| تعداد نشریات | 24 |
| تعداد شمارهها | 851 |
| تعداد مقالات | 7,575 |
| تعداد مشاهده مقاله | 13,413,753 |
| تعداد دریافت فایل اصل مقاله | 11,580,454 |
Evaluation of Effective Paramters on Formability of TWB | ||
| Iranian Journal of Materials Forming | ||
| مقاله 2، دوره 2، شماره 1، تیر 2015، صفحه 11-17 اصل مقاله (265.27 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22099/ijmf.2015.2911 | ||
| نویسندگان | ||
| A. Nayebi* ؛ A.H. Khosravi | ||
| Department of Mechanical Engineering, Shiraz University, Shiraz, Iran | ||
| چکیده | ||
| Formability of automotive friction stir welded TWB (tailor welded blank) sheets is numerically investigated in biaxial stretching based on hemispherical dome stretch (HDS) test in four automotive sheets of Aluminum alloy 6111-T4, 5083-H18, 5083-O and DP590 steel, having different thicknesses. The effects of the weld zone modeling and the thickness ratio on formability are evaluated. In order to carry out the numerical simulations, mechanical properties are considered according to Chung et al. [11] experimental results. von-Mises and Hill’48 quadratic yield functions are used to compare the isotropic and anisotropic behaviors of the used sheets. In order to simplify the problem, the anisotropy of the weld zone is ignored. The FEM results are compared with experimental results of [11]. Anisotropic assumption for base materials and varying thickness for the weld zone give more accurate prediction. Numerical results are in good agreement with the experimental results. Failure onset locations and patterns are accurate. Since the formability is dependent on the stress concentration, asymmetric distribution of strength and complexity of weld zone properties, the thickness ratio in TWB affect formability. | ||
| کلیدواژهها | ||
| TWB؛ HDS, Anisotropic, Forming, FSW | ||
| مراجع | ||
|
[1] A. Zadpoor, Tailor-made blanks for the aircraft industry, Ph.D thesis, Delf university, (2010). [2] Y. Shi, Z. Lin, P. Zhu and S. Han, Impact modeling of the weld line of tailor-welded blank, Materials and Design, 29 (2008) 232–238. [3] S. D. Raymond, P. M. Wild and C. J. Bayley, On modeling of the weld line in finite element analyses of tailor welded blank forming operations, Journal of Materials Processing Technology, 147 (2004), 28–37. [4] K. M. Zhao, B. K. Chun and J. K. Lee, Finite element analysis of tailor-welded blanks. Finite Elements in Analysis and Design, 37(2) (2001) 117–130. [5] A. Zadpoor, J. Sinke and R. Benedictus, Finite element modeling and failure prediction of friction stir welded blanks, Materials and Design, 30 (2009) 1423–1434. [6] G. Liu, L. E. Murr, C. S. Niou, J. C. McClure and F. R. Vega, Microstructural aspects of the friction-stir welding of 6061-T6 aluminum, Scripta Mater, 37 (1997) 355–361. [7] S. M. Chan, L. C. Chan and T. C. Lee, Tailor-welded blanks of different thickness ratios effects on forming limit diagrams, Journal of Materials Processing Technology, Vol. 132(1–3) (2003) 95–101. [8] S.K. Panda, D.R. Kumar, H. Kumar and A.K. Nath, Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming, Journal of Materials Processing Technology, 183 (2007) 321–332. [9] R.P. Manabhan, M.C. Oliveira and L.F. Menezes, Deep drawing of aluminium–steel tailor-welded blanks, Materials and Design, Vol. 29 (2008) 154–160. [10]D. Kim, W. Lee, J. Kim, K.H. Chung, C. Kim, K. Okamoto, R.H. Wagoner and K. Chung, Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets: Part II – Formability, International Journal of Solids and Structures , 47 (2010) 1063-1081. [11]K. Chung, W. Lee, D. Kim, J. Kim, K. H.Chung, C. Kim, K. Okamoto and R. H. Wagoner, Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets: Part I – Material properties, International Journal of Solids and Structures, 47 (2010) 1048–1062. | ||
|
آمار تعداد مشاهده مقاله: 1,159 تعداد دریافت فایل اصل مقاله: 2,182 |
||