| تعداد نشریات | 24 |
| تعداد شمارهها | 935 |
| تعداد مقالات | 8,388 |
| تعداد مشاهده مقاله | 16,988,541 |
| تعداد دریافت فایل اصل مقاله | 14,377,079 |
DESIGN OF THE DIE PROFILE FOR THE INCREMENTAL RADIAL FORGING PROCESS | ||
| Iranian Journal of Science and Technology Transactions of Mechanical Engineering | ||
| مقاله 8، دوره 39، M1، تیر 2015، صفحه 89-100 اصل مقاله (242.55 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijstm.2015.2951 | ||
| نویسندگان | ||
| M. AFRASIAB1؛ H. AFRASIAB* 2؛ M.R. MOVAHHEDY3؛ G. FARAJI1 | ||
| 1School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, I. R. of Iran | ||
| 2Mechanical Engineering Department, Babol University of Technology, Babol, I. R. of Iran | ||
| 3Center of Excellence in Design, Robotics, and Automation, Department of Mechanical Engineering, Sharif University of Technology, Azadi Ave., Tehran, I. R. of Iran | ||
| چکیده | ||
| In this paper, based on the slab method of analysis, a novel and general approach is developed for studying the radial forging process with curved profile dies. The presented approach is not only more general with respect to previous studies, but it is also easier to understand and use and can be efficiently used for optimization of the die profile depending on the forging geometry and conditions. The obtained general equations reduce to those obtained in previous studies for the special case of linear dies. The process is also simulated by the finite element method to further enhance the results of the study. The obtained results provide useful information for the optimal design of the radial forging die. | ||
| کلیدواژهها | ||
| Radial forging؛ slab method؛ Finite element method؛ die profile design | ||
|
آمار تعداد مشاهده مقاله: 3,082 تعداد دریافت فایل اصل مقاله: 3,332 |
||