| تعداد نشریات | 24 |
| تعداد شمارهها | 859 |
| تعداد مقالات | 7,631 |
| تعداد مشاهده مقاله | 13,515,819 |
| تعداد دریافت فایل اصل مقاله | 11,638,171 |
Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation | ||
| Iranian Journal of Materials Forming | ||
| مقاله 6، دوره 3، شماره 1، تیر 2016، صفحه 65-74 اصل مقاله (1.15 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2016.3711 | ||
| نویسندگان | ||
| Nazanin Bayat Tork1؛ Seyed Hossein Razavi* 2؛ hassan Saghafian1؛ Reza Mahmudi3 | ||
| 1School of Metallurgy and Materials Engineering, Iran University of Science and Technology | ||
| 2School of Metallurgy and Materials Engineering Iran University of Science & Technology | ||
| 3School of Metallurgical and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| چکیده | ||
| The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained after 2 passes of SSE, resulted in high SRS index (m-value) of 0.4 at 723 K. The calculated activation energy for 2 passes deformed alloy is 116 kJ/mol which is higher than the activation energy of grain boundary diffusion in magnesium (75 kJ/mol). This higher amount of activation energy can be attributed to the presence of gadolinium in this alloy. This SRS index together with an activation energy of 116 kJ/mol are indicative of a superplastic deformation behavior dominated by grain boundary sliding accommodated by grain boundary diffusion at 723 K. | ||
| کلیدواژهها | ||
| severe plastic deformation؛ Simple Shear Extrusion؛ Superplasticity؛ Shear punch test | ||
| مراجع | ||
|
[1] M. Kawasaki, R.B. Figueiredo, C. Xu, T.G. Langdon, Developing superplastic ductilities in ultrafine-grained metals, Metallurgical and Materials Transactions A, 38 (2007) 1891–1898.
[2] P. Wang, L.H. Wu, S.K. Guan, Effect of initial microstructure on superplastic deformation of AZ70 magnesium alloy, Transactions of Nonferrous Metals Society of China, 20 (2010) s527–s532.
[3] A. Smolej, B. Skaza, M. Fazarinc, Determination of the strain-rate sensitivity and the activation energy of deformation in the superplastic aluminium alloy, RMZ – Materials and Geoenvironment, 56 (2009) 389–399.
[4] N. Balasubramanian, T.G. Langdon, An analysis of superplastic flow after processing by ECAP, Materials Science and Engineering A, 411 (2005) 476–479.
[5] R. Alizadeh, R. Mahmudi, T.G. Langdon, Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing, Journal of Materials Research and Technology, 3 (2014) 228–232.
[6] L. Li, X.M. Zhang, Microstructure and texture evolution during high-strain-rate superplastic deformation of coarse-grained Mg-Gd-Y-Zr rolled sheet, Transactions of Nonferrous Metals Society of China, 21 (2011) 1491–1497.
[7] N. Hort, Y. Huang, D. Fechner, M. Störmer, C. Blawert, F. Witte, C. Vogt, H. Drücker, R. Willumeit, K.U. Kainer, F. Feyerabend, Magnesium alloys as implant materials – Principles of property design for Mg – RE alloys, Acta Biomaterialia, 6 (2010) 1714–1725.
[8] N. Stanford, D. Atwell, M.R. Barnett, The effect of Gd on the recrystallisation , texture and deformation behaviour of magnesium-based alloys, Acta Materialia, 58 (2010) 6773–6783.
[9] N. Stanford, G. Sha, J.H. Xia, S.P. Ringer, M.R. Barnett, Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium, Scripta Materialia, 65 (2011) 919–921.
[10] N. Stanford, M.D. Callaghan, B. de Jong, The effect of rare earth elements on the behaviour of magnesium-based alloys: Part 1-Hot deformation behaviour, Materials Science and Engineering A, 565 (2013) 459–468.
[11] N. Stanford, The effect of rare earth elements on the behaviour of magnesium-based alloys: Part 2 - recrystallisation and texture development, Materials Science and Engineering A, 565 (2013) 469–475.
