. Hou, Y.H. Zhao, X.M Yang, Effect of applied pressure on microstructure and mechanical properties of Mg-Zn-Y quasicrystal-reinforced AZ91D magnesium matrix composites prepared by squeeze casting, Trans. Nonferrous Met. Soc. China 25 (2015) 3936-3943.
[2] Y. Li, Y. Chen, H. Cui, J. Ding, L. Zuo, J. Zhang, Hot deformation behavior of a spray-deposited AZ31 magnesium alloy, Rare Metals 28 (2009) 91–97.
[3] K.U. Kainer, Magnesium—Alloys and Technology, Wiley-VCH, Germany, (2003).
[4] S.J. Liang, Z.Y. Liu, E.D. Wang, Mechanical properties and texture evolution during rolling process of an AZ31 Mg alloy, Materials Letters 62 (2008) 3051–3054.
[5] Y.C. Lin, X.M. Chen, A critical review of experimental results and constitutive descriptions for metals and alloys in hot working, Materials and Design 32 (2011) 1733–1759.
[6] L. Gambirasio, E. Rizzi, On the calibration strategies of the Johnson–Cook strength model: Discussion and applications to experimental data, Materials Science and Engineering: A 610 (2014) 370–413.
[7] Z. Akbari, H. Mirzadeh, J.M. Cabrera, A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation, Materials and Design 77 (2015) 126–131.
[8] A. Abbasi-Bani, A. Zarei-Hanzaki, M.H. Pishbin, N. Haghdadi, A comparative study on the capability of Johnson–Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg–6Al–1Zn alloy, Mechanics of Materials 71 (2014) 52-61.
[9] P.J. Zerilli, R.W. Armstrong, Dislocation-mechanics-based constitutive relations for material dynamics calculations, Journal of Applied Physics 61 (1987) 1816–1825.
[10] Y.C. Lin, M.S. Chen, J. Zhang, Constitutive modeling for elevated temperature flow behavior of 42CrMo steel, Computational Materials Science 424 (2008) 470–477.
[11] D.L. Preston, D.L. Tonks, D.C. Wallace, Model of plastic deformation for extreme loading conditions, Journal of Applied Physics 93 (2003) 211–20.
[12] H. Mirzadeh, J.M. Cabrera, J.M. Prado, A. Najafizadeh, Modeling and prediction of hot deformation flow curves, Metallurgical and Materials Transactions A 43 (2012) 108–123.
[13] R.K. Desu, S.C. Guntuku, A. Balu, A.K. Gupta, Support Vector Regression based Flow Stress Prediction in Austenitic Stainless Steel 304, Procedia Materials Science 6 ( 2014 ) 368 – 375.
[14] M. Rakhshkhorshid, A.R. Maldar, A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy, Iranian Journal of Materials Forming 3(1) (2016) 27-37.
[15] G.R. Ebrahimi, A.R. Maldar, R. Ebrahimi, A. Davoodi, Effect of thermomechanical parameters on dynamically recrystallized grain size of AZ91 magnesium alloy, J. Alloys Compd. 509 (2011) 2703– 2708.
[16] M. Rakhshkhorshid, S.H. Hashemi, Experimental study of hot deformation behavior in API X65 steel, Mater. Sci. Eng., A 573, (2013) 37–44.
[17] M. Shaban, B. Eghbali, Determination of critical conditions for dynamic recrystallization of a microalloyed steel, Mater. Sci. Eng., A 527, (2010) 4320–4325.
[18] V. N. Vapnik, Statistical learning theory. In S. Haykin (Ed.), Adaptive and learning systems for signal processing, communications and control. John Wiley and Sons, (1998).
[19] B. Lela, D. Bajić, S. Jozić, Regression analysis, support vector machines, and Bayesian neural network approaches to modeling surface roughness in face milling, Int J Adv Manuf Technol 42 (2009) 1082–1088.
[20] C. Campbell, Kernel methods: a survey of current techniques, Neurocomputing 48 (2002) 63–84.
[21] V.N. Vapnik, The Nature of Statistical learning Theory, Springer, New York, (1995).
[22] A.J. Smola, B. Scholkopf, A tutorial on support vector regression, Stat. Comput. 14 (3) (2004) 199– 222.
[23] F. Parrella, Online support vector regression, A thesis presented for the degree of Information Science, University of Genoa, Italy, (2007).
| ||
|
آمار تعداد مشاهده مقاله: 851 تعداد دریافت فایل اصل مقاله: 1,017 |
||