| تعداد نشریات | 24 |
| تعداد شمارهها | 851 |
| تعداد مقالات | 7,575 |
| تعداد مشاهده مقاله | 13,413,748 |
| تعداد دریافت فایل اصل مقاله | 11,580,453 |
A novel method for laser forming of two-step bending of a dome shaped part | ||
| Iranian Journal of Materials Forming | ||
| مقاله 1، دوره 4، شماره 2، دی 2017، صفحه 1-14 اصل مقاله (833.68 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2017.4288 | ||
| نویسندگان | ||
| M. Safari* 1؛ M. Farzin2؛ H. Mostaan3 | ||
| 1Arak University of Technology | ||
| 2Isfahan University of Technology, Department of Mechanical Engineering | ||
| 3Department of Materials and Metallurgical Engineering, Faculty of Engineering, Arak University, Arak, Iran | ||
| چکیده | ||
| In recent decades, one of the challenges in sheet metal forming was production of two-step bending surfaces without mechanical tools and external force or by a combination of heat source and mechanical tools. Forming with a heat source such as laser beam has the potential for forming arbitrary 3D shapes such as two-step bending surfaces. In this paper a novel method for laser forming of complicated two-step bending dome shaped part is proposed. The initial sheets are made from mild steel with thickness of 0.85 mm. In this method, combination of simple straight lines leads to production of a two-step bending dome shaped part. The results of this paper show that the proposed method is a powerful irradiating scheme for production of two-step bending dome shapes with considerable deformations and symmetries. In addition, using an analytical study the mechanics of plate deformation is precisely investigated. All of investigations are performed experimentally and numerically and it is shown that numerical results are in good agreement with experimental observations. | ||
| کلیدواژهها | ||
| Laser forming؛ Two-step bending؛ Dome shaped part | ||
| مراجع | ||
|
[1] Moradi, M., Ghoreishi, M., Torkamany, M.J., Sabbaghzadeh, J. and Hamedi, M.J., An Investigation on the effect of pulsed Nd: YAG laser welding parameters of stainless steel 1.4418, Advanced Materials Research 383 (2012) 6247-6251.
[2] Moradi, M., Golchin, E., Investigation on the effects of process parameters on laser percussion drilling using finite element methodology; statistical modelling and optimization, Latin American Journal of Solids and Structures 14 (3) ( 2017) 464 – 484.
[3] Khorram, A., Jafari, A. and Moradi, M., Laser brazing of 321 and 410 stainless steels using BNi-2 nickel-based filler metal, Modares Mechanical Engineering 17(1) (2017) 127-135 (in Persian).
[4] Salimianrizi, A., Foroozmehr, E., Badrossamay, M. and Farrokhpour, H., Effect of Laser Shock Peening on surface properties and residual stress of Al6061-T6, Optics and Lasers in Engineering 77 (2016) 112–117.
[5] Mostaan, H., Shamanian, M. and Safari, M., Process analysis and optimization for fracture stress of electron beam welded ultra-thin FeCo-V foils, The International Journal of Advanced Manufacturing Technology 87(1) ( 2016) 1045–1056.
[6] Safari, M. and Mostaan, H., Experimental and numerical investigation of laser forming of cylindrical surfaces with arbitrary radius of curvature, Alexandria Engineering Journal 55(3) (2016) 1941–1949.
[7] Safari, M., Mostaan, H. and Farzin, M., Laser bending of tailor machined blanks: Effect of start point of scan path and irradiation direction relation to step of the blank, Alexandria Engineering Journal 55(2) (2016) 1587–1594.
[8] Ueda, Y., Murakawa, H., Mohamed, R.A., Okumoto, Y. and Kamichika, R., Development of computer-aided process planning system for plate bending by line heating (report1), J. Ship. Prod. 10 (1994) 239–247.
[9] Jang, C.D. and Moon, S.C., Analgorithm to determine heating lines for plate forming by line heating method, J. Ship. Prod. 14 (1998) 238–245.
[10] Yu, G., Patrikalakis, N. M. and Maekawa, T., Optimal Development of Doubly Curved Surfaces. Comp. Aid. Geom. Design. 17 (2000) 545– 577.
[11] Ishiyama, M. and Tango, Y., Advanced line-heating processes for hull-steel assembly. J. Ship. Prod. 16 (2000) 121–132.
[12] Hennige, T., Development of irradiation strategies for 3D-laser forming. J. Mater. Process. Technol. 103 (2000) 102–108.
[13] Shin, J. G. and Lee, J. H., Nondimensionalized relationship between heating conditions and residual deformations in the line heating process. J. Ship. Res. 46 (2002) 229–238.
[14] Kim, J. and Na, S. J., Development of irradiation strategies for free curve laser forming. Opt. Laser. Tech. 35 (2003) 605–611.
[15] Liu, Ch., Yao, Y. L. and Srinivasan, V., Optimal Process Planning for Laser Forming of Doubly Curved Shapes. J. Manuf. Sci. Eng. 126 (2004) 1-9.
[16] Zhang, P., Guo, B. and Shan, D. B., FE simulation of laser curve bending of sheet metals. J. Mater. Process. Technol. 184 (2007) 157–162.
[17] Kim, J. and Na, S. J., 3D laser-forming strategies for sheet metal by geometrical information, Opt. Laser. Tech, 41 (2009) 843-852.
[18] Chakraborty, Sh. Sh., Racherla, V. and Nath, A. K., Parametric study on bending and thickening in laser forming of a bowl shaped surface. Opt. Laser. Eng. 50 (2012) 1548–1558.
[19] Safari, M. and Farzin, M., Experimental investigation of laser forming of a saddle shape with spiral irradiating scheme, Opt. Laser. Tech, 66 (2015) 146-150. | ||
|
آمار تعداد مشاهده مقاله: 1,413 تعداد دریافت فایل اصل مقاله: 1,105 |
||