[12] N. Stanford, M.R. Barnett, The origin of ‘rare earth’ texture development in extruded Mg-based alloys and its effect on tensile ductility, Materials Science and Engineering A, 496 (2008) 399–408.
[13] N. Stanford, D. Atwell, A. Beer, C. Davies, M.R. Barnett, Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys, Scripta Materialia, 59 (2008) 772–775.
[14] N. Stanford, I. Sabirov, G. Sha, A. La Fontaine, S.P. Ringer, M.R. Barnett, Effect of Al and Gd solutes on the strain rate sensitivity of magnesium alloys, Metallurgical and Materials Transactions A, 41A (2010) 734–743.
[15] K. Matsubara, Y. Miyahara, Z. Horita, T.G. Langdon, Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP, Acta Materialia, 51 (2003) 3073–3084.
[16] R.B. Figueiredo, M. Kawasaki, C. Xu, T.G. Langdon, Achieving superplastic behavior in fcc and hcp metals processed by equal-channel angular pressing, Materials Science and Engineering A, 493 (2008) 104–110.
[17] R. Mahmudi, H. Mhjoubi, P. Mehraram, Superplastic indentation creep of fine-grained Sn-1%Bi alloy, International Journal of Modern Physics B, 22 (2008) 2905–2913.
[18] R. Mahmudi, R. Alizadeh, A.R. Geranmayeh, Enhanced superplasticity in equal-channel angularly pressed Sn–5Sb alloy, Scripta Materialia, 64 (2011) 521–524.
[19] M. Karami, R. Mahmudi, Shear punch superplasticity in equal-channel angularly pressed Mg-12Li-1Zn alloy, Materials Science and Engineering A, 576 (2013) 156–159.
[20] M. Sarebanzadeh, R. Roumina, R. Mahmudi, G.H. Wu, H.R. Jafari Nodooshan, Enhancement of superplasticity in a fine-grained Mg–3Gd–1Zn alloy processed by equal-channel angular pressing, Materials Science and Engineering A, 646 (2015) 249–253.
[21] R. Alizadeh, R. Mahmudi, Evaluating high-temperature mechanical behavior of cast Mg–4Zn–xSb magnesium alloys by shear punch testing, Materials Science and Engineering A, 527 (2010) 3975–3983.
[22] N. Pardis, R. Ebrahimi, Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique, Materials Science and Engineering A, 527 (2009) 355–360.
[23] N. Pardis, R. Ebrahimi, Different processing routes for deformation via simple shear extrusion (SSE), Materials Science and Engineering A, 527 (2010) 6153–6156.
[24] J.D. Robson, Effect of rare-earth additions on the texture of wrought magnesium alloys: The role of grain boundary segregation, Metallurgical and Materials Transactions A, 45 (2014) 3205–3212.
[25] N. Bayat Tork, S.H. Razavi, H. Saghafian, R. Mahmudi, Microstructural evolution and mechanical properties of the as-cast and extruded Mg-Gd alloys, Advanced Engineering Materials, 18 (2016) 156–161.
[26] S.S. Vagarali, T.G. Langdon, Deformation mechanisms in h.c.p. Metals at elevated temperatures-I. Creep behavior of magnesium, Acta Metallurgica, 29 (1981) 1969–1981.
[27] J.M. Robinson, M.P. Shaw, Microstructural and mechanical influences on dynamic strain aging phenomena, International Materials Reviews, 39(1994) 113–122.
[28] T.G. Langdon, A unified approach to grain boundary sliding in creep and superplasticity, Acta Metallurgica et Materialia, 42 (1994) 2437–2443.
[29] X. Zhang, L. Li, Y. Deng, N. Zhou, Superplasticity and microstructure in Mg-Gd-Y-Zr alloy prepared by extrusion, Journal of Alloys and Compounds, 481 (2009) 296–300.
[30] L. Li, X. Zhang, Hot compression deformation behavior and processing parameters of a cast Mg-Gd-Y-Zr alloy, Materials Science and Engineering A, 528 (2011) 1396–1401. | ||
|
آمار تعداد مشاهده مقاله: 1,398 تعداد دریافت فایل اصل مقاله: 1,578 |
||